The amount of fabric needed for a balloon shade will depend on the size and shape of the window, as well as the size of the shade. Generally, fabric for balloon shades is sold in 54 inch widths, although some specialty fabrics may have different widths.
Before ordering fabric, measure the width and length of the window opening and determine how wide the shade should be when gathered. Multiply the width of the shade by the length of the window to determine the minimum amount of fabric needed.
This number should be doubled to allow for gathers.
For example, if the window is 30 inches wide, and the shade is to be gathered at 36 inches, multiply 30 inches by the length (in inches) of the window and double the result as follows:
30 x Length of Window = X
X x 2 = Y
In this case, if the length of the window is 72 inches, Y would equal 3600, which tells you that you’ll need at least 3600 inches (or 30 yards) of 54 inch wide fabric for your balloon shade.
How do you hang balloon curtains?
To hang balloon curtains, you will need to gather your tools and materials. You will need a drill, a measuring tape, screws, and a stud finder. You will also need the necessary curtain rods, brackets, and finials.
Additionally, you will need your balloon curtains.
The first step involves locating the wall studs where you will be attaching the rods. You can use a stud finder to make sure that you are drilling into the right spot to ensure that your curtain rods are securely held in place.
It is important to note that standard curtain rods should, ideally, be positioned 3 to 6 inches above a window frame, while floor-length curtains should be mounted between 4 and 8 inches.
The next step is to measure the width of your window and then to cut the necessary curtain rods. Use the drill to attach the brackets to the wall, making sure that the screws are securely fastened. Once the correct size of the curtain rod is measured, the next step is to attach the finials to the ends of the curtain rods.
Lastly, the balloon curtains have to be hung up. Put the top rod through the top of the curtain fabric, allowing it to pass through the pocket on the other side. Pull the fabric through the pocket until the lower edges of the fabric touch the window sill.
Make sure that the pocket casing is on the inside of the window frame. Once the rod and fabric is attached, adjust the length of the curtains, if needed. When the desired length is reached, just fasten the pins and voila you have hung your balloon curtains!.
What is a balloon drape?
A balloon drape is a type of window treatment that consists of a single panel of fabric, with a gathered and draped section at the bottom. The drape typically has a valance at the top to hide the drapery rod or hardware, and it’s designed to give a room a softened and more romantic feel.
Balloon draperies are not just decorative, they can be used to provide privacy and light control as well, by creating a tighter closure at the sides or center of the window. They come in a variety of colors and fabrics, so you can easily find a style that will match your décor.
Balloon draperies can also be customized, so they can be tailored to fit any window size.
How do you make puffy valances?
Making puffy valances is an easy do-it-yourself project, and it’s an ideal way to give a room an instant makeover. Here’s how you can make them:
1. Start by buying enough fabric to cover the window. Take measurements of the window and the desired drop for the valance. Allow for two to three inches of extra in the length and width when you purchase the fabric.
2. Hem the edges of the fabric. Do this by turning the edge of the fabric up and ironing it. Then sew it with a straight stitch, and trim off any excess fabric.
3. Next, draw a line near the top of the fabric that runs the width of the fabric. This will be used to gather the fabric. Make sure that the line is thick enough to create fullness in the valance.
4. Stitch along the gathered line and make sure your stitches are even. Do this at least three times, so that the gathering is secure.
5. Attach the valance to the top or window frame using screws or other hardware. You can also use a decorative rod or hook to hang the valance.
6. Finally, adjust the poufs for a finished look. Fluff and tie off the poufs as desired. You can make the poufs smaller or bigger for a unique effect.
Follow these steps and you’ll have a beautiful puffy valance in no time. Have fun creating and enjoy the new look you’ll get!
What are window balloon shades?
Window balloon shades are a type of window covering that are designed to diffuse sunlight and provide a decorative touch to any room. Featuring an elegant gathered, folding look, window balloon shades are a popular choice for many window designs and treatments.
Balloon shades are usually made from lightweight, sheer fabrics that gather at the top in multiple ruffles, like a cluster of balloons. This design provides a layered look that offers a degree of dimension and privacy to the home.
As a decorative element, window balloon shades can be combined with other coverings such as drapes or blinds to provide a more elaborate look. Whether you decide to hang them up alone, or combine with other window treatments, window balloon shades can help create a lovely and cozy atmosphere for any home.
What kind of fabric do you use for Roman shades?
Roman shades are window treatments that use a single piece of fabric, rather than individual hanging panels. The fabric used in Roman shades are typically made from highly durable, light-filtering materials such as cotton, linen, polyester, and roller cloth.
Many natural fabrics, such as cotton and linen, come in various colors and textures, allowing for more creative control in creating a unique and personalized look in any room. Synthetic materials, such as polyester and roller cloth, are also lightweight, easy to clean, and come in a variety of colors as well.
While natural fabrics such as cotton have a tendency to wrinkle over time, most synthetic materials hold up well and remain wrinkle-free. Other popular materials used for Roman shades include faux and woven woods, or fabric blended with wood.
These materials are popular because they offer a sleek and modern look while lending a bit of warmth to a space.
Can you hang Roman shades on a curtain rod?
Yes, Roman shades can be hung on a curtain rod. Many people choose to hang Roman shades on a curtain rod for the classic look of a drape, with the added benefit of the control that comes with a shade.
Installing Roman shades takes a bit more time and effort than a simple curtain, but it is worth it. The process involves measuring your window and cutting the shade fabric to size, then heming the edges and inserting a wooden frame covered with the same fabric as the shade.
The frame of the shade can then be attached to the curtain rod with brackets. In the end, the result is an elegant and stylish window treatment that provides both privacy and light control.
