Restringing a Craftsman gas trimmer requires following the instructions in the trimmer’s manual. Generally, however, the process can be broken down into the following steps.
1. Cut the existing line: Find the spool of string on the trimmer. Remove the spool, and cut the existing line with a pair of scissors.
2. Re-spool the line: Place the new line onto the spool. Take notice of which direction the line winds on the spool. Ensure that the line is wrapping correctly around the spool.
3. Attach the spool: Once the spool is adequate full and securely attached, re-attach the spool to the trimmer.
4. Re-thread the line: Manipulate the line so that one end is placed in the correct notch and make sure the other end is coming out of the plastic head.
5. Tighten the line: Replace the spool’s cap and pull both ends of the line until there is tension on the line. Make sure to securely tighten the cap fixing the line in position.
6. Test the trimmer: Once the line has been correctly attached, pull the starter cord to test the trimmer. If the trimmer does not begin, repeat the steps and make sure that the line is not tangled.
How do you change the line on a Craftsman gas Weedwacker?
To change the line on your Craftsman gas Weedwacker, you will need to start by getting a new spool of line in the size and type recommended for your trimmer model. Most Craftsman gas Weedwacker models use 0.
095-inch line. You’ll also need a pair of safety glasses and some scissors or an knife for cutting the line.
Once you have all your supplies, begin by carefully removing the spool cap from the trimmer. Then you can carefully untangle the remaining line from around the spool and onto the ground. You’ll then need to cut off one end of the new spool of line and thread it through the eyelet in the bottom of the trimmer.
Once the line is threaded through the eyelet, wind the line around the spool in a ‘clockwise’ direction until the spool is nearly full. When the spool is full, cut the other end of the line off, leaving at least 8 inches of extra line.
Next, connect the newly wound spool to the trimmer. Take the end of the line and place it into the eyelet on the cap. Now take the spool cap and carefully unscrew the fastening screws that hold it in place.
Place the cap back on the trimmer and the screws, making sure the line passes through the eyelets on the cap. You should now be able to push the spool cap back into place until it is flush with the trimmer.
Finally, it is time to test the line. Power up the Weedwacker and allow it to idle for a few moments. When the trimmer is running, hold the tip of the trimmer head away from you and gently press the trimmer head against the ground.
This will activate the trimming line and you should see the line come out of the trimmer head. If no line comes out, make sure that the line is securely threaded through the eyelets of the cap and try again.
Once you are satisfied that the line is working properly, you can continue to use the Weedwacker. Just be sure to check the trimmer line regularly and make sure it is not fraying or wearing out. It is also important to trim carefully and avoid hitting hard objects with the trimmer as this can cause damage to the trimmer head.
How do I change trimmer line?
Changing the trimmer line on your trimmer is an easy chore that will help maintain the quality of your trimmer. The steps to change the trimmer line vary based on the model of trimmer you own, but the basic steps are the same.
First, you need the correct size of trimmers line for your particular model. Depending on the model of trimmer, this line can come as a single, two-piece spool, or in pre-cut lengths. Make sure to check the manufacturer’s instructions for the specific line requirements for your model.
Once you have the correct trimmer line, you can begin replacing the old line. Starting with the spool, if your trimmer model has one, remove the old line from the spool. The line will be wound around the spool, so wrap the new line around it in the same direction and snugly, making sure not to overlap the line.
If your trimmer doesn’t have a spool, you can measure out the line yourself and cut it to an appropriate length.
Once the line is in place on the spool, you can attach the spool back to the trimmer. Then move to the head of the trimmer. Here you need to make sure that the head cover is unscrewed. This can also vary by trimmer model, but typically you’ll need to unscrew both the cover and the head itself.
The new trimmer line can then be pulled through the head and then the head and cover can be secured back on the trimmer unit.
Finally, the trimmer must be clamped back together. This ensures that the new trimmer line won’t be pulled from its spool when you start using the trimmer. After this, your trimmer is ready to use with its new line.
Changing trimmer line is a simple maintenance task that keeps your trimmer in its best working condition. Make sure to keep an eye on the trimmer line as it will eventually wear down, and repeating the process is recommended.
What is the toughest trimmer line?
The toughest trimmer line is likely a professional-grade trimmer line that is made of a commercial-grade material, such as diamond-shaped, copolymer nylon, or fluorocarbon. These lines offer superior strength, greater durability and better low-stretch performance than standard trimmer lines.
Professional-grade trimmer lines are more expensive upfront, but they last longer, cutting and trimming even the toughest grass faster and easier. Additionally, they can be used in extreme temperatures and remain flexible and tangle-free over time, giving them a much longer life than regular nylon trimmer lines.
How do you replace the line on a Black and Decker trimmer?
