To spread lime with a Scotts spreader, you will need to have the correct type of spreader for the job. Scotts offers a few different versions, including a handheld broadcast spreader, a tow-behind broadcast spreader, an easy-to-use drop spreader, and the AccuGreen 3,000 drop spreader.
Before you begin, make sure your spreader is calibrated to the correct setting for the product you are using, as each product has a different setting recommendation.
Start by filling your spreader with the lime, ensuring that the product is evenly distributed and not evenly placed in one area of the spreader. Begin spreading the lime around your property with overlapping rows or circles, depending on your spreader type and the spread pattern of your lime fertilizer.
Make sure to avoid overlapping layers too close together or you may have uneven coverage. After you have spread the lime, use a rake or other hand tool to work the product into the soil.
Be sure to clean your spreader regularly to avoid clogs or issues with the spreader not working correctly. Additionally, check the manual for your spreader for any maintenance or care instructions to make sure your spreader is always in tip-top shape.
What number do I set my Scotts broadcast spreader to?
The proper setting for your Scotts broadcast spreader depends on the particular product that you are spreading. The Scotts website provides a link in the product instructions to an online settings guide, or you can find the settings on the Scotts product label or instruction booklet.
When setting your spreader, it’s important to adjust the dial to the proper rate of application. If the setting is too low, then you may need to apply more material to achieve the desired results. If the setting is too high, you may waste valuable product by over-applying.
When in doubt, it’s best to start on the low end of the setting and make adjustments as needed. It’s also important to always refer to the product label to make sure that you are applying the correct amount of product.
What setting should I put my spreader on?
The setting of your spreader will depend on the type of lawn and the type of seed you are using. For example, if you are spreading a grass seed in a sunny area, you should set the spreader to a medium-high setting.
If you are spreading a shade type grass seed in a shady area, you should set the spreader to a low or medium setting. Additionally, if you are using a drop spreader, you should set the flow control to a higher setting, so that enough seed is released.
If you are using a rotary spreader, you should adjust the setting by looking at where the seed is being spread. If the spreader is not covering the desired area, adjust the flow control to a higher setting.
Finally, make sure to check the manufacturer’s instructions to determine the best setting for the specific seed you are using.
What setting should Scotts spreader grass be set at?
To determine the optimal setting for your Scotts spreader, you should first refer to the product label for specific instructions. Generally, the spreader should be set between 1 and 5 depending on the type of seed, weed, or fertilizer being applied.
Thicker grasses and weed killers should be spread at a lower setting (1 to 3) while lighter weight grass such as fescue should be spread at a higher setting (3 to 5). Once you’ve determined the appropriate setting, adjust the spreader by turning the rate knob until the setting matches what’s recommended on the product label.
What do the spreader settings mean?
The spreader settings refer to what angle and width the spreader should be set to in order to distribute material such as fertilizer, seeds, pest control, and other material more effectively. Depending on the type of material being spread, the angle and width of the spreader can be adjusted to give different coverage patterns and rates.
For example, a wider spread means the material will be spread over a larger area, while a narrower spread will give a more focused distribution of the material. Additionally, the angle the spreader is set at will dictate how much material is distributed over a given area.
A higher angle will give more coverage, while a lower angle will deliver less coverage.
In order to make sure that material is adequately and evenly spread, it’s important to pay attention to the spreader settings and to adjust them as needed to suit the situation.
What do numbers on drop spreader mean?
The numbers on a drop spreader refer to the settings of the spreader. They indicate how much material – like fertilizer, seed, lime, or ice melt – is being distributed per 1,000 square feet of area. For example, a setting of 12.
5 means that 12.5 pounds of material is being spread per 1,000 square feet of area. When adjusting the spreader settings, it is important to check the recommended application rate according to the type of material you are using and adjust the settings accordingly.
It is also important to adjust the settings to take into account the speed at which you are walking and the width of the swath of material that the spreader creates. By using the proper settings, you can ensure you are applying the material in the correct amount.
How do you spread spreader with fertilizer?
To spread fertilizer with a spreader, you’ll first want to choose the type of spreader that is best for your specific application. For small gardens and yards, a handheld drop spreader is often a great choice.
These smaller spreaders are easy to use, carry and store. Larger yards may require a larger push or tow-style spreader to cover the area more quickly. Once the spreader is chosen, you’ll want to make sure it is filled with the product you’re looking to spread.
Then, follow the product label directions for fertilizer spreader settings to set your spreader to the right setting for the fertilizer product you’re using. Then, calculate the spreader setting if you don’t have the directions.
To do this, divide the amount of fertilizer in pounds to be applied by your area size in square feet. You should always double check with your fertilizer manufacturer to make sure you’re using the right spreader setting for their product.
Finally, you’ll want to begin spreading the fertilizer in a consistent back and forth motion, making sure to overlap your rows to ensure the entire area gets covered evenly. While you spread, keep your eyes on the spread rate monitor (usually a red disc) on the spreader to make sure you’re setting the correct spread rate.
When you’ve finished, shut off the spreader, clean it and store it for later use.
How do I fertilize my lawn with a hand spreader?
Fertilizing your lawn with a hand spreader is an easy and effective way to get a lush, healthy lawn. Before you start, you should check your soil pH, as this will indicate which fertilizer you should use.
Once you’ve chosen the right fertilizer, find an area with a flat, open surface, preferably on a dry day. Start on one side of the yard and work your way across, pushing the spreader 18 to 24 inches forward and then overlapping the swath by half.
Make sure to keep track of how much fertilizer you’re using, and stop if you’ve reached the recommended amount. After application, water the lawn lightly, and you should see results within a week or two.
How do you determine spreader settings?
