The amount of time the Dolphin pool cleaner runs is dependent on the size of your pool, the filter system, the amount of debris and other objects in the pool, and the type and model of the pool cleaner.
Generally speaking, it is recommended to run the pool cleaner 3 to 4 hours a day for optimal performance. However, if there is a large amount of debris or if the pool is large, it may need to be run for longer periods of time.
It is also important to thoroughly inspect the pool for any debris prior to using the pool cleaner to ensure it does not get stuck or clogged in the filter system. Additionally, it’s important to empty the filter bag regularly to ensure the pool cleaner operates efficiently.
How long is Dolphin Nautilus cycle?
The Dolphin Nautilus Robotic Pool Cleaner offers a cycle time of up to 2 hours and allows you to set the cycle time to best fit your pool. The cycle time flexibility enables you to clean your pool faster when multiple sections need to be cleaned.
The Nautilus also has a Dual Scrubbing Brush System that rotates in opposite directions to remove stubborn dirt and debris easily. This high-performance robotic cleaner has an energy-efficient motor that runs quietly and efficiently.
It comes with a cartridge filter that traps large debris while a fine filter catches the smallest particles. Equipped with smart navigation, the Nautilus is able to take a more efficient path in cleaning your pool so that it scans and cleans your pool quickly and thoroughly for a well-groomed pool in less time.
Why does my Dolphin pool cleaner stopped working?
If your Dolphin pool cleaner has stopped working, there are a few possible causes that you should investigate. First, make sure that the electrical cord is firmly plugged into the power source and check to see if the power is running to the cleaner.
If the power is on but the cleaner isn’t running, then you may need to check the filter bag to make sure it isn’t full and blocking the flow of water. You may also need to check the skimmer box filter to ascertain that it is clear and not clogged with debris.
If these steps don’t correct the issue, then you should inspect the internal parts of the cleaner for any damage that may be blocking it. Make sure to check the motor, belts, wheels, axles, brushes and impellers to look for any debris blocking the rotation or any damage that may be interfering with the proper functioning of the cleaner.
If you discover any damage, then you may need to replace the part, and in some cases, the entire unit may need to be replaced.
Finally, if you are still unable to get your Dolphin pool cleaner running, then you may need to seek professional help from a reputable pool service company. They will be able to diagnose the issue and advise you on the best course of action to get your cleaner up and running again.
Can I leave my Dolphin pool cleaner in the pool overnight?
No, it is not recommended to leave your Dolphin pool cleaner in the pool overnight. Dolphin pool cleaners were designed to thoroughly clean your pool in a short amount of time and should be removed after the cleaning cycle is complete.
Leaving a pool cleaner in the pool over night can cause the unit to clog, potentially leading to damage or failure. In addition, leaving a unit in the pool can make it a target for animals and debris that may fall into the pool.
To ensure the safety of your pool, it is best to remove the pool cleaner from the pool after the cycle is complete.
Can you leave Nautilus CC plus in pool?
Yes, you can leave the Nautilus CC Plus In Pool, as it is designed to be used in the water. The Nautilus CC Plus is an aquatic exercise machine that provides an effective low-impact workout in the pool, making it perfect for physical therapy, rehabilitation, and general fitness.
The machine uses hydraulic cylinders to provide resistance with minimal impact to your joints, while the user swims against the resistance. With the Nautilus CC Plus, you can work out various muscle groups, such as your arms, legs, chest and back.
The machine also features an adjustable tension system and a movable seat so you can adjust the machine’s resistance level depending on your needs. With its water-resistant design, the Nautilus CC Plus can provide an effective, low-impact workout in the pool.
How do I get Dolphin cleaner out of my pool?
If you have Dolphin cleaner in your pool that you need to remove, the process isn’t that complicated. The first thing to do is to empty the pool and thoroughly clean it to remove any dirt and debris from the surface.
Once the pool has been emptied and cleaned, you’ll need to add a water soluble cleaner to the water. Make sure to check the instructions for your particular cleaner so that you use the correct dosage.
The cleaner will dissolve the Dolphin cleaner, making it easier to remove.
The next step is to allow the cleaner to sit in the pool for one to two hours. While it’s sitting in the water, be sure to frequently check the pH of the water and add the necessary chemicals to keep it balanced.
