Washing a faux fur blanket at home is fairly easy, but you will want to make sure you do it correctly to avoid damaging the material. Here are some steps to help you:
1. Start by reading the care instructions that came with your blanket. This will help you determine whether or not your blanket is machine washable. If it is not, you will need to take it to a professional cleaner.
2. If the blanket is machine washable, you’ll want to use a mild detergent and lukewarm water. Avoid using products with bleach or other harsh chemicals.
3. Place the blanket in a large tub or bathtub, and fill it with enough water to cover the blanket.
4. Add the detergent, and agitate the water to distribute it evenly.
5. Submerge the blanket in the water and allow it to soak for at least 20 minutes.
6. Drain the tub, and then refill it with fresh, cold water.
7. Carefully rinse the blanket in the cold water to remove any soap residue.
8. Drain the tub one more time, and then gently squeeze the blanket to remove excess water. Do not wring it.
9. Spread the blanket on a clean, dry towel to dry. You may also choose to tumble dry it on the lowest heat setting.
10. Once the blanket is completely dry, brush any mats out of the fur with a wide-tooth comb.
By following these steps, you should be able to safely and effectively washing your faux fur blanket at home. Be sure to always read the care instructions before washing.
Can you put a faux fur blanket in the washing machine?
Yes, you can put a faux fur blanket in the washing machine. It is important to use a delicate or gentle cycle, as well as a mild detergent that is specifically designed for washing synthetic materials.
Also, turn the blanket inside out before washing in order to protect the fur from getting rubbed and matted. Lastly, avoid using fabric softener since it can make the Fur clump together. When finished, be sure to air dry the blanket, as drying it in the dryer can cause the Fur to shrink, mat, or even come off.
How do you clean faux fur without ruining it?
Cleaning faux fur without ruining it requires a gentle touch. The best way to clean it is with a gentle detergent or shampoo, such as a pet shampoo. Fill a basin or bathtub with lukewarm water and add a tablespoon or two of the detergent.
Swirl the water gently to dissolve the detergent, then add the faux fur. Let the fur sit for about 10 minutes, and then gently swish it up and down in the solution. Once the fur has been soaked for about 10 minutes, drain the basin and rinse the fur thoroughly with cool, clean water.
To dry the fur, lay it on a towel. Place another towel over the faux fur, then gently press down to absorb as much moisture as possible. Finally, lay the faux fur on a mesh or mesh-like drying rack and leave it in a well-ventilated area to dry.
How do I make my faux fur fluffy again?
Making your faux fur fluffy again is a relatively straightforward process. Begin by lightly brushing the fur with a soft-bristled brush (pet brushes work great). After brushing the fur, use a low heat blow dryer to blow the faux fur fibers expanding them and giving them back their fluffy appearance.
Keep the blow dryer at least 6 inches away from the faux fur and move it around continuously so the entire piece of fur gets equal attention. Don’t forget to repeat the brushing and blow drying motion one more time to maximize results.
Once the faux fur is fluffy and pristine again, store it in a garment bag or dust cover to ensure it stays fluffy and dust-free.
Can you tumble dry a faux fur throw?
No, you should not tumble dry a faux fur throw as it can be damaged during the process. Heat can cause the fabric of the throw to become brittle and the faux fur to lose its texture. In addition, the faux fur may become knotted or matted.
To keep your faux fur throw looking its best, it is recommended that you air dry it. Hang the throw on a clothesline or drying rack, away from any direct heat. Allow the throw to air dry until it is completely dry.
When the throw is dry, you may wish to brush it out with a wide-toothed comb to help keep it looking soft and fluffy.
Can you wash a faux fur comforter?
Yes, you can wash a faux fur comforter in a washing machine using the gentle cycle and cold water. When putting the comforter in the washing machine, make sure to use a large enough load size bag to avoid any accidental rips.
After the comforter has finished the cycle, dry the comforter on a low heat. While the comforter is still in the washing machine, it is important to avoid agitating it too much and to check it periodically to make sure there is no damage or excess wear on the comforter.
After the comforter has been taken out of the washing machine, hang it up and allow it to air dry. This will help to preserve the comforter and its faux fur material, so it will last longer.
How do you fix a crunchy blanket?
The most common way is to wash the blanket in hot water with a good detergent and a fabric softener. For extra softening, you can soak the blanket in a solution of 1 part white vinegar to 4 parts water for at least 30 minutes before washing.
After washing, dry the blanket in the dryer with a few dryer balls or a folded towel. This will fluff up and soften the blanket. If the blanket is still somewhat crunchy, you can try to spray it with a fabric refresher spray, like Febreze.
Lastly, you can use a steam iron on the blanket. This will help to fluff and smooth the fabric out, helping to make the blanket feel softer.
Can you use fabric softener on faux fur?
No, you should not use fabric softener on faux fur, as it can cause color fading, weakening of the fibers and even clumping of the fur. The synthetic fibers that make up faux fur can be weakened by the oils and chemicals found in fabric softener, which can lead to temporary or permanent damage.
Instead, faux fur should be washed with a mild detergent in a delicate cycle and not left to soak for long periods of time. If the faux fur needs to be softened, it is best to use a special faux fur comb or brush to fluff it up.
How can I bring my fake fur back to life?
Reviving fake fur can be done naturally, without the use of harsh chemicals or treatments. Here are some tips that can help bring your fake fur back to life:
1. Start by combing through the fur with a large-toothed metal comb. This will help to remove debris and knots.
2. Place the fur on a flat surface and rub it gently, using circular motions with your hands. This will help bring the fur back to its original texture.
3. Use a hair dryer to help fluff up the fur. Hold the dryer on medium heat and move it around the fabric, keeping it at least a few inches away from the fur so as not to cause any damage.
4. Spritz the fur with a fabric refresher or a mixture of equal parts water and cider vinegar. This will help to deodorize and add moisture back into the fabric.
5. As a final step, use a steamer to help bring the fabric back to life. Hold the steamer a few inches above the fur and keep the heat on low. This will help to soften the fabric and make it look like new.
By following these simple steps, your fake fur will look and feel refreshed and revitalized!