If you are making a pillow cover, typically you need 1 yard of fabric to cover a pillow. However, if you have an especially thick pillow or a pillow larger than 16″ by 16″, you may need more fabric. If the pillow is a rectangular shape instead of a square shape, you may need even more fabric depending on the size.
It is recommended that you measure your pillow before purchasing fabric and select the amount of fabric that you need.
How many yards is an 18×18 pillow?
A 18×18 pillow is equal to 162 square inches. Since there are 9 square feet in a yard and 144 square inches in a square foot, that would mean the pillow is equal to 1.11 yards.
How much fabric do I need to make a 18×18 pillow cover?
You will need approximately 1 yard of fabric (36”W x 54”L) to make a 18×18 pillow cover. Measure the pillow form you are using and then add ¼-½ inch to each side to account for seam allowances. If the pillow form is 18×18, this will bring the finished size of the pillow cover to 18.5×18.
5, so you will need at least 1/4 yard (9”W x 54”L) to make the complete cover. For an 18×18 pillow, a fat quarter (18”W x 21”L) of fabric will also be enough to make the cover. If you are using a thinner fabric, you may have to purchase a bit more fabric to make a fuller pillow cover.
Can you make a pillow with 1 yard of fabric?
Yes, it is possible to make a pillow with 1 yard of fabric. Depending on the size of the pillow being created, you may need to make some slight adjustments to the size, such as making a slightly smaller pillow or making the sides slightly bigger.
Additionally, you could also use a combination of different prints and/or materials.
The first step to making a pillow with 1 yard of fabric is to decide on the shape and size of pillow you’d like to make. Once you have that figured out, you can measure and cut the fabric accordingly.
Depending on the size of the pillow and the type of fabric you choose, you may need to sew together small panels of fabric to form the size you’d like. If the fabric is lightweight or has a tendency to fray, consider using double-sided fabric fusible tape on the edges to make sure the fabric does not fray.
Next, sew together the edges of the fabric pieces. This can be done simply by using a straight stitch on a sewing machine or by using a hand stitch. Consider using a zipper closure or a velcro closure to make sure the pillow stays closed.
You can also use an envelope closure or a button closure if desired.
Finally, put some stuffing into the pillow cover that you have made with your 1 yard of fabric. Once secure, you will have your very own custom-made pillow. This should take around 1-2 hours depending on the size and shape of the final product. Enjoy!.
How do you sew a zippered pillow with piping?
Creating a zippered pillow with piping is a simple task that requires some basic sewing knowledge and a few supplies.
First, you will need to cut your fabric for the pillowcase. Measure the width and length of the pillow insert and add an extra inch or two to each side for seam allowance. Then, using a rotary cutter or scissors, cut two pieces of fabric for the pillowcase, 2-3 inches wider than the pillow insert.
Set the pieces aside and cut two long strips of fabric for the piping. The strips should be twice the width of your piping and long enough to run the length of both sides of the pillowcase.
Next, pin the piping to one side of the fabric. Start at one corner and work your way around the pillowcase until the end of the piping meets the beginning. Then, use an iron to press the fabric to ensure that the piping and fabric remain secure.
Sew the piping in place in a zigzag stitch, making sure you are stitching along the edge of the piping and not through the middle.
Now, you can pin the outside pieces of the fabric together with the right sides of the fabric facing each other. Sew the pieces together, but make sure you leave roughly four inches open at one end. This is where the zipper will be inserted.
Next, insert your zipper face down with the prongs of the zipper facing away from the fabric. Pin the zipper down and stitch a 1/4 inch seam along each side of the zipper. Then, finish sewing along the open side, sewing over top of the zipper.
Unzip the zipper approximately halfway and then turn the pillowcase right-side out.
Finish off the pillow by giving it one last press and stuffing the insert inside. ZIP it up, and you have your new zippered pillow with piping!
How do you put piping on a pillow cover?
To put piping on a pillow cover, you will need to gather the necessary supplies, which are fabric for the cover, fabric for the piping, piping cord and a zipper foot attachment. Start by measuring and cutting the fabric for both the cover and the piping.
You will then need to make a small tube out of the fabric for the piping. To do this, place the right sides of the fabric together and sew the two long edges together using a 1/4″ seam allowance. Once the tube is closed, it will need to be pressed flat.
Next, thread the piping cord into the fabric tube. You may want to use a zipper foot on your sewing machine to help with this step. When you are finished, it is time to attach the piping to the pillow cover by placing the raw edges together.
Line up the piping so that the cord is in the middle, pinned in place with the piping facing the wrong side of the pillow cover. Sew the edges together, stitching just close to the cord. Once the piping is sewn in place, your pillow cover should be finished.
Can you add piping to a pillow?
Yes, you can certainly add piping to a pillow. Adding piping to a pillow is a simple and easy way to add extra detail and style to your project. It will help give the pillow a more finished look as well as add texture and dimension.
To add piping to a pillow, start by cutting a length of piping fabric that is slightly longer than the circumference of the pillow plus seam allowance. Then, fold the fabric in half lengthwise, with the right side of the fabric facing inwards.
Stitch along the length of the folded fabric and turn the piping right side out. Finally, pin the piping to the edge of the pillow and stitch in place, making sure to catch both the edge of the pillow and the piping.
How do you attach piping?
Attaching piping to a system is an important plumbing procedure that must be done properly to ensure the system is up to code and will work correctly. There are several different techniques for attaching piping that depend on the type of material being piped, the part being joined and other factors.
