Turning on a dead iPhone may seem like a difficult task but it is actually very straightforward. First, make sure that you have a working charger and that it is plugged into a wall socket. Try connecting the charger to your iPhone.
You may notice the iPhone’s display will light up with an Apple logo, indicating that the iPhone is powering back on. If the iPhone does not respond to the charger, try pressing the power button for a few seconds.
This may kickstart the process and the iPhone should power back on as usual. If these methods do not work, you may need to reset your iPhone by pressing the “home” and “power” buttons for about 10 seconds, or until the Apple logo appears.
Once the logo appears, you will be taken to the home screen and the reset process should be complete.
What causes iPhone Black Screen of Death?
The iPhone Black Screen of Death (BSOD) is a phenomenon which occurs when the user’s iPhone screen suddenly turns an all-encompassing black color and seems to be totally unresponsive. There can be several causes for the Black Screen of Death.
The most common causes are related to software issues, such as an iPhone being jailbroken or attempting to install an incompatible OS update. The iPhone BSOD can also result from hardware malfunctions, such as a failing display or logic board, or a physically damaged display.
It is important to note that the iPhone Black Screen of Death is sometimes the result of a problem with the operating system, not the hardware. In these cases, the user can use recovery mode to restore the iPhone and hopefully fix the issue.
Another potential cause of the iPhone Black Screen of Death is a failing battery or, in the worst-case scenario, a dead battery. If an iPhone’s battery dies completely, for any reason, the phone will turn off and display a black screen.
If the battery is not completely dead, the user can sometimes still revive their device by connecting it to a power source and allowing it to charge. In some instances, the battery may be able to hold just enough power to restore the device to its factory settings, allowing the user to start fresh with a reusable iPhone.
Why is my iPhone completely dead and wont charge?
There could be several reasons why your iPhone is completely dead and won’t charge. First, it’s possible that the battery may have completely worn out. With time and use, the battery in an iPhone can become worn and run out of charge much faster than normal.
It’s recommended to replace the battery every couple of years to ensure optimal performance.
Second, it is possible that your iPhone’s charging port may be damaged. When dirt, lint, and debris accumulate in the charging port it can cause the connection between the iPhone and the charging cable to be compromised.
If this is the case, the port may need to be cleaned out to ensure that optimum connection is restored.
Finally, it is possible that the charging cable or wall adapter is faulty. Check the USB cable and wall adapter for any signs of damage. If either of these components are damaged, it can prevent your iPhone from charging properly.
Replace any faulty charging accessories to see if this resolves your issue.
Why isn’t my phone turning on after it died?
If your phone isn’t turning on after it died, it could be due to a number of factors. It is possible that your battery died but the phone is not charging correctly due to a defective cable or charger, a faulty battery, or a broken port.
It could also be possible that the battery drained low enough for the phone to shut off, but the device is not receiving power because the charging power source is not providing the correct voltage. Additionally, a failing battery or hardware component could be the cause of the phone not powering on.
Other possibilities may include water/liquid damage to the device, a cracked or shorted battery, a damaged power button, or a defective mainboard.
It is recommended to first ensure that the charger and cable are working properly before addressing other possibilities. Check your charger’s voltage with a multimeter and make sure it matches the voltage listed on the charger.
If the charger is working properly, then try another charger of the same voltage and see if the phone will power on. If the phone still isn’t turning on, try replacing the battery. If the phone still won’t turn on, you should take it to a local repair shop for further diagnosis and repairs.
How do you know if your phone battery is damaged?
If your phone battery is damaged, there are several signs that you can look out for. One common sign is that your battery may start to overheat, or it may become hot even when it is not in use. Additionally, you may notice that your phone does not stay charged for very long or it takes longer to charge than it used to.
If these signs are present, then it may be a sign that your phone battery is damaged and you may need to replace it. It is also a good idea to check for any visible signs of physical damage on the battery, such as cracks or bulging.
If you are unable to check for any visible damage, then try to disconnect and reconnect the battery, as this may fix the issue. Finally, it is important to make sure that you use only compatible charging accessories as some third-party chargers may be incompatible and cause your battery to malfunction.
Why is my phone screen black and won’t turn on?
In some cases, the issue could be that your phone is running out of battery power. If this is the case, simply plugging it in to a power source should resolve the issue.
