The amount of material required to cover a wingback chair will depend on several factors, such as the size of the chair, the depth of the seat, and the length of the arms. At an absolute minimum, you would need 2.
2 meters of fabric, assuming a regular-sized chair. However, if the chair has thick padded arms and a deep seat, you will require more fabric. As a general rule of thumb, it is recommended that you provide 3.
5 – 4 meters of fabric when covering a wingback chair. It is also helpful to have an extra 0.3 meters of fabric on hand, to allow for pattern matching and potential fabric wastage.
How do you make a slipcover for a wingback chair?
Making a slipcover for a wingback chair is a great way to update the look of a room without having to purchase a new furniture item. Plus, you can make a slipcover easily with just a few basic sewing supplies and tips.
First, you’ll need to measure your wingback chair. Make sure you get the length, width and depth of the seat, arms, and back. This will help you get the right fit when cutting and sewing your slipcover.
Next, you’ll need to choose the fabric for your slipcover. You can make it last longer by choosing a fabric that is made of durable material such as denim or canvas.
Once you have the fabric and measurements, you can begin to cut out a pattern. Be sure to leave extra material at the edges for seam allowances. Make sure to include large darts at the back, sides, and arms for a more tailored look.
Now that you’ve got the pattern, you can start to sew your slipcover. First, sew the darts and seams. Next, pin the pieces together. Then, sew together the side and arm panels along the outer edges. Finally, hem the bottom edges of the slipcover and add zippers, if desired.
Once your slipcover is complete, you can slip it over your wingback chair and enjoy the new look. With a slipcover, you can easily change the style of your wingback chair anytime.
How do you measure a wingback chair for a slipcover?
Measuring a wingback chair for a slipcover requires measuring both the inside and the outside of the chair, as the size and shape of the slipcover will be based on the overall dimensions of the chair.
When measuring the inside of the chair, begin at the seat. Measure the width and the depth of the seat at its widest and deepest points and make a note of both. Next, measure the height of the back of the chair from the seat up, and make a note of this as well.
For the outside of the chair, start by measuring from the top of the back of the chair down to the floor. Then, measure from one side of the chair, around the front, and to the other side of the chair.
Make a note of both measurements. For the front of the armrests, measure from the outside of one armrest to the other, making sure to measure the depth of each armrest and making a note of both measurements.
Once all of these measurements have been logged and marked, use them as a guide to choose a slipcover which will fit the size and shape of your wingback chair.
How many yards of fabric do I need for a chair slipcover?
The amount of fabric needed for a chair slipcover will depend on the size and shape of the chair. Generally speaking, most chairs require approximately 6-7 yards of fabric for a standard size chair slipcover.
If the chair has a more complex shape, such as arms and/or extra cushioning, then the amount of fabric recommended will increase. Additionally, the amount of fabric needed to create a pleated or gathered style of chair slipcover will also be greater than a plain style.
It is important to measure the specific chair first to determine the exact amount of fabric needed prior to purchasing.
How much fabric does it take to slipcover a sofa?
The amount of fabric needed to slipcover a sofa will depend on a number of factors, including the size of the sofa, the type of fabric being used, the complexity of the slipcover design, and any decorative elements or embellishments that may be included.
Generally speaking, it is recommended to purchase approximately 10-15% more fabric than is calculated to be necessary for a simple, fitted slipcover. This is because fabric may stretch or shrink, be damaged during the cutting or sewing process, or be chosen with non-matching dye-lots.
Additionally, having extra fabric on hand allows for more flexibility when creating more complex designs like pleats, gathers, and buttons. A standard-size (85 in to 90 in) sofa will require 8-10 yards of medium- to heavyweight fabric.
A loveseat may require 6-8 yards, while a chair may require 2-3 yards.
How do I calculate loose fabric covers?
To calculate the amount of fabric needed for loose covers, you will need to measure the width and depth of the furniture that needs to be covered. Once you have the measurements, you must decide how much extra fabric you would like to gather around the sides, bottom and back of the furniture.
The more fabric you use, the more “loose” the supporting will be.
Next, you will want to add four to five inches of extra fabric for the seam allowance. This means that for every linear inch of furniture, you will need an additional five inches of fabric to accommodate boxes, gathers, and other pleats.