Generally speaking, the following steps are involved:
1. Measure and cut the piping to the correct length, depending on the application.
2. File the cut end of the pipe if needed and mark the location where the parts will be joined.
3. Slide a ferrule and/or sleeve over the cut end of the pipe. A ferrule is a short pipe fitting that helps to create a gas or liquid tight seal at the pipe joint.
4. Place the pipe end in the coupling or fitting, lining up any notches or threads.
5. Secure the pipe in the fitting using a pipe wrench and clamping the ferrule firmly in place.
6. Test the pipe joint by filling the system with water or other testing agent and looking for air or water leaks.
7. Tighten the pipe joint further if any leaks are found.
When attaching piping, it is important to use caution and follow all instructions at each step. If doing a complex plumbing project involving PVC or metal piping, then the help of a professional may be needed.
How do you pipe edge a cushion?
Piping edge a cushion is a great way to add a bit of style and character to an otherwise plain cushion! The process itself is simple and only requires a few tools. First, you must determine the size of the piping before cutting it.
Generally, the piping should be cut so that it is equal in length to the circumference of the cushion, or twice the height if you’re going for a roll-style cushion. Next, the piping must be sewn onto the cushion’s surface by hand or machine.
Once sewn on, the cushion can be filled with the desired stuffing, either loose or pre-stuffed. The piping should then be weighted down gently to ensure that it stays in place before being secured with slipstitches.
When done correctly, you now have a stylish and professionally finished cushion that is sure to be a conversation starter!.
Is piping necessary on cushions?
Piping on cushions is not strictly necessary. Piping is an extra design element that can be added to cushions to make them look more formal or polished. It can also add visual interest and be used to highlight certain parts of the design.
For example, you could add piping around the edges of the cushion to help it stand out and add texture. Additionally, piping can reinforce seams and help prevent tearing and fraying of the fabric due to rough handling.
Ultimately, it is a matter of personal style and preference. If you like the look of piping, it is a great way to dress up your cushions.
What size cording is used for pillows?
The size of cording used for pillows varies, depending on the look and design that you are trying to achieve. Generally, most pillows use 1/4-inch cording. If a more tailored or professional look is desired, 1/8-inch cording is often used.
For decorative accents or added texture, thicker cording such as 1/2-inch or 3/4-inch may be used. When purchasing cording for pillows, it is best to choose a durable material such as cotton, polyester, leather, or suede.
No matter what size cording you choose, all seams should be reinforced to ensure that the pillow is durable and built to last.
What size pillow insert should I buy for a 20×20 cover?
When purchasing a pillow insert for a 20×20 cover, it is important to find the right size to ensure a full and snug fit. Generally, a 20×20 pillow insert should be 22×22 inches in size. Anything larger than this is likely to cause the pillow to appear too full and overstuffed, while anything smaller will create a baggy, wrinkled appearance.
It is also important to choose the correct pillow fill, as different types of material such as synthetic, down or feather can have varying effects on the appearance of the pillow. Additionally, some inserts will state the size of the cover required for the pillow, so make sure that you double-check both the cover and insert size for accuracy before making a purchase.
How much should an envelope pillow overlap?
When making an envelope pillow, the amount of overlap is a personal preference; however, most people use a 1/2 to 1 inch overlap. First, lay the back fabric on a flat surface with the pattern facing outwards, then place the front piece of fabric on top with the pattern also facing outwards.
You will then overlap the two pieces of fabric by 1/2 to 1 inch. Depending on the size of your pillow, you may need to overlap the fabric more to ensure it will have the desired fit. To make sure the overlap is even, you can use a ruler or measuring tape to measure the desired amount of overlap.
Afterwards, you can sew or pin the fabrics together. When deciding how much to overlap the fabric, keep in mind that the fabric will shrink a bit when it’s washed. Make sure to leave extra space above the desired overlap to ensure the pillow will fit once it’s been washed.
How do you make an envelope pillow?
Making an envelope pillow is a great way to add a decorative touch to your home décor while also creating a comfortable and soft spot to relax. Here’s how to make one:
1. Gather your materials: fabric, thread, a sewing machine, and scissors.
2. Measure the fabric you’ll need for the pillow. You’ll need two pieces of equal size for the front and back. If you’re using a finished fabric, you’ll need an extra half-inch or so for seam allowances.
3. Sew the fabric pieces together with the wrong side facing inward, leaving a small gap at one end.
4. Turn the fabric right-side out, then hand-sew the gap closed.
5. Create the envelope opening by folding the ends of the fabric inwards and stitching along the edge of the fabric to hold it in place.
6. Stuff the pillow with batting or fibrefill, and manually form it into the desired shape.
7. Hand-stitch the opening closed when you’re finished filling it, and voila! Your envelope pillow is ready to decorate your home.
What is an envelope closure of pillow?
An envelope closure of a pillow is a method of closure for a pillow, whereby two flaps of fabric are overlapped along one side in order to secure the pillow surface. It is a popular closure option for bedding, sofa cushions and throw pillows, and it offers a crisp, finished look with a streamlined style.
To construct an envelope closure, fabric is typically first cut in the shape of the pillow, with one side left open to form the envelope. Then one flap of the open end is overlapped over the other flap and the edges are either sewn together or held in place with fabric glue, snaps or Velcro.
This closure hides any stuffing or foam inserts, while also keeping the pillow’s form and shape intact. Envelope closures are also easy to open, allowing for convenient removal and replacement of pillow inserts.