The Genie GS 1930 is a scissor lift and it has a maximum platform height of 19 ft (5.79 m). This platform is capable of carrying up to 500 lbs (227 kg) of payload and features a 24 VDC power system. Additionally, the platform lifts 320 lbs (145 kg) with 23 seconds.
Finally, the platform extends up to 6.9 ft (2.10 m) with 40 seconds.
How much do scissor lifts weigh?
The average scissor lift weighs between 3,500 and 12,500 pounds, depending on the size and model. Smaller scissor lifts, such as those used in residential settings, tend to weigh between 3,500 and 8,000 pounds.
Larger commercial scissor lifts typically weigh between 8,000 and 12,500 pounds. A standard scissor lift averages approximately 6,000-7,000 pounds. The weight of the scissor lift should be considered when looking for a lift, as different lifts have different towing capacities.
Additionally, some scissor lifts may require extra safety precautions or special vehicles for transportation due to the increase in weight. It’s important to pay attention to the weight specifications of the scissor lift before making a purchase.
How hard is it to tip over a scissor lift?
It is not particularly hard to tip over a scissor lift, as long as certain precautions are taken. Anytime a scissor lift is in use, the operator should make sure it is properly stabilized and secure.
SomeTips for avoiding tipping include making sure the lift has outriggers, or stabilizing feet, attached securely and that the platform is full lowered to the ground.
It is important to use caution when using a scissor lift, as the likelihood of overturning increases quite significantly when the lift is raised even a few feet. The higher the platform is, the greater the forces of gravity and momentum become, and the more likely the lift is to tip over.
It is also important to operate the scissor lift safely. Driving and steering the lift too quickly, over uneven terrain, or over an incline can cause the lift to become unstable and potentially tip over.
Keeping the platform close to the ground, avoiding sudden turns, and driving at reasonable speeds can help to avoid tipping.
Finally, drivers should never stand, kneel, or bend over while on the platform and should always wear a restraining device, such as a seatbelt. This will ensure that the operator remains in the center of gravity in the event of a tipping incident and can help to prevent the lift from overturning or the operator from being ejected.
How much does a Skyjack 4632 weight?
The Skyjack 4632 scissor lift has an overall weight of 12,000 lbs (5,443 kg). It also has a maximum platform capacity of 3,000 lbs (1,361 kg) and has a maximum lift height of 32 ft (9.75 m). The Skyjack 4632 is a diesel powered scissor lift designed for heavier applications and working in environments where added stability is required.
Its stability is achieved by its non-marking, heavy-duty, rough terrain outriggers. Its sealed, combination-drive motor is both reliable and noise-reducing, which makes it an ideal choice for indoor and outdoor applications.
How tall is a 2632 scissor lift?
A 2632 scissor lift is approximately 8 feet 2 inches tall when fully extended. The platform height is approximately 28 feet with a maximum lift height of 39 feet when the lift is fully extended. This type of scissor lift is versatile and can be used for a variety of jobs.
It can lift up to 1,250 pounds and offers up to 39 feet of platform height. The lift can traverse 40 percent grade slopes and has a working outreach of up to 18 feet. It is suitable for multiple job sites including industrial, commercial, and residential settings.
Additionally, it is designed with operator comfort and safety in mind, featuring adjustable speed settings and a secure step ladder.
What is the highest a scissor lift can go?
The height of a scissor lift varies depending on the make and model, but most are capable of heights of up to 30 feet. Some specialty scissor lifts can extend as high as 60 feet. It is important to remember that the maximum reachable height will depend on the model of the scissor lift you purchase as well as the weight it is carrying and the ground conditions.
Be sure to research scissor lifts thoroughly to ensure that you are purchasing the model that has the highest height capacity for your individual needs.
What is a Skyjack lift?
A skyjack lift is a type of aerial work platform (AWP), otherwise known as a manlift or an aerial lift. It is designed for personnel to be safely lifted up to a height above the ground. AWPs are commonly used for tasks such as changing light bulbs, painting, performing maintenance, or inspecting high places.
Skyjack lifts are usually small in size, as they are meant to be used by only one or two people, and their mobility means they can be used in even the tightest of spaces. Skyjack lifts feature platforms with guardrails, allowing personnel to be safely secured, and the controls for the lift and heel bar are separate to allow for safe and precise operation.
Skyjack lifts are generally powered by any type of standard electricity source, such as an extension cord or vehicle battery, and they are also very quiet when in use.
How do you use the Skyjack scissor lift?
Using the Skyjack Scissor Lift is relatively simple. First, make sure the area is level and free of any obstacles. Once the lift is set up in the desired area, use the directional arrows to move the lift into position.
Then, you will use the controls to determine how far off the ground you want the operator to be lifted. If you’d like, use the safety lockouts that come with the scissor lift to prevent any unwanted movement.
When you’re ready to raise the lift, turn the key to an on position and press the UP button. The lift will begin raising, and can be further adjusted by using the UP and DOWN buttons. As the lift is moving up or down, ensure that its movements are smooth and consistent; if the lift is jerking or beginning to tip, press the DOWN button to bring it down to a safe level.
Once you’ve reached the desired height, press the DOWN button to lower the lift. Continue to monitor the lift’s descent by pressing the DOWN button as necessary. If the lift is approaching the ground, press the DOWN button one more time to set its brakes.
Then, turn the key to the OFF position and remove from the keyhole. Make sure the area is clear of any obstacles before stepping onto the platform.
Now that you’re safely on the platform, use the horizontal controls to move the lift before engaging the foot lever. There will be an indicator light that tells you when the lift is ready to go; press the button when it’s green and make sure the lever is in the down position.
Afterward, press the UP button to raise the lift.
When you’ve reached the desired height, it’s time to return the lift to the ground. Press the DOWN button, then monitor the lift’s descent. Once the lift approaches the ground, press the DOWN button one more time to lock the brakes.
Turn the key to the OFF position and remove it from the keyhole. The scissor lift is now ready to be repositioned and used again!.
How do I put legs down on Skyjack?
In order to put the legs down on a Skyjack, you will need to first check if there is any debris or debris blocking their path. If so, remove it. You may also need to adjust the position of the machine to ensure the legs can extend properly.
Once that is complete, you will need to use the control box to control and lower the legs. For most Skyjack lifts, the controls will include a switch to enable the legs to begin deployments, followed by an activation button that will activate the power.
While extending the legs, you will need to monitor their progress and make sure they are extending correctly, You may also need to ensure that they are not making contact with any hard surfaces while they are descending.
Once the legs have been deployed and locked, the Skyjack should now be positioned correctly and ready for use.