Is it easy to make Roman blinds?
Making Roman blinds is relatively easy if you already have the fabric and all the necessary supplies. Begin by gathering all the materials you need, including fabric, lining, doweling, rings, weights, and hemming tape.
Next, you need to measure and then cut the fabric to the desired size. Sew the lining onto the back of the fabric, then sew the top and bottom hems. Sew the sides together, then add doweling and weights in the seams on each side.
Sew on the rings and attach the lift cords. Lastly, you’ll need to attach the hemming tape along the sides and bottom to secure the blind. With a bit of practice and patience, you can make your own stylish Roman blinds in a few easy steps.
How can I cover my windows cheaply?
Covering your windows cheaply can be done in several ways. One easy, inexpensive option is to hang a sheer curtain for a light, decorative touch, such as voile or lace. If you’d prefer more privacy, you could use a heavyweight curtain like a velvet or other textured fabric, mounting it on the wall with a tension rod.
If you’d like an even more permanent option, you could install shades or blinds in the window. Vinyl blinds or faux wood styles are available, and these can provide enough shade to give you the privacy you want.
Additional options like tinting the window or applying window film can also help keep your space private. All of these options are relatively inexpensive, so you should be able to find something to suit your needs.
How can I make my windows look good without curtains?
If you want to make your windows look good without curtains, there are a few options you can consider. You can first consider adding some blinds or shades. Shutters are also an option that can offer some privacy and help keep light out when needed.
Another option is to add privacy window film that adheres directly to the glass. This type of film can come in a variety of patterns, designs, and even colors. You can also create the look of curtains without actually hanging fabric by hanging decorative rods with finials from your window.
You can wrap a sheer material around the rods, which will also help let in natural light. There are also many other decor accessories that you can use to embellish your window frames such as wall stickers, hanging plants, and potted plants.
So, you have many different options to choose from to make your windows look good without curtains.
What can I put on my window instead of curtains?
In addition to curtains, there are several other options you can consider for window treatments. Sheer panels, blinds, shades, shutters, and valances can often give a similar effect to curtains while providing a unique look to the space.
Sheer panels are great for allowing light to filter in while maintaining privacy in the room. Blinds and shades come in both manual and motorized options, and are available in a variety of colors, styles, and materials.
Shutters come in wood or faux wood options, which allow you to block the light while adding a classic look to the window. Finally, valances can be used as a lighter option to curtains, and are often hung alone or in conjunction with another window covering.
How do you make a simple window topper?
Making a simple window topper is relatively easy and can be done with a few basic tools and supplies. Most simple window toppers can be made with minimal sewing, so if you don’t have a sewing machine or much experience with sewing, this is a great project for you! Here’s what you’ll need:
-Fabric of your choice
-Scissors
-Tape measure
-Tacks or mounting hardware
-Iron
Begin by measuring your window to determine the size of your topper. You’ll need to add an extra 4-6 inches to the width and height of the window to allow for pleating. Cut your fabric to the desired size, and then press it flat with the iron.
Fold each edge over 1/4 inch and press again, to hem the edges and prevent them from fraying.
Now, make small pleats along the bottom edge, folding each pleat inward as you work your way across the fabric. Pin each pleat in place with straight pins and then sew along the hem to hold the pleats in place.
Take the fabric to the window and attach it to the top of the window frame. Use tacks or a mounting system of your choice in order to secure the top of the fabric to the window frame.
You’re now ready to enjoy your new window topper! A simple window topper is a great way to add an extra touch of charm and warmth to any room in your home.
What is a cornice window treatment?
A cornice window treatment is typically a decorative wood-framed cover for a window. It is typically wider than the window itself, typically projecting out from the wall by around 6-12 inches. Cornices often have a squared, or sometimes rounded, design on top, as well as a fabric board in the center of the frame.
The fabric board can either be a single solid colour, or a patterned or textured material which can serve as the backdrop for creative designs and colour combinations. The cornice is generally mounted to the wall above the window and the fabric is either custom-made or can be cut and trimmed to the desired size and shape.
Cornices are an excellent way to provide windows with a finished, decorative look, while also providing privacy and shading.
How do you make a valance out of foam board?
Making a valance out of foam board is a simple and affordable way to enhance the look of your windows and home. To begin, measure the length and width of your window, then use your measurements to cut the foam board to the desired size (you may want to cut the board 1-2 inches longer than the window).
Once the board is cut, add adhesive to the back of the foam board and attach it to the wall or window trim in the desired location. Make sure that the foam board is securely attached before you move on to the next step.
Next, add a layer of batting or foam for added softness and dimension. Cut the batting or foam to the same size as the foam board you just attached and adhere it with spray adhesive. Finally, cover the foam board in material of your choice—sheet fabric, drapery fabric, or even upholstery fabric work great.
Simply place your fabric over the board and batting and staple it in place using an upholstery stapler. You may want to pull the fabric taut and trim away fabric that hangs over the edge. Then, stand back and enjoy your beautiful, custom-made valance!.
What is an Austrian shade?
An Austrian shade is a type of soft-pleated window covering that is often referred to as “romantic window treatment” because of its draped and layered silhouette. It features panels that are made of fabric and draped onto a horizontal track or rod suspended from the top of a window; the fabric panels can be opened and closed as you wish.
Austrian shades are typically used as a privacy and light-filtering solution, as well as for decorative purposes. They can be made with a variety of fabrics, including sheer and blackout fabrics, allowing for a diverse selection.
When opened, Austrian shades create a beautiful draped look that allows for soft light to enter the room. Additionally, the shades offer great insulation properties, helping to maintain consistent temperatures in the home.