If your blinds are too long, you can shorten them in a few simple steps. First, pull the blind cords down and raise the blinds to the desired length. Next, cut and remove the excess length of blind slat string with a pair of scissors.
Once the long cords are removed, tie a knot in the pull cords, as close to the bottom of the blinds as possible. Finally, with the blinds at the shorter length, secure the edges of the blinds to the window frame with a blind clip or staple gun.
If the blinds have a tension device at the bottom, unthread it and remove the excess fabric and reinstall. By following these steps, you should be able to easily shorten blinds that are too long.
Can you cut blinds yourself?
Yes, it is possible to cut blinds yourself. While it is not recommended for anyone without the proper tools, safety equipment, and knowledge, it can be done. The only type of blinds that can be cut with any level of accuracy and safety are faux wood blinds.
Be sure to measure the window opening and then subtract an inch or two from each side to make sure the blind fits inside the opening. Then, use a miter saw or hand saw to carefully cut the faux wood blind to the right size.
Sand the cut edge if necessary and then attach the bottom rail and mounting brackets. Be sure to read all instructions before cutting. Finally, attach the head rail and window fixtures, then hang the blind and adjust the slats.
Can you cut blinds to make them shorter?
Yes, you can cut blinds to make them shorter. Before cutting, it is important to ensure the blinds you are cutting are meant to be trimmed and read the manufacturer’s instructions to complete the process properly.
When cutting, measure the length of your window carefully to make sure you have the right measurements. To trim the blinds, use either a pair of scissors or a handheld saw. When cutting, measure off the additional length you want to trim and make sure you leave a few extra inches at the end that can be cleaned up with a file.
Once the length has been marked, cut away the excess material. If needed, you can install metal ladders or hold-down brackets to secure the blinds in place. After the blinds have been trimmed, use a file or sandpaper to smooth off and remove any burrs from the blinds.
Finally, check and adjust the tilt operation if necessary.
How do you cut vinyl blinds at home?
Cutting vinyl blinds at home can be achieved fairly easily with the right tools and preparation. Before cutting your blinds, measure the window carefully so that you know what size the blinds need to be and where you need to cut them.
Once you know the exact measurements, transfer these measurements to the blind and use an X-Acto knife or a utility knife (depending on the size of the blind) to cut the vinyl blinds. Make sure to use gentle pressure and use a ruler as a guide to ensure a straight cut.
Additionally, it can be helpful to cover the blind with a piece of cardboard to protect the vinyl from scratches or cuts and to be more certain about where you place the blade. After cutting the blind, use a file or a piece of sandpaper to smooth out the edges of the cut.
Finally, remeasure the blind and double check to make sure that the measurement is accurate.
Can faux wood blinds be cut?
Yes, faux wood blinds can be cut. This is an easy process as long as you have the right tools and take your time. First, before you start cutting, you’ll need to measure your windows carefully to make sure you get the right size.
Once you have your measurements, you can begin cutting your blinds and will need to use either a handsaw or a motorized saw to accurately cut through the material. Be sure to wear safety glasses and a dust mask, and cut slowly and carefully to avoid any mistakes or accidents.
Once you have the correct size slats, use a clamp(s) to hold them in place, and then you’ll need a handsaw or a sawzall to cut them to the desired size. Remember to take your time and measure twice to ensure a precise fit.
After the blinds are cut, you may need to sand them for a smooth finish. Finally, fit the blinds into your windows and adjust as needed.
Will Lowes cut blinds for you?
Yes, Lowe’s will cut your blinds for you in most locations. Many Lowe’s stores offer a free measure and install service, which includes cutting the blinds to fit your windows. The free service only applies to specific brands of window treatments offered by Lowe’s, so you will need to check with your local store to find out which ones qualify.
Additionally, Lowe’s store associates may be able to cut custom blinds for a fee, depending on the materials and size of the blinds. It is always best to call in advance to check with the store about any cutting services they may have available.
Why are my cordless blinds so hard to pull down?
It is possible that the blinds have been installed incorrectly, or that they have become warped over time due to changes in temperature or humidity. Old age cannot be ruled out with window treatments, as the fabric and mechanisms can become worn out and difficult to operate if they haven’t been well maintained.
Additionally, it is also possible that the spring in the roller system has become too tight and is making it difficult to move the blinds. In any case, you should check to make sure that all the pieces that make up the window treatment are present and in good condition, including the pull cords, the spring mechanism, and the brackets.
If these components are in working order, you may need to loosen the spring by carefully adjusting the spring tension. If it still feels too tight or difficult to operate, a professional installer should be consulted.
How do you fix a cordless blind that won’t go up?
If your cordless blind won’t go up, the first step is to check the internal mechanisms of the blind. If there is dust and dirt inside, this can cause it to get stuck and not go up. You will need to use a vacuum cleaner to clean it, or alternatively, open up the blind headrail and clean it manually.
If there is no visible dirt or dust, the motor may be stuck or not working properly. You should try to press the up button again, as sometimes they can become jammed. If this doesn’t work, you may need to replace the motor.