Replacing the line on a Black and Decker trimmer requires a few simple steps. First, be sure to unplug the trimmer from the electrical outlet to avoid potential shock or electric hazard. Once unplugged, remove any debris from the head of the trimmer so it is clean and remove the old line.
To attach a new line, you will need to thread the new line through the hole in the trimmer spool. Refer to your user manual for the specific amount of line to use depending on the trimmer model. Once the line is fed through the spool, pull it so that it wraps tightly and evenly around the spool.
Be sure to pay attention to the orientation of the line before reassembling the trimmer. After the replacement line is threaded properly, you can reassemble the trimmer head, insert the spool in the head and reattach the string head cap.
After that, simply plug the trimmer back in, add fuel and oil as necessary, and you are ready to go!.
How do you put the trimmer line on a Stihl whipper snipper?
Putting the trimmer line on a Stihl whipper snipper is a simple process. First, locate the hub in the center of the cutting head. This is where the trimmer line needs to be threaded. Unscrew the cap and remove any coverings or guards, if any.
Next, take the trimmer line and cut off two lengths of line, each about 8 inches long. Thread one end of the line through one of the holes in the side of the hub and then feed about 6 inches of the line through the other side of the hub.
Take the other line length and feed it into the hub from the same side as the first line. Make sure that the end of each line is pointed in the same direction.
Then, feed the ends of each line through the eyelets in the hub and pull out an extra 1-2 inches of line from each side. This will provide the tension necessary to maximize the cutting capability of the trimmer.
Finally, twist the lines together and secure with a double knot at the center. Then, replace the cap and the guards, if any. That’s it; your Stihl whipper snipper is now ready to use!
What size line does my trimmer use?
The size of line your trimmer uses will depend on the make and model of your trimmer. Generally speaking, there are a few main sizes of line used in trimmers, including 0.065”, 0.080”, and 0.095”. Most electric and battery-powered trimmers use the 0.
065” line, while larger commercial units use the 0.080” and 0.095” sizes. Your trimmer’s manual should have the recommended string size for your machine. The shorter the string, the higher the speed and power the trimmer will have.
Longer strings absorb more power and reduce the cutting speed. Depending on the type of vegetation you are trimming, you may need to use a longer or shorter string to give you the results you need.
Is thicker string trimmer line better?
Thicker string trimmer line is usually considered better, as it can cut tougher grass and weeds. This is because thicker line is made of more durable material that is designed to stand up to heavy use.
Thicker string trimmer line also holds up longer than thinner line, meaning that you’ll get more use out of it before having to replace it. Thicker lines also cut faster and more evenly than thinner lines, so heavier workloads can be completed in shorter amounts of time.
Certain kinds of thicker line are even designed to be shatter-resistant and coil-ingrown, which makes them even more efficient and hard-wearing than thinner string lines. Ultimately, thicker string trimmer line is generally a better choice in terms of durability, efficiency, and overall performance.
Who makes the Craftsman string trimmer?
The Craftsman string trimmer is manufactured by Sears Brands Management Corporation, which is a subsidiary of Transform SR Brands LLC. It has been a trusted name in lawn and garden power tools for almost a century.
The Craftsman string trimmer is a versatile and powerful tool for lawn maintenance and landscaping professionals. A reliable string trimmer helps you quickly and accurately trim grass, weeds, and other vegetation around the home or garden.
Craftsman string trimmers feature an adjustable cutting width and several different power options including electric, gas, or battery models. They offer excellent value for money, with a wide selection of features and attachments to help you get the most out of your trimmer.
Craftsman string trimmers also come with a warranty and outstanding customer service to ensure you’re able to handle whatever comes up while you use your trimmer.
Where are Stihl string trimmers made?
Stihl string trimmers are made in plants and factories located throughout the United States, Germany, Brazil and Switzerland. Founded in 1926 by Andreas Stihl in Germany, Stihl is a renowned manufacturer of outdoor power tools, including chainsaws, trimmers, blowers, edgers and a host of other products for professional contractors and homeowners alike.
In their home country of Germany, Stihl operates two main factories: their original facility located near Stuttgart, and another facility in Kammerstein, Bavaria. Their US production facilities are located in Virginia Beach, Virginia and Adelanto, California.
Stihl also has a facility in Brazil, to meet the needs and cultural tastes of customers in the Brazilian market, and a plant in Switzerland with a research and development center, to develop cutting-edge technologies for the European and global market.
Stihl trimmers made in any of these locations are known worldwide for their quality and reliability, making it a leading name in outdoor power tools.
Who makes Kobalt trimmer?
Kobalt trimmer is made by the Lowe’s Companies, Inc. , a retail home improvement and appliance company based in the United States. Kobalt products, including their popular trimming line, are sold exclusively through Lowe’s Home Improvement stores.
