When it comes to inside mount shades, you will need approximately 3/8” to1/2” of flat surface space at the top and the sides of the window opening in order for the shade to fit properly. In addition, you should also plan for at least 3” in the back of the window opening, in order for the mounting bracket to fit and work properly.
Make sure to measure twice, as even fractions of an inch matter in order for your shade to fit correctly in the window opening. Also, keep in mind that many wooden or faux wood blinds use a minimum 2 1/2” wall depth.
Lastly, you should always allow an additional 2 1/2” in the window opening for maximum light control. This will ensure that your shades will be able to cover the entire window opening and provide maximum light protection and privacy.
How much space on each side of inside mount blinds?
When hanging inside-mount blinds, it is important to properly measure the window so that there is enough space on each side for the blinds to fit. The amount of space depends on the type of blinds you are installing.
For most inside-mount blinds, a minimum of 1 1/2 inches of space is required on each side of the window frame. The guides that come with the blinds will provide specific instructions regarding the exact measurements required.
Another factor to consider is that inside-mount blinds are generally more difficult to install than outside-mount blinds. Therefore, it is usually recommended to make the window opening slightly larger to allow for some extra space for easier installation.
How much smaller should blinds be than the window for inside mount?
When installing blinds for an inside mount, it is important to ensure that the blinds are properly sized so that they fit and work correctly. Generally, as a rule of thumb, the blinds should be 1/2 inch smaller than the width and height of the window.
For example, if the window is 36 inches wide, the blinds should be 35 1/2 inches wide. This allows for a secure, snug fit and provides space between the back of the blind and the window so that they don’t interfere with the window’s hardware.
Additionally, if the blinds are too long or wide, they may not be able to open and close smoothly and can interfere with other hardware components inside the window or wall itself. It is also important to ensure that the window frame is level and completely square as this can result in an inconsistent fit if it isn’t.
What size blinds for 35 inch window inside Mount?
When choosing the size of blinds for a 35 inch window inside mount, it is important to measure the width of the window opening and deduct 1/2 inch to allow the blinds to fit within the opening. Inside mounted blinds need to fit completely inside the window frame, so you want to make sure that the blinds you purchase are 1/2 inch smaller than the opening itself.
So for a 35 inch window, the ideal size of blinds would be 34.5 inches. Additionally, the length of the blinds should be two to four inches longer than the window opening to ensure complete coverage of the space around the window.
When measuring, you should take into account any obstructions such as protruding frame fixtures that may limit the size of the blinds.
How wide should interior mount blinds be?
The width of interior mount blinds will depend on the size of the window they are meant to cover. For example, if the window is 32 inches wide, the blinds should be at least 32 inches wide so that it can fully cover the window when closed.
If the blinds are less than the size of the window, it may not cover the window properly, creating gaps of light. Depending on the type of blinds, the width might also need to be adjusted to the height of the window.
Venetian blinds should be wider than the window by two inches at least, while other types of blinds may require less. It is recommended to measure the window and get blinds that are no fewer than an inch wider than the window, to ensure a complete and proper fit.
How do you measure honeycomb cells?
Measuring the number and size of honeycomb cells produced by a particular colony of bees is most commonly done by scraping both the sides of a comb and then counting the cells under a microscope or dissecting microscope.
Both top and bottom sides of the comb should be scraped because if not, the correct count of cells in each side won’t be accurately determined. It is important to note that the only cells that can be measured are those that are not sealed with wax, as sealed cells contain no honey and can’t be measured.
To get an accurate count, it is important to use two slides – one slide to scrape the top of the comb and one to scrape the bottom. By counting the number of cells in each slide, a running total can be created to measure the exact amount of honeycomb cells.
Additionally, measuring the size of the cells can also be done under a microscope, by looking at the length and width of the cells to estimate their size.
How are cellular shade sizes measured?
Cellular shades are sized using an accurate width and height measurement of the inside of your window frame. The width measurement should be taken at the top, middle, and bottom of the window, and rounded down to the nearest 1/8 of an inch (1/4 inch increments).
