When installing indirect lighting, the fixture should be placed around 6-7 feet from the ceiling. This will ensure the light is distributed properly throughout the room and will create a pleasant atmosphere.
It is important to keep in mind that the overall brightness of the fixture and the size of the area should also be taken into consideration. Additionally, the type of bulbs or light sources used can affect the distance of the light fixture from the ceiling.
For instance, indirect lighting fixtures that incorporate LEDs should be placed closer to the ceiling in order to gain the most efficiency out of the lights. On the other hand, fluorescent lights or halogen lights should be placed a little further away to prevent any unwanted glare or intense illumination.
How far down does Crown Moulding go?
The height of the crown moulding is based on personal preference, but generally it is placed so that it begins at the top of a wall and goes about a third of the way down the wall. For example, if the wall is 8 feet in height, the moulding would begin at the top and go all the way down to approximately 2.
6 feet from the floor. It is also common for crown moulding to terminate onto the baseboard trim. This means that the crown moulding runs up to the baseboard trim but does not overlap it. The height at which the crown moulding should stop depends on the size of the baseboard trim and personal preference.
For a more traditional look, the crown moulding can start higher up the wall, although this is up to the preference of the homeowner.
How do you do crown molding with LED lights?
Installing LED lights in crown molding is a great way to add a unique, beautiful and practical light source to any room in your home. LED lights have many advantages, including low energy usage and long life.
Crown molding is a decorative trim used to finish off the top of walls and room interiors, typically made of wood or plastic and painted to match the room. The two can be combined to create a dramatic, illuminated room focal point.
Installing LED lights with crown molding can be achieved in several steps. First, measure the room where the crown molding will be installed to get the proper length, angle, and type. Ensure that it’s the right size, shape and color for the space.
Next, you must decide if you will install the crown molding and LED lights alone, or if you will hire a professional.
Once the crown molding is purchased and installed, the next step is to attach all the necessary components for the LED light installation, such as control switches, dimmer control units, junction boxes, and wire harnesses.
When all the components are in place, the LED lighting can be installed. Many people opt for string lights connected to the underside of the crown molding for easy installation. Be sure to secure all wiring and wiring components, as well as test the system before making it live.
Finally, after the installation is complete, enjoy your beautiful crown molding with LED lights!
How do you hide LED lights on crown molding?
Hiding LED lights on crown molding can be accomplished in several ways. The primary consideration is to make sure that the lighting does not overpower the molding, but instead highlights the intricate details.
One of the easiest ways to hide LED lights in crown molding is to simply put them into the middle of the room, like you would with traditional lighting. This will provide a subtle downlighting effect without overpowering the molding.
An alternative to this method is to install the LED lights along the wall, using recessed fixtures or mounted fixtures that blend in with your molding. This keeps the lighting hidden from view, while still providing a bright light that emphasizes the elegant details of the molding.
Additionally, you can use LED strips when installing LED lights in the crown molding, as this is much easier than wiring traditional lighting. LED strips can be cut to size and are unobtrusive, allowing the molding to take center stage.
Do you put LED lights on the ceiling or wall?
It really depends on the look you’re going for and what is practical for the space. LED lights can be installed in a variety of locations such as ceilings, walls, and furniture. Ceiling lights tend to provide maximum illumination, so if that is the goal, it is best to install LED ceiling lights.
LED walls lights are great for serving as an accent light to make certain areas more aesthetically pleasing, and they can help define a room. If you would like a dimmer lighting, then you can install LED lights under furniture or behind areas such as bookshelves to provide task lighting.
Additionally, LED lights can be installed in the window sills to allow natural light while still providing dimmable lighting when needed. Ultimately, the decision of where to put LED lights depends on your needs and preferences.
Can you cover strip lights?
Yes, strip lights can be covered. Covering strip lights can reduce the amount of glare and light pollution in a room, making it more comfortable for people to work and relax. Such as fabric covers, paper shades, and custom-made shielding.
Thick fabric is recommended as it will generally diffuse the light while still keeping it bright. Installing a fabric cover usually requires the help of an electrician. To install a paper shade, measure the length and width of the light strip, and then purchase a pre-made shade of appropriate size, or buy paper and fabric to make custom shades.