Once the time is up, the next step is to vacuum the Dolphin cleaner out of the pool. You may need to repeat the process of adding the cleaning agent and allowing it to sit in the water for another 1-2 hours in order to completely remove all of the debris.
Finally, be sure to backwash your filter and clean or replace the filter cartridges to be sure all the particles have been removed. You may also want to shock the pool once the Dolphin cleaner has been thoroughly removed.
Once everything has been taken care of, your pool should be as good as new.
Why is my Dolphin Nautilus not moving?
Your Dolphin Nautilus not moving could be caused by a variety of reasons. It could be due to a mechanical malfunction, or it could be caused by something interfering with the robot’s operation.
First, you should check for any mechanical issues. Make sure the robot is plugged in and that its power cord is securely inserted. If it still does not move, try turning it on and off a few times and see if it starts to move.
Additionally, check the robot and its power cord for any visible damage. If you can’t see any damage, then it’s possible there is an internal problem, such as a circuit board failing or a motor burning out.
In these cases, the robot will need to be brought to a service center for diagnosis and repair.
Next, you should check to make sure there are no obstacles in the area that could be preventing the robotic pool cleaner from moving around. If you have any furniture or equipment in the pool, make sure there is enough clearance in the area around the Dolphin Nautilus.
Additionally, check the bottom of the pool and make sure there is no debris or other objects blocking the robot’s movement.
If all of the above steps have been performed and the Dolphin Nautilus is still not moving, it may be a sign of a more serious problem. In this case, it is advised to discontinue the use of the robot, disconnect the power cord and contact your local authorized service center for further assistance.
How does Nautilus pool cleaner work?
Nautilus pool cleaners are robotic pool cleaners that are designed to clean your pool from top to bottom. The Nautilus automatic pool cleaner is powered by a motor that uses pressure from your skimmer or dedicated suction line to move it about the pool.
As it goes about its task, the Nautilus cleaner picks up dirt and debris from the pool’s bottom and walls, leaving the surface and water line clear. As the cleaner makes its way around the pool, it brushes the walls while vacuuming the bottom and steps – it works to loosen and remove stubborn dirt and grit.
The Nautilus vacuum then traps the collected debris in a reusable filter bag, and deposits it at the designated filtration station inside the pool.
The Nautilus pool cleaner is great for running maintenance cycles on a daily or weekly basis according to the manufacturer’s recommended schedule. This not only ensures clean and clear pool water all season, but also keeps the pool filter from clogging with dirt and grime.
The Nautilus cleaner’s brush-action cleaning system can also help to reduce the need for costly chemicals – as it scrubs away dirt and buildup from the walls of the pool, it helps to prevent algae from forming and keeps pH levels in balance.
How long is the cleaning cycle on a Nautilus CC plus?
The cleaning cycle on a Nautilus CC plus depends largely on the personal preference of the user. The Nautilus CC plus does not offer a specific cleaning cycle as it is designed to provide continuous, adjustable suction power.
However, the general rule of thumb is to clean the filter canister, dust bin, and post-motor filter at least once a month. To do this, empty the dust bin after each use and remove the filter canister and post-motor filter monthly.
Clean these components with a cloth dampened with warm water and mild soap, then allow the components to dry completely before reassembling. If you choose to use cleaning solutions, refer to your Nautilus CC plus manual for recommended cleaning solutions.
The length of time required for cleaning will vary depending on personal preference and the amount of cleaning that needs to be done.
Is it OK to leave pool vacuum in pool?
No, it is not OK to leave the pool vacuum in the pool. Pool vacuums make it easy to remove debris and dirt from the pool, but leaving them in the pool for long periods of time can be detrimental to the health of the pool.
When left in the water for long periods of time, the pool vacuum can cause excessive suction that can pull in too much dirt and debris into the filter system, leading to clogged filters and improper circulation.
In addition, a pool vacuum left in the pool is at risk of becoming damaged from wear and tear. Lastly, a pool vacuum left in the pool can cause an imbalance in the chemical levels of the pool, leading to cloudy, murky water.
It is best to remove the pool vacuum after use to ensure a safe and healthy pool.