Another possibility is that the LCD display of your phone itself is broken. This could be caused by a drop or water damage. In that case, you would need to have the phone serviced in order to have the LCD display replaced.
Yet another possibility is a more complex one, involving the phone’s software or hardware. In this case, you would have to have the phone inspected and repaired by a technician. They can help you diagnose and fix any underlying issue that has caused your phone screen to be black and unresponsive.
How long does it take to charge a dead iPhone to turn on?
It depends on the model of iPhone you have, the type of charger you are using, and the condition of the battery. Generally speaking, it can take anywhere from an hour to two hours or even more to charge a dead iPhone to turn on.
The amount of time needed to charge an iPhone varies depending on the battery’s current state of charge. For instance, if your iPhone battery has been completely drained, it can take longer to charge than if it was in a partially charged state.
Additionally, different iPhone models may require different amounts of time to fully charge. Using a wall charger with a higher amperage than the one that came with the iPhone will also result in faster charging times.
Can an iPhone battery go completely dead?
Yes, an iPhone battery can go completely dead. If your phone’s battery runs all the way down, it is called “deep discharging. ” Deep discharging can cause permanent damage to lithium-ion batteries and should be avoided.
To prevent deep discharging, try to keep your battery charge above 20% at all times. You can also keep track of your battery level by accessing the Battery section in the settings menu, or by using an app like Battery Monitor.
It is important to note that over time, even if you take the proper precautions, an iPhone battery will start to wear down and not last as long. After a few years, you may find that you need to replace your battery for your phone to function properly.
Apple offers battery replacement services, or you can take your phone to a local repair shop for assistance.
What happens if iPhone won’t turn on?
If your iPhone won’t turn on, there are several possible causes and solutions. The simplest cause might be a drained battery, so try connecting your device to a power source and charging it for at least an hour before attempting to turn it on.
If your iPhone won’t turn on even after charging, the issue may be something else, such as a corrupted software, damaged hardware, or something else. In this case, you may need to perform a force restart by pressing and holding the power button and either the volume down button or the home button (depending on the model of your iPhone) for 10 seconds, until the Apple logo appears.
If the force restart doesn’t work either, the problem may be more serious, and you may need to contact Apple or take it to an Apple Store for further assistance. In some cases, a defective or out of date device may also fail to respond and need to be fixed or replaced.
Why does iPhone take so long to charge after dying?
When an iPhone’s battery is completely drained and needs to be recharged, it takes longer than usual to charge. This is due to the fact that at this point the battery is considered ‘deeply discharged’, meaning that its cells have been emptied out and can no longer efficiently accept charge.
To ensure a safe and efficient recharge of the battery, it is necessary for the phone to slowly build up the charge again, as pumping a full charge into the battery all at once may be too much for the battery to handle and could potentially lead to damage of the battery and/or increased wear and tear.
Therefore Apple and other manufacturers use a system of ‘”charge finishing” algorithms’ that allow the phone to slowly bring the battery up to a full charge, resulting in a slower but much safer charging process.
They also place a limit on the maximum charging current, meaning that when it reaches that level the voltage will start to decrease again and the system will slowly reduce the current being fed into the battery until a full charge is reached.
In addition, the battery being drained (while not recommended) can cause increased wear and tear over time, resulting in an aging of the battery and reduced capacity to charge quickly and efficiently.
Overall, these processes and algorithms are in place to ensure a safe charging experience, but can take extra time when recharging an iPhone with a completely drained battery.
How can I get my dead phone to work again?
It is possible to revive a dead phone depending on the cause of it not working. If the cause was a software issue, then disabling any conflicting apps and restoring your phone to it’s original state could be a potential fix.
This can be done by doing a factory reset on your device. Typically, this option can be found in the settings app and you will be asked to confirm whether you want to restart or reset your device. Additionally, any system updates can be useful in reviving your device.
If the problem was caused by a physical issue, you can try restarting your device by disconnecting the battery and then reconnecting it to the device, or if it is detachable, leave it out for a few minutes, and then replacing it in the device.
It is also advisable to take your phone to a professional to diagnose it, and potentially fix the issue. This may be a more expensive option, but it can potentially solve the issue and help you bring your device back to its previous working condition.