The exact weight of a light weed eater will depend on the make and model, but most models tend to range in weight from 8 to 10 lbs. A light weed eater is generally a corded electric model, which provides less power than a gas-powered model, but is better for smaller yards, given that electric models are typically quieter and don’t require having to buy and store gas.
For larger yards, a gas-powered model may be more efficient, given that they have more power and are able to tackle tougher weeds and grasses.
What is the easiest weed wacker to use?
When looking for an easy-to-use weed wacker, it’s important to look for one that is lightweight and comfortable to use, has a good balance and offers adjustable speeds. The key to finding an easy-to-use weed wacker is to determine which features are most important for your particular needs.
A great starter weed wacker for someone just starting out is a battery-powered weed wacker. Many of these models are powerful enough to handle light to moderate weed-removal tasks, yet lightweight enough to maneuver around easily.
They usually come with adjustable cutting heights, so you can easily trim the length of your grass. Additionally, battery-powered weed wackers won’t run through the strings of your yard like gas-powered models do.
Corded-electric models of weed wackers are also relatively easy to use, since they require less maintenance than gas-powered ones. This type of weed wacker also provides more power and better performance than battery-powered models.
However, the length of extension cords can become cumbersome and can limit the range of movement.
If you need a more powerful model that can handle tougher weed wacking jobs, a gas-powered weed wacker may be the best option. These models offer more power and better performance, but they can be noisy and require regular maintenance.
Plus, they are heavier and not as easy to maneuver around.
No matter which weed wacker you choose, it is essential to read the manufacturer’s instructions, as well as safety guidelines, to ensure proper usage and safety. With the right model, any yard-care task can become easier.
Who makes Featherlite weed eater?
Featherlite weed eaters are designed and manufactured by Husqvarna, a global leader in outdoor power tools. Husqvarna was founded in 1689 in Sweden and has been producing outdoor power tools for over 325 years.
The Featherlite weed eaters are designed to make lawn care easier and more efficient. The trimmers are lightweight and come equipped with quality, commercial grade engines and anti-vibration systems.
These features help make them easier to operate and keep them running smoothly. Additionally, they come with a variety of attachments that make it easier to take care of any size yard or garden. The Featherlite weed eaters also come with a two-year manufacturer’s warranty.
Is Weed Eater made by Poulan?
Yes, Weed Eater is manufactured by Poulan. Poulan is a well-known manufacturer of outdoor power equipment, established in 1944 and based in McDonough, Georgia. Among their products is Weed Eater, one of the most popular brands of string trimmers and edgers for residential and commercial use.
Weed Eater offers many models of these equipment, from small electric models to powerful gas-powered ones. All of their products are made with the highest standards of quality and are backed by a strong warranty.
Weed Eater products are available through authorized dealers, retail stores, and online.
Who makes Homelite string trimmers?
Homelite string trimmers are made by the Homelite Corporation, a power tool and outdoor equipment manufacturing company that is part of the Techtronic Industries family of brands. Founded in 1921, Homelite originally specialized in making small electric motors, generators, pressure washers, and saws.
From these beginnings, the company has expanded its product line to include a wide variety of string trimmers, blowers, chain saws, and pumps. Homelite string trimmers are available in both gas and electric models, and offer a range of features that make them ideal for residential, commercial, and industrial lawn care applications.
Homelite is committed to providing high quality tools, reliable parts, and exceptional customer service, so you can trust their string trimmers for years of trouble-free use.
How do you restring a Featherlite Weed Eater?
Restringing a Featherlite Weed Eater requires a few simple steps. First, clear away any debris around the string head and then locate the string head on the shaft. Grip the string head and gently pull it away from the shaft to remove it and then remove the old string.
To install the new string, remove the spool of string from its packaging and cut off 8 to 10 feet depending on the model. Thread the string through the eyelets on the spool and then insert the spool back into the string head.
Feed the string out of the string head and then press the trigger to let the string to come out of the string head. Then, slowly wind the string around the pins, making sure the strings don’t overlap and while keeping it a little taut.
When the spool is full, leave 3 inches of string exposed and tie it onto the empty notch on the side of the spool. Lastly, press the trigger to rewind the extra 3-inches of string and then reattach the string head back on the shaft.
How do you change the primer bulb on a Weed Eater sst25ce?
Changing the primer bulb on a Weed Eater SST25ce is a relatively easy process that can be accomplished by taking the following steps:
1. Shut off fuel valve and turn off the engine.
2. Remove the air filter cover to gain access to the primer bulb.
3. Unscrew the primer bulb from the engine and discard.
4. Using a clean rag, wipe out the fuel intake port to clean any debris.
5. Insert the new primer bulb into the engine’s fuel intake port.
6. Ensure that the primer bulb is tightly secured in the engine’s fuel intake port.
7. Reconnect the air filter cover and tighten the screws to secure the cover.
8. Start the engine and check for leaks or any signs of malfunction.
9. If the engine is working properly, turn off the engine, open the fuel valve, and tighten all the connections.
Where is the spark plug on a Weed Eater?
The spark plug on a Weed Eater is typically located at the top of the engine. You will usually find it by removing the plastic cover off the top of the engine from the operator handle back. Once you have the cover off the engine, you may have to remove additional parts such as the air filter in order to see the spark plug.
The spark plug is usually a metal cylinder with a threaded hole in the center and two metal wires attached to it. Carefully unscrew the spark plug using the appropriate spark plug wrench and remove it from the engine.
How can you tell when a spark plug is bad?
You can tell when a spark plug is bad by inspecting it. If it is covered in oil or black residue, then it is likely that the spark plug is bad. Additionally, you can check whether the spark plug is sparking properly.