To shield the strip light, an opaque material should be used and attached directly to the back of the strip light. However, shielding should be avoided when possible as it can significantly reduce the light levels.
What do you put behind crown molding?
When installing crown molding, you will typically want to put a flat piece of material between the wall and the molding. This gives a cushion for the crown molding and allows it to fit snugly against the wall.
Most commonly backing material used is a thin V-groove hardboard, which can be cut to size and easily installed behind the molding. In some cases, you may need to use a thin plywood or thin metal instead.
Additionally, once the backing material is installed, you will need to caulk around the molding to provide a tight seal and give it a finished look.
Is crown moulding modern?
Crown moulding is classic and timeless, but it can also be modern depending on the individual style and design. For example, contemporary or modern crown moulding typically features clean, sleek lines, while classic crown moulding usually has a more ornate, decorative design.
When choosing a modern style of crown moulding, it is best to choose materials with a reflective finish like chrome or stainless steel which can add shine and sparkle and give the room a modern, updated look.
Additionally, many modern crown moulding designs are available that are made from lightweight materials like foam and vinyl, which can give your space a distinctive modern appeal.
How do you fix a gap between ceiling and crown molding?
The best way to fix a gap between ceiling and crown molding is by caulking. First, ensure the area is clean, then apply painter’s tape above and below the gap to protect the ceiling and molding. Make sure the tape is aligned straight and securely pressed along the gap.
After the tape is securely in place, apply a smooth bead of paintable caulk to the gap between the ceiling and the crown molding. Make sure to leave some excess caulk on either side of the gap to help with molding adhesion.
Finally, use a damp cloth or sponge to smooth the bead of caulk along the gap. Once the caulk has had a chance to dry, carefully peel off the painter’s tape. Applying a new coat of paint can then be used to touch up the patched area.
Can you put crown molding on just one wall?
Yes, you can install crown molding on just one wall. However, the larger the area you’re covering, the more intricate the molding job, and the more challenging the installation. You’ll also want to make sure that the crown molding is appropriately proportioned to the size of the room – for example, larger rooms, such as living rooms and dining rooms, can support wider trim, whereas smaller rooms may have a proportionately narrow trim.
Additionally, installing crown molding on one wall of a room may provide an opportunity to create a dramatic effect with a complementary paint color or wallpaper, tie in the furnishings and fabrics, or express a personal style.
When installing crown molding on just one wall, there are several steps to consider:
1. Select the best grade of crown molding for the project at hand – ensure that the grade of the trim matches the grade of the doors and window casings in the room.
2. Measure the wall accurately and cut the molding to the right proportions.
3. Attach the molding to the wall with a few nails.
4. Caulk the seams and joints to create a smooth finish.
5. Apply paint or wallpaper.
With the right materials, tools, and techniques, you can achieve a stunning look by installing crown molding on just one wall. It’s important to take the time to properly measure and cut the trim to get a clean, professional-looking result.
Finally, don’t forget to step back and admire your hard work!.
Should crown molding touch the ceiling?
When installing crown molding, the general rule is that it should have a slight gap (around 1/8 of an inch) between the upper edge of the molding and the ceiling. This gap serves two purposes: aesthetic and practical.
Aesthetically, the gap adds more definition between the wall and ceiling, and emphasizes the dimensions of the room and molding. From a practical perspective, this gap will allow your molding to be installed more securely and adjust to any slight imperfections along the ceiling where you are installing them, such as unevenness along the length.
Overall, crown molding has a beautiful finished look when it meets or nearly touches the ceiling, though having the slight gap ensures that it looks great, is installed properly, and will stay secure for the long term.
Carefully measure and cut the molding to ensure that it fits in the small gap between the wall and ceiling. If a mistake is made, you can use putty or caulk to fill in small gaps and even out the joints.
Do modern homes use crown molding?
Yes, modern homes do use crown molding. Crown molding is a decorative feature that can add a touch of elegance to any type of home. It is also a great way to add interest and depth to the walls, and to finish off the ceiling and wall transition in a polished way.
