The number of sharpenings a chainsaw file is good for depends on a variety of things, including the type of file, the quality of the file, and the type of chainsaw chain being sharpened. Generally, a good quality chainsaw file should be good for 8-10 sharpenings.
However, some high-end, heavier duty chain files may be able to get up to 15-20 sharpenings, if used with appropriate care and for the correct type of saw chain. To get the most out of a chainsaw file, it is important to sharpen each tooth at the same angle, ensuring that the file is properly aligned and that it is pushed in the same direction on each tooth.
Furthermore, the file should be cleaned and stored properly between sharpenings to keep it in good operational condition.
What size file do I need for a Stihl .325 chain?
The file size that you need for a Stihl. 325 chain will depend on the kind of cutters that are on your chain. You will need to check with the manufacturer for the exact file size for your specific chain.
Generally, for Stihl. 325 chains, you will need a file size of either 4mm, 5/32″ or 6.35mm. If you are using a reduced chisel chains with square-cornered cutters, you would need a 4mm file, while you would use a 5/32″ file for full chisel chains with round-cornered cutters and a 6.
35mm file for full chisel chains with square-cornered cutters.
How do you measure a chainsaw chain sharpener?
Measuring a chainsaw chain sharpener means assessing the wear and tear on the chain and the effectiveness of the sharpener itself. The most important factor is to make sure the chain remains sharp and the sharpener is certiNeed to gauge the effectiveness of that sharpener.
This can be done by making sure it has all the necessary parts, and that the cutting surfaces are in good condition. Additionally, you should make sure that the depth gauge settings are properly adjusted and that the depth gauges are properly engaged on the chain while it’s in use.
Additionally, unless the saw needs a new chain, the chain should be removed from the sharpener and checked for accurate cutting angles and proper “hook” formation on the cutters. Finally, a visual inspection should be done to make sure there is no excess material built up on the sharpener.
What is the most common chainsaw chain size?
The most common chainsaw chain size is 3/8”, which covers almost all of the popular saws in use today. This size is preferred because it provides a good ratio of strength, cutting performance, and maneuverability, making it great for a wide range of tasks.
The 1/4”, 3/8” low profile, 0.325”, and 3/4” sizes are among the most popular choices in the market. Having your saw sized properly is essential because a saw’s power and efficiency are dependent upon the correct chain size.
Always be sure to read your chainsaw’s manual to determine the correct size for your saw.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain is their pitch size. 325 chain has a pitch of. 325 inches, whereas 3/8 chain has a pitch of. 375 inches. Pitch is the distance between any three consecutive rivets divided by two.
Pitch also determines the size of the drive sprocket, the guide bar and saw chain. Chain with a smaller pitch requires a smaller drive sprocket, bar, and chain. This is because a narrow pitch allows for higher RPMs, allowing more cutting power while requiring less kickback.
The benefit of 3/8 chain is that is it more durable and can drive larger chainsaws, but it requires more energy and generates more kickback. Ultimately, the choice between. 325 and 3/8 chain will depend on the size of the saw and the user’s preference.
How many drive links in a 18 inch chainsaw?
Most 18 inch chainsaws have 58 drive links in the chain. The drive link is the metal part of the chain which goes between the cutting teeth and links the whole chain together. The number of drive links will depend on the type of chainsaw, as well as the specific model.
You can find out the exact number of drive links for your chainsaw by checking the specifications provided by the manufacturer. Generally, having the correct number of drive links helps the chain remain tight, which will ensure it runs smoothly and cuts effectively.
If there are too few drive links, the chainsaw may be difficult to use and may pose a safety risk.
Are all 18 inch chainsaw chains the same?
No, not all 18 inch chainsaw chains are the same. The size of a chainsaw chain is the total length, which includes the drive-links, cutters, and other components. Each model of chainsaw will require a different pitch and gauge, so it’s important to be aware of the specific measurements of your chainsaw before attempting to replace its chain.
Chainsaw manufacturers use various techniques to make their chains unique; for example, some use different sizes and shapes of drive-links, different number of cutters per inch, or unique cutting angles.
Additionally, chainsaw chains can be produced in standard or low-kickback varieties, each of which is designed to provide different levels of performance. Therefore it is important to research the specific requirements of your chainsaw before attempting to purchase a new 18 inch chainsaw chain.
How do you determine the length of a chainsaw blade?
To determine the length of a chainsaw blade, it is important to first measure the guide bar, or area where the chain runs, on your chainsaw. This bar is typically measured in inches, ranging from 10-20 inches.