To do this, remove the plug from the engine and inspect the sparking action created by the side gap between the electrodes. If it is weak or non-existent, then it indicates the sparkplug is bad and should be replaced.
Other signs of a bad spark plug include intermittent misfires, rough idling or stalling, and increased fuel consumption. If these issues are present, then it is likely that the spark plug needs to be replaced.
How do you check spark plugs without removing them?
You can check spark plugs without removing them by using a spark plug tester. This device helps diagnose ignition problems and tests whether spark plugs are in good condition or not. It works by simulating the spark plug’s firing process and then checking whether adequate sparking is occurring.
To use it, firstly connect the spark plug wire to the tester and then set the tester’s voltage regulator to match the spark plugs’ rating, usually around 12 volts. Once connected and powered, the tester should light up, indicating that a spark is present and your spark plugs are working correctly.
If no light is present, however, it may be a sign that there is a problem and the plugs may need to be replaced.
What tool is for removing spark plugs?
A spark plug socket is the 3-sided tool designed for removing spark plugs. It has an opening at the top that fits around the spark plug, enabling it to grip the spark plug and unscrew it from the engine.
It has an integrated rubber end that allows a strong grip on the spark plug and prevents it from slipping when in use. It also is specially designed with a rubber coating to keep debris and debris created when removing spark plugs from entering the spark plug hole.
If a spark plug socket is not available, an adjustable wrench can be used as a substitute. However, this is considered an unsafe method due to the possibility of damaging the spark plug or the threaded spark plug hole.
How much does a STIHL 131 weigh?
The STIHL MS 131 chainsaw weighs 7.1 kilograms (15.65 lb. ) without fuel, the F or farm model weighs 8.1 kilograms (17.86 lb. ) without fuel. This weight includes the bar and chain, as well as other standard components, but not the fuel.
It is a relatively lightweight saw, though the weight can vary greatly depending on the powerhead, bar and chain combination chosen.
What is the lightest weight Stihl weed eater?
The Stihl FSE 60 electric trimmer is the lightest weight Stihl weed eater. This trimmer weighs just 6.6 lbs, making it a great choice for users who are looking for a lightweight option. It features a 240-watt electric motor and a 15-inch cutting swath.
The cutting head is dual line and the trimmer has an adjustable support handle for increased comfort. This trimmer is compatible with line diameters ranging from 1.5 – 4 mm and the line can be refilled in a matter of seconds.
It also features a loop handle and activity switch, making it easier to control and use. Overall, this trimmer is an ideal option for users who value a lightweight machine that will still get the job done.
Who makes Weed Eater brand?
Weed Eater is a brand of garden tools designed specifically for lawn care and maintenance. The brand was created and is owned by Husqvarna, a Swedish company that produces outdoor power equipment. Husqvarna also owns the brand Poulan, which features compatible Weed Eater accessories and replacement parts.
The Weed Eater brand includes products ranging from lightweight string trimmers to high-powered walk-behind mowers and powered hedge trimmers. Weed Eater products are sold at various retailers and dealers worldwide, and are renowned for their dependable and economical performance.
Where are Stihl weed eaters made?
Stihl weed eaters are made in several countries across the world. The majority of their equipment is made in Germany, though other equipment, such as leaf blowers, are made in China. Some of their more specialized equipment is even made in the United States.
Additionally, Stihl also assembles and distributes products from plants around the world, including the United States, as well as branches and subsidiaries in Europe, Africa, and South America.
How do you change a Craftsman trimmer line?
Changing a Craftsman trimmer line requires a few tools and a bit of knowledge. First, turn off the trimmer and disconnect the spark plug wire to avoid any accidental start-up. Next, use the correct size spanner wrench to loosen the cutting head.
Carefully remove the old line and dispose of it safely. Some Craftsman trimmer models require a shim for the spool, so make sure this is in place before adding new line. Use the same spool for the new line.
Refer to your owner’s manual to determine the line size and thread direction. Usually, the line should be inserted into the spool from the inside and then wound in the correct direction (usually from the center out).
Securely insert the line into the eyelet before winding. String trimmers use two types of line, square and round. According to the manual, the design of the cutting head will determine the type of line to be used.
Once the line is wound, reinstall the cutting head and tighten the spanner wrench. Finally, reattach the spark plug wire, and start the trimmer.
What kind of spark plug does a Craftsman weed eater take?
The type of spark plug that a Craftsman weed eater takes depends on the specific model. Generally, the Craftsman trimmers and weed eaters come with either a Champion RCJ6Y or an NGK BPMR7A spark plug.
It is important to refer to the owner’s manual for your specific model to determine the correct spark plug. Additionally, it’s best to double-check the spark plug type prior to purchasing one so as to avoid purchasing the incorrect plug.
If you’re unable to find the spark plug type in your owner’s manual, you can also find the type on the engine itself.
How do you fill a craftsman weed wacker?
To fill a craftsman weed wacker with fuel, you will need to gather the necessary materials. Begin by gathering fuel, an oil-fuel mix (or straight fuel, depending on the type of wacker you have), and a high-quality funnel.
Next, locate your fuel tank and unscrew the lid. Place the funnel over the gas tank opening, then pour the fuel and oil mixture into the tank with the funnel. Fill it just below the “FULL LINE” on the fuel tank.
Once the fuel is full, take the lid off the funnel and place it back on the tank. Screw the lid back on tight, and you are now ready to go. Be sure to use the same specifications for fuel each time you fill the tank, as using the wrong type of fuel can damage your weed wacker in the long run.