The height measurement should be taken from the top of the window frame to the window sill, and should also be rounded down to the nearest 1/8 of an inch. When ordering, use the smallest width measurement and the longest height measurement you took.
It’s important to double-check that your measurements are correct once you’ve finished so that you can order the correct size for a perfect fit. If you are uncertain about your measurements, you can contact a representative from the company from which you are ordering, and they will usually be able to provide guidance.
Are cellular and honeycomb shades the same?
No, cellular and honeycomb shades are not the same. Cellular shades, also known as honeycomb shades, are composed of single or double fabric panels that are pleated and connected by an internal support system that forms an accordion-like shape.
The pleats are filled with air pockets that help to insulate the shades and provide the room with increased energy efficiency. Honeycomb shades, on the other hand, are composed of several interlocking layers of blankets that are connected by a network of exposed webbing that form a honeycomb-shaped pattern.
While both shades types effectively reduce light and provide privacy, honeycomb shades are slightly less energy-efficient than cellular shades. Additionally, honeycomb shades usually have a greater selection of color and texture options and offer additional features, such as light filtering or blackout liners.
Do honeycomb blinds look cheap?
Honeycomb blinds can look either cheap or expensive depending on what type you purchase and how you maintain them. If you buy the less expensive option, the blinds may look cheap with fade or the fabric may cheapen over time.
If you invest in quality honeycomb blinds and you properly maintain them, they can look just as nice and much classier than any other type of blind. Good quality honeycomb blinds can even add a luxurious feel to a home.
Honeycomb blinds are also incredibly energy efficient and help keep rooms cool when the hot sun hits your windows. When taken care of, honeycomb blinds can be a stylish and helpful addition to your home.
Are honeycomb shades worth it?
Honeycomb shades are definitely worth it due to the range of benefits they offer. Not only are they stylish and available in various colors and textures, but they also provide insulation, protect furniture and floors from fading, reduce outside noise, and offer excellent light control.
Honeycomb shades are also energy efficient, creating an air pocket between the window and the room that keeps warm air inside, and cool air outside during both cold and warm months. They are a great value for the money, and offer long-lasting protection for your windows and interior furnishings.
Overall, honeycomb shades are a great choice for any home or office and provide long-term benefits that make them well worth the investment.
How much should honeycomb blinds cost?
The cost of honeycomb blinds can vary greatly depending on the size and type you choose, as well as the materials used to manufacture them. If you’re looking for basic, budget-friendly honeycomb blinds, you can usually find them for as little as $20-$30 per set.
More premium styles and sizes can be found for as much as $100 per set. High-end blinds with added features, like motorized control options, can cost upwards of $200 per set. Generally speaking, honeycomb blinds offer good value for the money, as they last longer and add an attractive and modern look to the home.
Prices for a single window can be reduced further when you factor in the fact that you can get bulk discounts if purchasing several blinds at once.
How long do honeycomb shades last?
Honeycomb shades can last a long time when well cared for, with proper cleaning and maintenance. They generally last around 3-5 years, although newer models of honeycomb shades often come with limited lifetime warranties.
Regular dusting and vacuuming will keep your honeycomb shades free of accumulated dust and dirt and lengthen their life. It’s also important to check honeycomb cords every 4 to 6 months to make sure they are in good condition.
If needed, make adjustments or replacements to ensure the cords do not break. Additionally, keep your honeycomb shade away from frequent direct sunlight in order to keep its colors bright for longer.
Which cellular shades are most energy efficient?
Cellular shades are a popular window covering option due to their durability, versatility, and energy efficiency. Cellular shades, also known as honeycomb shades, come in a wide range of fabrics and colors to suit any space.
When it comes to energy efficiency, it’s important to consider the air pockets (or cells) created in the fabric of cellular shades.
Double cell cellular shades are the most energy efficient because they feature a unique professional design with double layers of cells that work together to maximize light blocking and energy efficiency.
This type of shade features thicker layers of fabrics with two rows of pockets, or ‘cells’. These cells provide a unique thermal performance and help regulate temperatures within the home.
Other popular energy efficient cellular shades includes single cell shades and blackout shades. Single cell shades have just one layer of cells, which offer medium levels of insulation while still providing impressive light control.