The length of the blade should match the length of the guide bar, as a longer blade can cause the chainsaw to be top-heavy, and can be a safety hazard. Additionally, a blade that is too short will not be able to make the necessary cuts.
The packaging the blade comes in should list the compatible size, so be sure to double-check when purchasing the correct blade for your chainsaw.
What do the numbers on a chainsaw bar mean?
The numbers on a chainsaw bar indicate the length of the bar measured in inches. It’s important to make sure you buy the right size bar for your particular model of chainsaw, as the wrong size bar won’t fit and will make it difficult for your chainsaw to operate.
Smaller chainsaws typically have bars that are 14 to 16 inches in length, while larger chainsaws might require bars that are up to 20 inches in length. Additionally, some chainsaw bars come with a “chain gauge” printed or stamped onto the beginning of the bar.
The chain gauge indicates the required size of the chain that will fit on the bar. As an example, a bar with a gauge of. 050 indicates that it requires a chain with a 3/8 inch pitch and 50 drive links.
Is it worth sharpening a chainsaw chain?
It is definitely worth sharpening a chainsaw chain. Chainsaws are powerful pieces of machinery, but they are only as good as the sharpness of their chain. When the chain gets dull, it won’t cut as efficiently and take more time to do the same job.
It will also be harder on the motor and the chainsaw, putting more strain on the system. Chainsaw chains can be sharpened with a file or a grinding stone. It’s a fairly straightforward process that can extend the life of the chain and increase the performance of the saw.
There are also professional sharpening services available, if you don’t feel confident sharpening the chain yourself. It’s definitely worth sharpening a chainsaw chain, as the time and money invested will pay off in the long run.
Can I put a different size bar on my chainsaw?
Yes, you can put on a different size bar on your chainsaw. The size of the bar will depend on the size of the chainsaw engine and the type of work you plan to do. If the chainsaw engine is small, then you should look for a bar size that is more compact.
If the chainsaw engine is larger, then you should consider a longer bar. It is important to consider the type of work you plan to do – if you’re cutting large trees and logs, then you should choose a larger bar.
When selecting a different size bar for your chainsaw, be sure to research the maximum cutting capacity of your chainsaw and the type of chain that is best suited for the chain you are using. It’s also important to select the right type of chain, such as a full skip, ¼ pitch chain, or 3/8” low profile chain.
Additionally, make sure that the bar you select is long enough to fit your current chain – otherwise, you may need to purchase a longer bar.
Finally, remember to take proper safety precautions when changing your bar. Make sure that you have unplugged the chainsaw and ensure that it is properly stabilized before attempting any changes. Wear protective gear, such as eye and ear protection, and be sure that you are familiar with the proper replacement procedure.
What size bar is on my chainsaw?
The size of the bar on your chainsaw depends on the model and size of the chainsaw. Typically bars range from 6 to 24 inches long for the standard chainsaw. For the more professional models, bars can be even longer.
The amount of power that your chainsaw has will also be a factor in the size of the bar. The bigger the bar, the more powerful the engine is. Checking the manual that came with your chainsaw is the best way to determine the exact size of the bar on your chainsaw.
What pitch is a .325 chainsaw chain?
A. 325 chainsaw chain is a type of chainsaw chain that has a pitch of. 325 inches, which is one of the most common chain sizes for many chainsaws. This chain size is typically used on chainsaws with small bars ranging from 8 to 14 inches.
Due to the smaller size chain, the chain is lighter and easier to maneuver than bigger chains. The. 325 chain size is widely available in a large variety of chain style types, such as semi-chisel, full-chisel, and semi-skip.
In addition to being more lightweight, the. 325 chain size is also better suited to a wide range of applications from general wood cutting and domestic work to light industrial applications such as limbing and bucking. The.
325 chain size also comes in a variety of chain materials, including carbon steel, brass, and stainless steel, allowing users to choose the chain type that best suits their particular chain saw application.
What chainsaw pitch is best?
The best type of chainsaw pitch depends on the job you need to do. For common homeowner jobs like pruning and trimming, a 3/8 inch pitch is sufficient. An 0.325 inch pitch is common for basic cutting tasks, and would be better for occasional use.
For heavy-duty jobs like milling or storm cleanup, a 0.404 inch pitch is ideal. Chainsaw pitches are identified by the gauge and drive link count. Generally, the higher the gauge and drive link count, the more robust the chain.
The right type of chainsaw pitch depends on the type of job and the power of the chainsaw to be used. Additionally, it’s important to make sure the chain is the right size for the bar on your saw. Choosing the wrong chainsaw pitch can be dangerous and can even lead to personal injury or damage to property.
Consult a professional before choosing the best pitch for your needs.