The final step is to check the battery. If the battery isn’t functioning properly, it can cause the blind to stop working when trying to move it up. If the battery has done its course, you should replace it with a new one.
In summary, if your cordless blind won’t go up, you should check the internal mechanisms, the motor, and the battery. Once you have done this, you should be able to fix the blind.
How much longer should your blinds be?
The length of your blinds should be determined by the size of your window, as well as the type of blinds that you are installing. Generally, it’s best to have the blinds hang just a few inches longer than the window frame itself, to ensure there is optimal coverage and no light gaps.
The length of full-length vertical blinds is also determined by the size of the window and the drop of the blind desired – the greater the window size, the longer the blinds should be and the greater the desired drop, the longer the blinds will need to be.
Additionally, for roman blinds, the fabric should extend at least 6 inches above and below the window, though this additional length is typically hidden. Finally, for roller blinds, the blinds should be slightly longer than the window to ensure that the blinds are secured easily at the top, as well as to provide additional coverage.
What if window blinds too long?
If your window blinds are too long for your window frame, there are a few steps you can take to adjust them. First, measure the window frame. This will give you an idea of how much of the blind needs to be trimmed.
If necessary, you can trim the excess using scissors or a small cutting tool. Make sure to trim off small amounts of the blind at a time until it fits properly. After the blind has been trimmed, you can reinstall it in the window frame and adjust the cord length if needed.
Additionally, you can use an adhesive to secure the blind in the frame so it won’t move around. Following these steps can help ensure your window blinds fit properly and look great.
Do blinds have to be exact length?
No, blinds do not have to be exact length. One option is to use a blinds clip which works by clipping onto the end of the blinds to create a uniform and secure fit. Another option is to order a custom-made blind to get the exact size and length desired.
Finally, there are also several products that can help extend the length of an existing blind, such as an extension bracket or an extension rod. Ultimately, the decision on how to handle blinds that are not exact length is a personal preference and should be based on the desired look.
What size blinds do I need for a 35 inch window?
The size of the blinds you will need for a 35 inch window depends on the type of blind you plan to use. For example, if you are considering roller shades, a good rule of thumb is to take the width of the window and add four inches, so for a 35 inch window, you will want to purchase roller shades that measure 39 inches.
If you are looking into horizontal or mini blinds, you should take the width of the window and add three and a half inches. In that case, you should purchase a blind with a width of 38 and a half inches.
However, it’s best to double-check the measurements with the manufacturer, as sizing varies depending on the brand.
How do you know what size blinds to buy?
When it comes to knowing what size blinds to buy, there are several key considerations. First, figure out your budget. Blinds can range from a few dollars each to hundreds of dollars depending on the material, size, and color.
Next, measure each window. Measure the length, width and depth of the window. Be sure to double-check measurements and make sure you are accurate. Once you have the measurements, select a type of blind for the job.
Different materials, colors, or textures might work better for different rooms or applications, so consider what you want from your blinds. Next, decide if you need an inside mount or an outside mount.
Inside mount blinds will fit inside the width and length of the window frame, while outside mount blinds will measure from the outside of the frame and will cover more window area. Lastly, select the size of blinds that best fits your measurements and order them.
You will likely have a few options for each size, such as width and length. Make sure the ones you select will fit in the window you ordered them for and that your budget stays in check. With these tips, you should be able to pick the right size blinds for your window.
How much should I subtract for inside mount blinds?
When measuring for inside mount blinds, the most important measure is the depth of the inside of the window frame. This is the amount that needs to be subtracted from the width and height of your window.
Generally, the amount that will need to be subtracted for an inside mount is 1/4 inch for each side. For example, if your window opening is 48″ wide and 48″ high, you will need to subtract 1/4 inch on each side for the width, and 1/4 inch on the top and bottom of the window for the height – totaling 1/2 inch from each measure.
This means that the overall size of the blinds will be 47.5”W x 47.5”H.
Can roller blinds be longer than window?
Yes, roller blinds can be longer than the window. It is possible to buy roller blinds that are made to a certain length, or you can have them custom-made to fit any length window. If you are looking to buy roller blinds that are longer than your window, you should ensure that you measure the area that you would like the blinds to cover, such as the window plus any windowsill or frame area, to ensure that you get the right size.
It is best to have the blinds a few inches longer than the area you are covering to allow enough room to install the blinds and ensure they fit properly.
How do you measure blinds for recess?
Measuring for recess fit blinds requires slightly more steps than for a blind that fits inside the window frame. To measure for recess fit blinds:
1. Measure from the top of the recess to the bottom.
2. Measure the width across the top of the recess.
3. Measure from the left side of the recess to the right side.
4. Measure the width across the bottom of the recess.
5. Consider any obstructions inside the recess such as window handles, window winders and window cranks. These should all be taken into account when selecting the right product size.
6. For vertical blinds, measure the drop of the recess as this will be the length of the product.
7. For Venetian blinds or rollers, measure the width of the recess.
By taking all of the measurements, you should be able to easily select the right size blinds for your recess. If the measurements of the product you select differ slightly to those of the recess, don’t worry – a small difference of a few millimetres will not be noticable.