The cost of a double fence gate varies depending on the material it’s made from, size, and any additional features. Generally, wooden gates can range anywhere from $125 to over $2,000, while aluminum gates can start around $150 and go up to $3,000 or more.
Vinyl gates start around $300 and can go up to $4,000 or more. Steel gates usually start around $350 and can cost up to $4,500 or more for a pre-made one. Depending on the size, special materials and coatings, as well as any additional features, the price of the gate will go up.
For a basic double gate, expect to pay at least $500.
How much does it cost to put up a gate?
The cost of putting up a gate varies greatly depending on the type of gate, the materials used, and the size and complexity of the job. Generally speaking, a basic metal gate can range anywhere from $60 to $180, while a more ornamental metal item might cost anywhere from $150 to $1,200.
Wooden gates can range anywhere between $50 and $500, while a custom wrought iron gate may start at around $1,500 and go up to $10,000 or more. Installation costs can range anywhere from $75 to $500, depending on the type of gate, the complexity of the job, and the labor costs in your area.
Generally speaking, the larger, more complex, and more ornamental a gate is, the more it will cost.
How do you build a double wooden gate?
Building a double wooden gate can be a relatively straightforward job, but there are several steps you must follow to ensure the job is done safely and securely. You’ll need the following materials for the job: 4×4 wooden posts, 2×4 framing boards, 1×4 boards, adjustable hinges, and weather resistant screws.
1. Start by setting two wooden posts into the ground that will support the double gate. Dig two post holes on either side of the opening, making sure that they are at least three feet apart. Place the posts inside the post holes and pack dirt around them to keep them secure.
You may want to use gravel for additional support.
2. To help prevent warping, make sure the framing boards that will be used to construct the gate’s frame are made of treated wood. Use a combination of 2x4s and 1x4s to create the frame. Make sure the frame is durable and secure.
3. Once your frame is complete, use weather resistant screws to attach it to the 4×4 posts, beginning with the top rail. Make sure all the screws are firmly in place and tighten them, then attach the remaining rails on the frame.
4. Now it’s time to attach the hinges. Take one of the hinges and line it up with the edge of the gate. Predrill two holes then attach the hinge to the gate using weather resistant screws. Secure the other side of the hinge onto the post with screws.
You can use a pair of adjustable hinges if the opening is not quite the correct length for one hinge.
5. Finally, add a latch to the top post to hold the gate closed. Once all of your materials are secure, your double wooden gate is complete.
What is the standard size of a double gate?
The standard size of a double gate depends on the purpose of the gate and the available space where it will be installed. In general, double gates can range anywhere from 3 feet to 12 feet wide and 4 feet to 6 feet tall.
However, double gates come in a variety of sizes, and it is important to factor in specific dimensions for both the gate’s opening and the space it needs to swing in order to determine an appropriate size for any given installation.
The size of the available area should also be taken into consideration, as the gap between the gate opening and the boundaries of the area can affect the clearance of the gate when it is in use.
Which gate is better sliding or swing?
The type of gate you should use depends on a few factors. Sliding gates are excellent for places where space is limited, such as narrow driveways. They don’t require any room for the gate to swing open.
However, sliding gates can be difficult to manage and are prone to jamming if not installed properly.
Swing gates are better for larger spaces, as they allow for a wider opening and smoother operation. They are great for added security as well, since a swinging gate opens inward and is less likely to be tampered with.
Swing gates are also easier to maintain than sliding gates, and require less frequent servicing.
Considering the size of the area and the specific needs of your property, either a sliding or swing gate can be a great choice. However, swing gates provide the optimal security, convenience, and durability for most residential and commercial properties.
How wide is standard gate?
The width of a standard gate typically varies depending on the type of gate it is and its purpose. For most residential wood gates, the typical width is between 3 to 5 feet. Garden gates are typically around 4 feet in width, whereas driveway gates can range from 8 to 10 feet in width.
Depending on the gate’s use, gate widths can even go up to 20 feet. Additionally, custom gates can be built to fit any width.
The spacing between pickets on a gate will generally affect the overall width of the gate. Single swing gates usually have picket spacing of 2 to 6 inches and double swing gates usually have picket spacing of 3 to 8 inches.
How much gap do you need between double gates?
The spacing between double gates is dependent on the specific situation. In most residential and urban areas, typically the gap between the two gates should be between three and five feet, allowing ample room for easy movement of people and vehicles.
The gap between the gate should also be wide enough to accommodate larger items, such as furniture or a wheelchair, and should also accommodate any additional yard obstacles, such as trees, bushes, or other terrain features.
The gap between the two gates should also leave enough room for children to access the space in between them. Ultimately, the width between the double gates should be determined based on the needs of the people and objects needing to pass through them.
How do you make a gate open both ways?
To make a gate open both ways, you can use an automated gate opener or open the gate by hand. If using an automated gate opener, you would need to purchase an opener and any necessary accessories, such as a solar panel, prior to installation.
If you are installing the gate opener yourself it will take some time and effort to ensure that it is done correctly and safely.
When installing the gate opener firstly you will need to fit the frame of the gate and fit the cogs, hinges and other hardware pieces necessary to make the door open both ways. It is important to ensure the gate is level as this will make the opener work as required.
After this install the motor/ motor actuator, depending on which type of opener you have, and any safety devices you have.
The final step is to connect the opener to power sources, these can be mains powered, battery powered or powered using solar panels. Once the power is connected the gate is ready to be opened and closed.
In addition to automated gates you can also install a simple chain and latch or slide bolt system which, when installed correctly, will allow the gate to swing in both directions.
How do I stop my double gates from rattling?
To stop your double gates from rattling, you should first identify the source of the problem. Usually, the gate is either too heavy for its hinges or the hinges need to be adjusted or replaced. Check the gate for excess weight and check the hinges for wear and tear.
If the hinges are loose, tighten them with a wrench or other tool. If the hinges are corroded or worn, you may need to replace them.
If the issue is a gap between the two gates, you should use a block of wood to fill the gap and secure the gates together. You can either screw or glue the wood block into position.
Finally, you can use weather-stripping or garage door sealant tape to seal gaps and openings between the two gates. This will prevent wind and other elements from getting between the two gates and rattling them.
Once you’ve determined the source of the problem and addressed it, your double gates should no longer be rattling.
How can I make my gate close quietly?
First, check to make sure the hinges are properly oiled and functioning correctly. If they are not, then lubricate them with a multipurpose oil or WD-40, as this will help to reduce the noise. Be sure to wipe any excess away afterwards.
You could also look at adding some kind of sound dampening material to the gate itself. The material should be slightly resistant and thick enough to absorb some of the vibration that would otherwise come out as noise.
Consider adding items like foam, rubber bumpers, or any weather strips that are designed for sound insulation.
Finally, consider replacing the gate with a quieter model. Different gates come with different materials and constructions, so it may be worth researching some different options that are specifically designed to minimize noise.