Screwing a pegboard to the wall is a fairly straightforward and easy process. First, make sure the area where you plan on installing the pegboard is clean and free of any dust or debris. Mark the area with a pencil where you want the pegboard to go, accounting for any window frames, outlets, or other obstacles.
Next, you’ll need to purchase some pegboard screws. These are specifically designed for pegboard applications and have a small split and thread on the tip. Once you have your screws, you’ll need to pre-drill the holes in the pegboard.
If you’re using a wooden pegboard, pre-drill 1/8” holes in the center of each hole where your screws will go.
Now you can attach your pegboard to the wall. Make sure the top and bottom edges of the pegboard are level and use the previously pre drilled holes to attach it to the wall. Start at the top and work your way down, tightening the screws after each one is inserted.
Once all your screws are in place, you can trim off any excess pegboard material with a razor blade or better yet, a pair of tin snips.
Finally, you can insert your hooks or shelves into the pegboard and start organizing. By following these instructions and using the proper screws for your application, you should have a nice, secure pegboard install that’s ready for years of use.
Can you hang pegboard directly on studs?
Yes, it is possible to hang pegboard directly on studs. The key is to use heavy-duty screws that are specifically designed for pegboard. For example, you can purchase pegboard mounting screws that come with special self-tapping heads, which are designed to seat neatly into the back of a pegboard, as well as the head of the screw.
To install a pegboard on studs, start by finding the center of the wall, and then hold the pegboard up against the wall and mark where the studs are located. Then, pre-drill holes where you marked the studs, and then insert and tighten the screws.
Be sure to leave enough space between each screw so that the pegboard can hang flush against the wall.
How much gap is behind pegboard?
The amount of gap behind a pegboard depends on the size of the pegboard and material used for the pegboard. Generally speaking, pegboards consist of a thin backing — usually cardboard or wood — with small holes drilled into it.
Then, pegs are inserted through the holes, creating an organized system for items to hang on. The gap behind the pegboard is usually only about 1/4 inch or less, but could be larger depending on the size of the pegs used.
Additionally, when two pegboards are mounted side-by-side, there could be more of a gap due to the thickness of the pegboard material in between.
Do you need furring strips for pegboard?
Furring strips are not absolutely necessary for pegboard, but they are recommended for the optimal installation of pegboard components. Furring strips provide a flat surface to which the pegboard can be securely mounted.
Without furring strips, the pegboard may bow or warp when mounted, and any components attached to it will not have a secure fit. If wall studs are not available, furring strips should always be used.
Furring strips also provide extra support, stability and strength to the entire pegboard installation. If you are mounting heavy items to the pegboard, such as tools, considering using furring strips to ensure your pegboard is secure.
Finally, using furring strips can help to make sure that the pegboard is level and properly lined up.
What can I use instead of Pegboard hooks?
Instead of Pegboard hooks, you can use a variety of other methods and materials to hang items on a Pegboard. Examples include: simple hooks, loop hooks, peg hook locks, double loops, bins, utility hooks, and tool holders.
For larger items such as ladders or power tools, you could use manual hoist systems or storage hangers, which are designed to securely suspend heavy tools from a Pegboard. If you’re looking for something with a longer lasting grip, you could use adhesive strips, 3M Command Strips, or double sided tape.
There are also specially designed pegs with strong adhesive, which can be mounted into the Pegboard and used to hang multiple items. Finally, there are many specialty craft, home and kitchen items available that are made to be hung on a Pegboard – so you could also use these.
What is standard pegboard hole size?
The standard size for a pegboard hole is 1/8 of an inch in diameter. These holes are located on pegboard panels and are designed to accommodate pegboard hooks and other accessories. The uniform size and spacing of the holes allows accessories to be rearranged to meet the changing needs of the user.
Pegboard panels are typically made of either metal, vinyl-coated metal, plastic, or hardboard and come in a variety of sizes. The 1/8 of an inch size is also referred to as 1/4 inch on center, as the holes are spaced a quarter of an inch (1/4) apart from one another, designed to fit pegs that have a 1/4 inch diameter.
Some pegboard systems also use a hole size of 3/16 of an inch, but the 1/8 inch size is the most commonly used size for pegboard hole spacing.
How wide is pegboard holes?
The standard width of a pegboard hole is 1/8 inches. It typically measures. 14 inches, with a standard tolerance of. 004 inches. The center of each hole is 3/16 inches apart. Pegboard holes come in many different sizes and shapes, but the spacing between the holes is universally 3/16 inches.
Some pegboard is drilled with more closely-spaced, 1/16 inch holes. These specialty pegboards are typically used for applications that require smaller, lighter items to be hung or stored.
How much weight can pegboard hold?
The amount of weight that pegboard can hold is highly variable and depends on a variety of factors. The main contributing factors include the type of pegboard, type of fastener being used, the number of fasteners used, the size and length of the fasteners, and the type of items that are being hung.
The pegboard substrate material provisions will also play a primary role in determining the load capacity; for instance, structures made of particle or fiberboard feature low holding values due to low structural strength and inferior holding power compared to those made of wood.
On average, pegboard panels made of particle or fiberboard can hold loads between 10 and 40 pounds. Wood pegboard panels, on the other hand, have a much higher load-bearing capacity, usually somewhere between 30 and 50 pounds as long as they are suitably fastened with appropriate-length fasteners.
That said, if the fasteners used exceed 1.5 inches and the objects being hung are less than 10 pounds, wooden pegboard is able to bear even more weight.
In certain cases, pegboard can even bear heavy loads of up to 100 pounds, though this is heavily dependent on the structural frame where the pegboard is hung and how the pegboard and items hanging on it are fastened securely.
For higher holding values, it is important to make sure that the wall used is strong and the fasteners used are securely in place.
How thick are pegboard spacers?
The thickness of a pegboard spacer depends on the size of the pegboard and the size of the hole. On average, pegboard spacers are between 1/8 and 5/16 of an inch thick. The most common pegboard spacers tend to be between 1/4 to 1/2 an inch thick.
Smaller pegboard uses thinner spacers while thicker ones are used on large wall panels. Additionally, some manufacturers produce plastic pegboard spacers that are up to 1/2 inch thick.
How do you hang pegboard with Command Strips?
Hanging Pegboard with Command Strips is a straightforward process that can be done with a minimal amount of supplies. Before beginning the process, make sure to have the following supplies:
• Pegboard of your preferred size and thickness
• Pencil and level
• Command Strips of the appropriate size and quantity
• Appropriate screws
• Screwdriver
First, decide where you’d like to hang your Pegboard and mark the area on the wall. Using a level, double-check to make sure the area is marked evenly. Next, determine the area’s weight capacity and the number of Command Strips needed to secure the Pegboard.
Larger and heavier Pegboard will need more Command Strips for extra security. Once you’ve determined this information, you can begin attaching the Command Strips to your Pegboard.
For the most secure hold, use 4 Hooks with Strips Home & Office strips. Begin by sticking one end of the strip to the Pegboard and the other end to the wall. Make sure to keep the strip close to the Pegboard – at least 1/8” away – and keep it tucked away so it isn’t seen when the Pegboard is on the wall.
After all of the Command Strips have been applied to the Pegboard, it’s time to hang the Pegboard. Lift the Pegboard carefully and press it into the wall. The strips should securely hold the board in place.
If you want an extra secure hold, use screws. Carefully mark the wall so you know where the screws should go then use a screwdriver to attach the Pegboard to the wall. Take your time and make sure not to over-tighten the screws.
With these steps, your Pegboard should be securely hung with Command Strips and ready for use!