After you have determined your total fabric requirement, you can then measure the width of the fabric that you have purchased or plan to purchase and determine how many yards are needed.
For instance, if the furniture you are covering is five feet wide and you decide you would like an extra four inches of fabric around each side, you would need to subtract eight inches from your total measurement.
This would then give you a total requirement of 60 inches for the fabric width. If the fabric you choose is a standard 54 inches wide, you would need to purchase any additional fabric needed to reach the total requirement of 60 inches.
The cost of the fabric will depend on the quality of fabric you choose and per linear yard or meter.
Once you have the fabric, the actual “sewing” of the loose cover is fairly straight forward. You must begin by creating panels by connecting multiple pieces of fabric together. These panels will becomes the loose covers and you should be prepared to trim down excess fabric as you sew.
You can add darts, gathers and pleats to achieve a desired look as well. Once your panels are cut, you must then be prepared to sew the panels together to cover the furniture. It is always a good idea to make a mock up version of the cover first out of a cheaper fabric in order to ensure a better fit prior to cutting the more expensive fabric.
How do I measure how much fabric I need?
Measuring the amount of fabric that you need is generally a fairly simple process. The amount of fabric needed will depend on the measurements of the project that you’re working on as well as the type of fabric that you’re using.
First, measure the dimensions of the project that you’re making, including length, width and depth (if applicable). Then, measure the type of fabric that you’re using and take note of the width of the fabric, whether it’s per yard in width or another measurement.
Once you have all of these measurements, you can use a formula to calculate the amount of fabric you’ll need. The formula is (length of project) x (width of project) / (width of fabric), and the answer you get from the formula will give you the number of yards of fabric you’ll need to complete your project.
When calculating the number of yards, you want to make sure that you’re rounding up the answer, as it’s better to have slightly more fabric than not enough. You also want to take into account extra fabric for seams or any other modifications that might need to be done.
Once you have your measurements, the formula, and an understanding of how much extra fabric to plan for, you’ll have a good idea of how much fabric you need for your project.
How wide is fabric on a roll?
The width of fabric on a roll can vary greatly depending on the type and weight of the fabric. Generally speaking, lightweight fabrics like apparel and home decorating fabrics typically come on a roll that is around 60” wide, while heavier materials such as upholstery fabrics and upholstery vinyl often come on rolls that are wider and are typically around 54″ – 72″ (or sometimes even wider).
Additionally, different manufacturers may call different widths by different terms, so it is important to verify with the manufacturer exactly how wide a particular fabric is on a roll.
Is it hard to make a slipcover?
Making a slipcover can be a challenging yet rewarding task, depending on the complexity of the furniture you’re covering. The most important factor in successfully making a slipcover is having the right measurements and cut for the fabric as it fits to the furniture.
If the measurements are off even slightly, the cover will not look right, and it will be hard to adjust the material to fit properly. Besides taking the proper measurements, slipcover-making also requires accurate marking, cutting and pinning of the fabric to fit the furniture.
It also requires knowledge of basic sewing techniques, such as seam binding and gathered pleats. If you’re unfamiliar with sewing, then making a slipcover might be more tedious and challenging than usual.
Nevertheless, with patience and practice you can learn to make a simple slipcover that fits snugly on the furniture. With professional assistance and guidance, you can make a slipcover that provides a brand new look to your furniture, and it can save you the cost of buying a new one.
How do you cover a chair with a sheet?
Covering a chair with a sheet is quite easy and makes it look new and fresh. The first step is to measure the chair, taking note of its length, width and height. You will want to make sure that you purchase or make a sheet that is two to three inches longer, wider and taller than the chair.
Once you have the right size sheet, turn the chair over, and place the sheet over the back and sides of it. Begin at the top of the chair and securely attach the sheet to the frame using safety pins, making sure to leave a few inches of extra fabric.
To secure the sheet around the legs of the chair, you can cinch it and secure it with the safety pins. Likewise, for extra security you can fold the excess fabric around the edges of the seat and pin securely into place.
Finally, if there are any ruffles or pleats, use small pins to secure them into place. With a few simple steps, your chair should now be snugly covered with a sheet.