It is also relatively inexpensive and can be found in a variety of materials and styles. Crown molding can be used to great effect in both contemporary and traditional homes, with modern homes often using cleaner, more minimal lines and simpler materials such as wood and steel, in order to achieve a minimalist, streamlined look.
Does crown molding increase resale value?
Yes, crown molding can increase the resale value of a home. Homebuyers often view crown molding as a luxurious upgrade to a home’s interior, especially when the moldings are well designed and flawlessly installed.
Crown molding can provide a distinctive style to walls, ceilings, and doorways that can help make a home appear even more attractive and upscale.
Crown molding is also known to reduce noise levels in a home, which can be beneficial to both current occupants and potential buyers. By absorbing much of the sound that comes from other rooms, crown molding can make a home feel more inviting to future buyers.
Crown molding is relatively affordable when considering the potential return on investment it can bring to a home. In many cases, real estate experts report that the value of the home can be increased by more than the cost of the materials and installation, making it a wise choice for homeowners who are focused on increasing their home’s resale value.
Is it OK to not have crown molding?
Yes, it’s perfectly OK to not have crown molding. It’s all a matter of personal preference and depends on the style of your home. Generally, all home styles can benefit from adding crown molding, as it adds an extra layer of design detail and character.
However, it’s by no means a requirement and there are lots of homes without any crown molding that look just as elegant and stylish. Ultimately, if you like the look of crown molding but don’t want it in your own home, that’s completely up to you.
Does crown molding have to match cabinets?
No, crown molding does not have to match cabinets. Crown molding is used to add an extra decorative touch to your cabinets and add visual interest to the room. You can choose to either match the cabinets with the molding or create contrast with an entirely different color or material.
If you are going for a more traditional and formal look, then matching your cabinets and crown molding would offer a more uniform look that would typically blend better with the other elements in the room.
If you are looking to make a bolder statement, then contrast between the cabinets and molding could achieve the desired look. Ultimately, it’s up to you and the vision you have for the space in order to determine which option best suits the overall design scheme.
What are contemporary cabinets?
Contemporary cabinets refer to cabinets that utilize a modern design aesthetic to blend form and function. Contemporary cabinets often feature simple, clean lines, minimal ornamentation and a focus on functionality.
In addition to their sleek, uncluttered look and straightforward construction, contemporary cabinets are designed with the latest technological advances, such as pullout shelves, lazy susans and soft close drawers.
Contemporary cabinets may be of any material, from wood, to laminate, to metal, and can be found in colors ranging from natural wood tones to vivid hues. Whether your style is more traditional or modern, contemporary cabinets can be tailored to match and enhance your décor.
How much does it cost to add crown molding to a room?
The cost of adding crown molding to a room will depend on a variety of factors, including the size of the room, the type of crown molding used, the difficulty of installation, and the cost of labour.
Generally, the price range for crown molding can range from as little as $1 per linear foot for more basic options with DIY installation, to $20 or more per linear foot for more intricate options with professional installation.
The cost of materials (such as the crown molding and finishing nails) also needs to be factored in. Depending on the size of the room, the total cost of materials and labour can add up to a few hundred dollars, or even more.
Does crown molding make a room look smaller?
Crown molding can make a room look more finished and elegant, but it is not necessarily a good choice if you’re looking to make the room appear bigger. It can make the ceiling seem lower, and the room appear smaller.
Light colors, such as white or a pale yellow, can help to create the illusion of a larger space by reflecting light around the room. Darker or brightly colored crown moldings tend to make the room look smaller.
If you’re looking to make the room look bigger, try simpler, more delicate molding, like dentil or beading, which is much less intrusive, and less likely to make the room look cramped. It can also help to incorporate lighter wall colors, as well as natural light.
Avoid heavy drapery, and use mirrors strategically to expand the look of the room.
Why is crown molding so expensive?
Crown molding can be quite expensive due to the cost of materials, craftsmanship, and installation. The materials used to make crown molding usually include wood, stone, plastics, and metals like aluminum.
These materials can all be expensive when purchased in large quantities. Additionally, molding may require specialized design, craftsmanship, and precision cuts which can add to the cost. Finally, installation itself may require considerable labor and equipment to properly fit the molding into place.
Therefore, all of these factors can lead to the high cost of crown molding.