Trimming a tree with a pole saw can be a daunting task that takes a good amount of patience and skill. However, it can be accomplished relatively easily with the right tools and a few tips.
The first step should involve gathering all of the necessary items to complete the job. These include: pruning shears, a pole saw (or sawzall, depending on the size and condition of the tree), protective gloves, and safety glasses.
Once all of the supplies are obtained, the next step is to inspect the tree. Check the tree for any dead branches and/or any limbs that are overhanging. Trim any branches that have been damaged or have grown to a length that is too long.
Next, it’s time to get to work with the pole saw. Start by standing on a ladder or stable platform, and making sure the saw blade is securely attached and operational. Place the blade of the saw directly where you are going to be making the cut.
Pull the trigger, similar to using a chainsaw, to start the saw. Slowly and steadily, move the saw from the top to the bottom of the tree, making sure that it is making a clean cut for each branch. If a branch becomes tangled in the saw, use the pruning shears to cut it free.
After each cut, double check the trunk of the tree for any damage or remaining deadwood. Once the tree has been trimmed and the branches have been cleared, carefully turn off the saw and lower it to the ground.
With a steady hand and a few necessary tools, trimming a tree with a pole saw is an achievable task that can help to keep a tree healthy and well-maintained.
Are pole saws hard to use?
No, pole saws are generally not difficult to use. They are designed to be lightweight and easy to operate. To use a pole saw, you simply need to extend the tool to the desired length and secure it via the pole’s locking mechanism.
Then insert the blade into the branch you want to cut and start cutting. Some pole saws also come with a chainsaw to help you make more precision cuts. With a little practice, it’s easy to use a pole saw to cut branches or limbs safely and accurately.
What is the difference between a pole pruner and a pole saw?
A pole pruner and a pole saw are both types of tools that are used to trim tree branches. The primary difference between them is the type of blade they use. A pole pruner has a curved blade, often referred to as a “pruning blade,” which is designed to cut through branches smoothly and quickly.
This makes it ideal for trimming smaller branches and for a finer, detailed cut. A pole saw, on the other hand, has a large, angled blade that is designed to make a sawing motion, which is useful for making rough cuts on thicker branches.
A pole saw offers a much more aggressive cut than a pole pruner and it can reach much higher branches. Another difference between a pole pruner and saw is that pole pruners typically have an adjustable cutting head, so you can set the angle to make a precise cut.
Pole saws, however, must be manually adjusted in order to change the cutting angle.
How thick of wood can a pole saw cut?
A pole saw is designed to cut through wood up to a maximum of 8 inches thick. It is possible to cut through thicker sections of wood, however it may require more time, strength, and effort. When cutting thicker wood, it is important to choose the proper saw blade, use sharp blades, and properly maintain the saw after each use.
Additionally, it is important to work safely and make sure the material is adequately secured. The length of the pole saw and the size of the blade also influence how thick of wood it can cut. Generally, a pole saw can be used to efficiently cut branches up to 5 or 6 inches thick.
However, when the poles and the blades are longer and bear a larger capacity, it can handle thicker pieces of wood.
Why is my pole saw not cutting?
If your pole saw is not cutting, there are several potential causes to explore. First, check the chain tension and ensure it is properly adjusted and lubricated. If the tension is too tight, it can affect the cutting power of your saw.
Additionally, make sure your bar oil reservoir is full and that the flow of oil is consistent. If the pole saw is electric, check the power cord to see if it is properly connected, and be sure that the electric motor is receiving the sufficient amount of power for cutting.
If it is a gas pole saw, check the fuel tank to ensure the saw has enough gasoline, the air filter is in place and unclogged, and the spark plug is connected and in good condition. If all of these conditions are met and the saw is still not cutting, then you may need to take it in for repair.
Can a pole saw be used as a chainsaw?
No, a pole saw cannot be used as a chainsaw. A pole saw is designed to reach into high or hard-to-reach places, while a chainsaw is designed to cut branches and logs with a faster and more efficient motion.
While a pole saw can be used to do some of the same tasks as a chainsaw, it is not suitable for heavier cutting jobs and is not as powerful. A pole saw usually has a longer handle for more reach and less cumbersome maneuvering, and a much smaller motor with fewer blades compared to a chainsaw.
Additionally, a pole saw has a significantly smaller bar and chain, which makes it suitable for up to 5” diameter branches and trunks. If the job requires heavier cutting, it is recommended to use a chainsaw for the job.
Can I use pole saw to trim bushes?
Yes, you can absolutely use a pole saw to trim bushes. Pole saws are an incredibly useful tool when it comes to landscaping, and the reach and maneuverability of the long handled saw make it especially well-suited to detailed trimming of bushes and shrubs.
When using a pole saw, be sure to use safety equipment like a hard hat and safety glasses. Make sure the chain is oiled and sharpened before you get started, and hold the saw firmly in both hands as you make your cuts.
Finally, be conscious of how far you’re reaching, and avoid putting too much strain on your back and arms.
Is a pole saw worth it?
In general, a pole saw can be a very useful and cost-effective tool, especially for people who find it difficult or dangerous to use a ladder in order to trim trees and shrubs. Depending on the size of the job, a pole saw can be a worthwhile investment that will save time, energy and effort.
For larger jobs, a pole saw can save you time and money because you don’t have to buy a ladder for each job. Pole saws also tend to be safer than ladders since you don’t have to worry about maintaining a precarious balance on a ladder.
Additionally, a pole saw may be more cost-effective than renting a professional tree-trimming service in the long-term. If you have large bushes and trees that need to be trimmed on a regular basis, a pole saw can be a great investment and help you save money over time.
Finally, pole saws tend to offer a greater reach than hand pruners, especially in areas that are hard to reach. This means that you can easily trim trees that are situated in out of the way places or at heights that are too high to reach with a ladder.
Overall, a pole saw can be a very cost-effective and useful tool in most situations where a ladder is either impractical or dangerous. Whether it’s worth investing in one depends on the size and regularity of pruning jobs.
What are pole saws good for?
Pole saws are great tools that make it easier to trim and prune tall trees, hedges and shrubs without having to stand on a ladder or use a different ladder attachment. Unlike a traditional saw blade, pole saws use a short saw blade that extends from the end of a long pole.
This gives the user the ability to reach high branches with out the need to climb. The long pole also allows for more accuracy and control when pruning and trimming, especially in more challenging environments like a garden or landscape with a lot of plants and trees.
Pole saws are also much safer to use than a full-sized saw since they are shorter and easier to control. The lightweight design also makes them easy to handle for extended periods of time. In addition to being great for pruning, pole saws can also be used to clear overgrown areas of a garden, trim away dead branches and limbs, and even slice through small logs or branches for campfires or other uses.