The number of stitches required to knit a cushion cover will depend on the size of the cushion you would like to make, as well as the type of stitch and the yarn weight. Generally speaking, for a cushion that is approximately 16 inches square you will need around 141 stitches (this can vary depending on the gauge and tension you choose).
For a cushion that is 18 inches square, you will need around 163 stitches. If you are using a single knit stitch then you will need to multiply the number of stitches by 2 to get the total number of stitches (e. g.
141 x 2 = 282 stitches). In addition to the number of stitches to get the size you would like, you will also need to increase or decrease the number of stitches so that it works with the pattern you are using, and factoring in the type of knots and edges you prefer.
How do you knit a simple cushion?
Knitting a cushion can be a great introduction to crafting. Cushions are a great project to practice new stitches and gain experience in manipulating different textures.
Here is a basic tutorial on knitting a cushion cover:
1. Decide what size cushion cover you want to make. You’ll need to measure the cushion or cushion pad before you start to ensure the cover fits properly.
2. Choose the type of yarn that you want to use. To make the cushion cover, you will need to buy a good-quality yarn and some circular knitting needles. The size of the needles will depend on the thickness of the yarn.
3. Calculate the required number of stitches. Use a stitch-per-inch calculator to determine the number of stitches you will need. This will depend on the size of the cushion and type of needles and yarn you are using.
4. Cast on the stitches. Determine whether to use the long-tail or backward loop method of casting stitches on to the needles.
5. Start knitting. Use the knit stitch until the fabric measures the desired size. For a pillow cover, double stitch and rib stitch can be used for a decorative effect.
6. Bind off the stitches. This will be the last row of knitting for the cushion cover.
7. Join the edges of the cushion. Depending on the shape of the cushion, the edges can be seamed or joined with the help of a tapestry needle.
8. Block the cushion. This will help even out the stitch tension and give the cushion a neat finish. Place the piece on a damp towel and use blocking pins to help shape it.
9. Add finishing touches. If desired, add a few small decorations, like tassels or pompoms, to the cushion cover.
10. Insert the cushion pad. Make sure that it fits properly and looks attractive.
And you’re done! Follow these steps and you’ll have a custom-made cushion cover in no time.
What size do I cut cushion covers?
The size of the cushion cover you need to cut depends on the size and shape of the cushion you are covering. Cushions come in all shapes and sizes, and so does cushion cover. To determine the size you need to cut for your cushion cover, you will need to measure the length, width and depth of your cushion.
Once you have all these measurements, you will need to add 1 inch around all edges to ensure that the fabric is large enough to cover the cushion and allow for seam allowances and/or zipper. You will also need to add 1/2 inch additional allowance to the depth if you are using a zipper closure.
This measurement will be the finished size of your cushion cover and will be the size you will need to cut your fabric. Keep in mind, it is usually better to have the fabric slightly larger than you need, as you can always cut down if needed after all the seams are complete.
How much bigger should a cushion cover be than the cushion?
When it comes to making cushion covers, you want to make sure they are slightly bigger than the cushion they are intended to cover. Generally, it’s recommended that you add an extra two inches of fabric to the length and width of the cushion.
This will ensure that the cover will fit correctly and not be too tight around the edges. Additionally, you may want to add a few extra inches to the seam allowance to make sure the cover is even more generously sized.
This will make it easier to put on and remove and will also give the cushion a more friendly, homey appearance.
How do I calculate how much fabric I need for a cushion?
To calculate how much fabric you need for a cushion, you must first measure the cushion or the space you are using it in. Measure the width of the cushion, plus the depth of the cushion, and then add 4 inches to each measurement.
This will give you the finished size of the cushion cover. Once you know the finished size of the cushion cover, you can use this measurement to calculate how much fabric you need. In general, you need twice the finished size of the cushion plus 1/2 inch for seam allowances.
For example, if the finished size of the cushion cover is 16 inches wide by 12 inches deep, you would need 33 inches of fabric (16 x 2 = 32 + 1/2 inch for seam allowances = 33 inches of fabric).
Will an 18×18 pillow cover fit a 16×16 pillow?
No, an 18×18 pillow cover will not fit a 16×16 pillow as the cover is larger than the pillow. Pillow covers are typically made smaller than the pillow size in order to create a snug fit and a tailored look.
If you try to put an 18×18 cover over a 16×16 pillow, you may be able to stretch it, but it will leave excess fabric, which will not be aesthetically pleasing and may also cause the pillow to move around or shift inside the cover.
Therefore, it is best to use a correctly sized pillow cover to obtain the desired look.
What size pillow do you put in a 18×18 cover?