Blackout cellular shades feature special backing that helps block out even more light from entering the space. These shades offer maximum privacy and light-blocking capability, and are great for bedrooms and theaters.
Overall, double cell cellular shades are the most energy efficient due to their unique double layer design, but consumers may want to consider other energy efficient options such as single cell shades and blackout shades to suit their specific needs.
What is the difference between cellular and honeycomb blinds?
Cellular blinds (sometimes referred to as honeycomb shades) use two layers of fabric to form honeycomb shaped pockets of air. The insulating air pockets trap hot and cold air, providing greater insulation and energy efficiency for the room.
Depending on the fabric chosen, cellular blinds can also provide a blackout effect, blocking out light, but allowing some visibility.
Honeycomb blinds, on the other hand, are composed of a single sheet of material that folds in an accordion-like fashion. Unlike cellular blinds, honeycomb blinds use magnets to keep the blind straight, providing a textured and angular look that many people prefer for both aesthetic and practical reasons.
Honeycomb blinds are often cheaper than cellular blinds and have a more efficient and horizontal fold. They provide more insulation than cellular blinds, though not nearly to the same degree. Additionally, honeycomb blinds are easier to operate and require less maintenance than cellular blinds.
What are the different types of cellular shades?
Cellular shades come in several different types, including single cell, double cell, or even triple cell styles. Single cell shades come as a single panel of fabric that form pleats when the window is opened or closed.
The double cell shade is made of two cells of fabric connected with a honeycomb shape that provides increased insulation from outside temperatures. The triple cell shades are made of three connected honeycomb pockets of air which provide even better insulation than the single or double cell styles.
Cellular shades can also come in light-filtering or blackout styles. Light-filtering cellular shades allow light to enter the room but provide some privacy from the outside. This type of cellular shade will enable the user to enjoy natural light while still providing some privacy.
However, if a completely dark room is desired then blackout cellular shades are necessary. These are typically made with a woven fabric that blocks out any light that tries to enter the room.
Finally, cellular shades come in a variety of colors and patterns that a user can choose from. Some cellular shades even come with a cordless lift option so that it is easy to raise and lower the shade without having to worry about cords that can be potentially dangerous for children and pets.
Ultimately, there are several different types of cellular shades to suit the needs and preferences of any user.
Can cellular shades be outside Mount?
Yes, cellular shades can be outside mounted. Cellular shades offer excellent insulation and protection from the elements when mounted on the outside of a window or door. The unique design of the fabric provides a tight air seal around the edges of the window or door, which helps keep out draughts and dirt.
Outside mounting also allows you to take advantage of the maximum light-blocking of cellular shades, since you can cover more area with the shade. Outside mounting is even more beneficial for windows and doors facing south or west, as the shades will provide much needed insulation from the sun’s heat and glare.
They also come with all the benefits of traditional cellular shades, such as additional insulation and an upscale look.
Can you mount blinds outside window frame?
Yes, you can mount blinds outside window frame. Depending on the type of blinds, this process can be very simple or slightly more involved. Wood and faux wood shutters can easily be mounted outside the window frames.
Venetian blinds can also be installed this way as long as they are equipped with the right mounting brackets. However, it’s important to remember that when mounting blinds outside window frames, they will obscure a portion of the glass, which could reduce the amount of natural light that enters the room.
Additionally, when installing the blinds, you must ensure the base of the blinds is securely anchored above the window frame to prevent any water damage. Ultimately, by mounting your blinds outside window frame, you can give your room a truly unique look; however, you should make sure you’ve considered all the pros and cons before making this type of installation.
Do outside mount blinds look good?
Yes, outside mount blinds can look very attractive in a home. Outside mount blinds are mounted on the outside of a window frame, giving the window a larger feel and making the blinds look more prominent.
This also helps to create a contemporary look as the blinds appear sleek and modern. Outside mount blinds are also a great way to allow more light into a room, keeping the atmosphere bright and cheerful.
The blinds can be chosen in a variety of styles, fabrics, and colors, allowing you to customize your interior design in a way that reflects your personal style. Outside mount blinds are an easy way to instantly upgrade the look of any room!.