Lowe’s offers a wide variety of Kobalt trimmer models, including electric trimmers, gas trimmers, cordless trimmers, and hand-held trimmers. The various models come with various features and sizes, allowing consumers to choose the trimmer that fits their needs the best.
The Kobalt trimmer line is backed by a two-year warranty and extended products coverage when purchased through a Lowe’s store. Customers can take advantage of Lowe’s effortless returns policy, ensuring satisfaction with their purchase.
Where are Toro cordless tools made?
Toro cordless tools are manufactured in various locations around the world, including the United States, Mexico, China, and other countries. Many of the parts used to assemble Toro cordless tools, such as the batteries and motors, are sourced directly from the manufacturer’s suppliers.
Because of the global sourcing of components, the exact origin of a Toro cordless tool can be difficult to determine. However, most Toro products are assembled at facilities located in the U. S. , Mexico, and China.
Is Toro made by MTD?
No, Toro is not made by MTD. Instead, Toro is owned by the Toro Company, which was founded in 1914 by marketing entrepreneur and engineer, George Toro. The company began by producing engine-powered lawn mowers and was the first to introduce a line of wheeled walk-behind mowers that successfully combine the maneuverability of the walk-behind design with the durability of a tractor.
Today, the Toro Company manufactures a variety of outdoor power equipment including lawnmowers, snow removal equipment, golf course and turf management products, pressure washers, irrigation systems, and more.
In addition, the company manufactures a variety of industrial equipment, construction equipment, and landscape services.
What company owns Toro?
The Toro Company is a global leader in turf and landscape maintenance, with a long-standing history of excellence that dates back to 1914. Toro is owned by Toro Japan, which is a holding company registered in Tokyo, Japan.
The company was founded by CEO and Chairman Mitaro Takahashi, and is today one of the leading turf and landscape maintenance companies in the world. Toro Japan has a wide range of products, including professional turf and landscape equipment, golf course maintenance, irrigation and water management, specialty horticultural equipment, and turf and landscape management software.
Additionally, the company owns several other brands, including Link greensmowers and encore turf equipment. Toro is an international corporation, with operations throughout Asia, Europe, North America, and Australia.
Why did Honda stop making riding mowers?
Honda ceased production of riding mowers in December 2015 after a long history of manufacturing a wide variety of outdoor power equipment. The decision to stop production of riding mowers was likely due to the diminishing returns associated with this product line.
Many of their customers preferred to buy walk-behind mower models instead of the more complex and costly riding mowers. Additionally, Honda had invested significant resources into developing robotics technology for their small engine products, such as lawn mowers, and decided to focus their efforts on this new endeavor instead.
The robotics technology allowed Honda to push their small engine product offerings into more sophisticated models that could be marketed to a wider customer base. Honda invested millions of dollars into the research and development of these robotics mowers and saw them as a way to stay competitive in the rapidly changing outdoor power equipment manufacturing industry.
It appears Honda’s strategy worked. They continue to be a leader in the outdoor power equipment market, offering customers a wide range of options from lawn mowers and trimmers, to generators and pumps.
Despite no longer offering riding mowers, Honda is still providing customers with durable and well-made products designed for a wide range of outdoor tasks.
Who makes Craftsman 25w Weedeater?
The Craftsman 25w Weedeater is a lawn trimmer and edger made by the well-known tool and equipment manufacturer, Craftsman. Craftsman is part of Stanley Black & Decker, a leading global company with over 20,000 employees and over 175 years of history in the tool and equipment industry.
Craftsman’s 25w Weedeater is designed to help homeowners tackle their yard care tasks with a lightweight and easy-to-use toolset. It provides a powerful 25-watt motor for maximum power, and a ten-position cutting head for maximum reachability.
The head also features a tool-less release for easy blade replacement and an onboard stop switch for added safety. Additionally, the craft 25w Weedeater features an adjustable handle and an over-molded grip for comfortable operation.
It is also good for light-duty use and is an affordable and reliable choice for homeowners tackling their lawn care needs.
Does Trimmer Plus work with craftsman?
Yes, Trimmer Plus attachments are designed to work with Craftsman brand string trimmers and other 2-cycle and 4-cycle gas trimmers. Trimmer Plus offers a variety of attachments for Craftsman string trimmers, including edgers, brush cutters, cultivators, hedge trimmers, blowers, and more.
All Trimmer Plus attachments can be quickly adapted to fit Craftsman trimmers with the simple installation of the included coupler. The coupler is compatible with all Craftsman trimmers and other major brands.
Trimmer Plus attachments are easy to install and use, making it an ideal choice for those who want to get more use out of their Craftsman string trimmer. Whether you’re looking to tackle a specific project like edging a sidewalk or trimming a hedge, Trimmer Plus has an attachment that can help you get the job done efficiently and safely.