The size pillow you put in a 18×18 cover would depend on the style of pillow you’re looking to use. If you’re using a traditional square pillow, then you would typically use an 18×18 pillow insert in that cover, as it should be the same size or slightly larger.
However, if you’re using a throw pillow with a thicker profile on either side, then you may want to opt for a 20×20 size pillow to ensure a snug fit in the 18×18 cover. In most cases, a traditional, flatter pillow insert will work best in an 18×18 pillow cover.
How do you determine cushion size?
Determining the size of a cushion ultimately depends on the size and shape of the furniture for which it will be used. If the furniture does not already have fitted cushions, measurements of the seat, back and arms should be taken as a starting point.
Subtract two inches to accommodate the cushion’s thickness and add two to four inches extra if you plan to use decorator pillows. A larger cushion provides a more comfortable, softer appearance while a smaller cushion will create a firmer and firmer look.
It is best to opt for the larger size when selecting a cushion. To ensure a cushy seat, aim for a cushion size at least two to three inches higher than the depth of the seat and a width that is two inches more than the distance between the arms.
What is the standard size of a cushion cover?
The standard size of a cushion cover is 18″ x 18″ (45cm x 45cm). There are however different cushion sizes available on the market, depending on the type of cushion being used and the desired aesthetic.
Common sizes for decorative pillows are 16″ x 16″ (40cm x 40cm), 17″ x 17″ (43cm x 43cm), and 20″ x 20″ (50cm x 50cm), but there are many more sizing options available. Most cushion covers have a zipper that allows for the cover to be easily removed for cleaning or replacement.
If a custom size is needed, many manufacturers offer options for custom sizes and can accommodate many customer requests.
Should cushion covers be smaller?
No, cushion covers should not be smaller. Depending on the type of cushion you have, you should select a cover size that accommodates the cushion without being overly tight or loose. If the cover is too small, the edges and corners of the cushion will not fit in it properly.
Too large of a cushion cover may not fit around the cushion securely and looks sloppy. Therefore it is best to purchase a cushion cover with the correct size, either slightly bigger or slightly smaller than the cushion.
Additionally, the fabric of the cushion cover should be selected with the correct fabric type to ensure proper fit, as stretchy fabrics will be able to accommodate slightly larger cushions while stiffer fabrics may need a smaller size.
Overall, cushion covers should not be too large or too small, but rather an appropriate and comfortable size to fit around the cushion.
Should pillow insert be larger than cover?
The answer to this question depends on a few factors. Generally speaking, it is best for your pillow insert to be slightly larger than the pillow cover for a number of reasons. The insert should be slightly larger to ensure that it fits well in the cover and that it stays in place.
If the insert is too small, it will not fill out the cover properly and make the pilllow look lumpy and uneven. Additionally, if the insert is too small, it won’t provide adequate support and may not hold up against daily use.
The insert should be slightly larger than the cover to add in extra loft and cushioning, which will make the pillow more comfortable and look fuller. Overall, when buying a pillow insert, it’s best to get one that is slightly larger than the pillow cover you have to ensure the best look and feel.
How big should sofa cushions be?
The size of your sofa cushions should depend on the size of your sofa, as well as the level of comfort you want. Generally, you will want to purchase cushions that are slightly larger than the size of your sofa for the best look and comfort.
If the cushions are too small, they will be uncomfortable and leave you feeling like you’re sitting on the edge of the sofa.
Smaller sofas will typically call for smaller cushions, whereas large and oversized sofas will require larger cushions. As a rule of thumb, back cushions should measure between 20-24 inches wide and 20-28 inches tall.
Seat cushions would typically measure 24-28 inches wide and between 18-22 inches tall.
It is also important to choose a cushion filling that corresponds with the level of cushioning and comfort you need. Softer cushions offer more cushion and support, while firmer cushions offer more shape and less sinking.
Memory foam and high-density foam are popular choices for sofas, while feather and down offer lower levels of support and are more prone to flattening over time.
What size zip do I need for a cushion?
The size of zip you need for a cushion can depend on a number of factors, including the size and shape of the cushion itself and the fabric it is made from. Generally speaking, the larger the cushion is and/or the thicker the fabric, the thicker the zip will need to be.
Most cushion covers are typically made from either lightweight fabrics or medium to heavyweight fabrics. If you are using a lightweight fabric such as cotton or linen, a small, lightweight zip will usually suffice.
If the cushion cover is made from a fabric like canvas or velvet, a thicker, sturdier zip is necessary to ensure that it can withstand regular use. If in doubt, it is always wise to take a swatch of the fabric to your local haberdashery and ask them which size they recommend.