Determining spreader settings is a process best done step-by-step to ensure accuracy. The first step is to identify the type of material being spread. This will help you determine the appropriate rate and spread pattern.
Once you have that information, you can use the spreader’s onboard computers, adjustable flow control gates, and rotary spreader distributor plates to accurately calibrate the spreader for the specific job.
Also, you may need to adjust the spreader’s width to ensure coverage, especially when spreading in areas with uneven terrain. Once everything is set, you should perform a test run in a nearby area to ensure accuracy before proceeding.
When fertilizing, another important step is to check for any obstructions or delicate plantings that could be damaged by the spreader. Finally, ensure that you are aware of the spreader’s local and state regulations, as improper usage can lead to fines or other consequences.
How much should a spreader overlap?
The amount a spreader should overlap depends on the material being spread, the type of spreader being used, the desired coverage, and the speed of the spreader. Generally speaking, for basic lawn fertilizers, the spreader should overlap by 25-50% of the spreader’s swath width.
This ensures uniform coverage and prevents duplication of effort.
When using a broadcast spreader, the overlap should be increased to around 75-100%. This helps reduce the chances of missing spots, and ensures a more even coverage throughout the area. For liquid chemicals and seed, the overlap should be kept at around 25-50%, as larger overlaps may result in the material becoming watered down or it could get too thick in certain areas.
When using a drop spreader, the amount of overlap depends on the desired coverage. Generally, a 10-25% overlap is recommended when using a drop spreader. This is because drop spreaders deposit material directly onto the ground, and a smaller overlap prevents the material from clumping up in certain spots and prevents from oversaturating the area.
If properly followed, a spreader’s overlap can provide uniform material coverage and reduce wasted product.
When should I apply fall fertilizer?
Fall is an important time for fertilizing your lawn as the nutrients help promote healthy turf-grass for the following year. It is recommended to apply fertilizer to your lawn around late August or early September.
This is because cool-season grasses such as Fescue and Ryegrass will start growing more actively at night temperatures fall below 65 degrees Fahrenheit. If the grass is still actively growing (above 65 degrees Fahrenheit), then you should wait to fertilize until temperatures begin to drop.
When fertilizing your lawn in the fall, make sure to choose a slow-release fertilizer with a higher phosphorus content and a lower nitrogen content. The phosphorus will help the lawn become more resistant to cold temperatures once winter sets in.
When applying the fertilizer, you should spread it evenly over your lawn. Most fall lawn fertilizers require from two to four applications per year but always read the instructions on the label for your specific fertilizer.
Following this schedule will help your lawn develop a strong and healthy root system for the upcoming growing season.
Is it too late to fertilize your lawn in November?
No, it’s not too late to fertilize your lawn in November. In fact, it’s actually a great time to apply a winter fertilizer to your lawn. Applying a fertilizer in November helps your grass stay healthy and fight weeds over the winter.
It also strengthens plants’ root systems so that when spring arrives, your lawn isn’t lacking in important nutrients.
When applying fertilizer in the fall, look for a product specifically designed for winter fertilizing. Make sure to follow the instructions on the label for when and how to apply the fertilizer. Also, rake up any leaves or debris from your lawn before applying the fertilizer so that it can seep into the soil more efficiently.
After you spread the fertilizer, water your lawn to help the nutrients get absorbed into the soil. Doing this will help ensure a healthy, lush lawn when the warmer weather of Spring arrives.
What is the lawn fertilizer to use in the fall?
The best lawn fertilizer to use in the fall is a slow-release fertilizer that helps establish root strength and provides proper nutrition throughout the winter months. Slow-release fertilizers break down over several weeks and provide a consistently available nutrient supply without having to reapply the fertilizer after every rain or snow event.
It is important to select a fertilizer specifically designed for use in the fall, such as Fall Fertilizer, to provide the essential nutrients for your lawn so it can survive the cold winter months. A typical Fall Fertilizer combines Nitrogen with Potassium and Phosphorus to promote strong root growth before winter sets in.
This type of fertilizer should be applied twice throughout the fall; once in late September or early October and again in late October or early November. Make sure to water your lawn frequently prior to and after the application of the fertilizer to ensure optimal absorption and effectiveness.
What happens if you apply fertilizer to wet grass?
If you apply fertilizer to wet grass, it can lead to an uneven distribution of fertilizer, resulting in a patchy, discolored lawn. Additionally, it can also cause fertilizer to be wasted as some of the particles will be washed away before they have a chance to be absorbed.
Not only that, but applying a fertilizer to wet grass can damage the grass blades, and can increase the risk of fertilizer burn, where the grass can become yellow or brown as a result of the high concentration of fertilizer in one area.
Due to the danger of fertilizer burn, it can also cause stress and damage to the root systems of your grass. Therefore it is important to avoid applying fertilizer when the grass is wet.
Which is better a broadcast spreader or a drop spreader?
It really depends on your individual needs. Both broadcast spreaders and drop spreaders have their own benefits and disadvantages.
Broadcast spreaders are ideal for spreading bulkier materials like fertilizers, seed, and ice melt. They are also a great choice for large areas. They spread material to the left and right and evenly distribute material over a wide area.
The disadvantage of broadcast spreaders is that you can’t always accurately control where material is distributed and you could end up with too much material in one area.
Drop spreaders on the other hand are best for materials that are finer, such as grass seed and sand. Thanks to the design of the spreader, whether it is pneumatic, mechanical, or manual, you can more accurately control the material deployment so you don’t end up with too much in any one area.
The disadvantage of a drop spreader is that it’s slower because it doesn’t spread material evenly over a wide area like broadcast spreaders.
Ultimately, which is better for you depends on your particular needs. Consider the size of the area you need to spread material on and the type of material you are spreading before you decide which type of spreader to buy.