Yes, 170 Nm of torque is generally considered a good level of torque for an impact driver. It is powerful enough to handle most heavy-duty jobs while still providing precise control. This level of torque is enough to drive long screws, bolts, and fasteners into a wide variety of materials, including wood, metal, and concrete.
Additionally, it is an ideal torque level for completing large jobs, such as building decks or sheds, quickly and effectively. Furthermore, it is flexible enough to suit a large range of jobs, from driving small screws and bolts to attaching large lag screws.
Ultimately, 170 Nm is a great choice for an impact driver.
How much torque does a impact driver have?
Impact drivers impress with their high levels of torque. The amount of torque that an impact driver has depends on its design and size, but most range from 100 to 200 in-lbs of maximum torque. The overpowering torque used in impact drivers is usually obtained through increased RPM (RPM stands for rotations per minute).
This is achieved through a combination of a powerful brushless motor and high-performance transmission. As a result, impact drivers boast impressive power and torque in a very small and lightweight package.
By way of comparison, drills generally produce an average maximum torque of 600-900 in-lbs. This means that impact drivers are capable of providing up to three times the torque of a normal drill.
How strong of an impact wrench do I need?
The strength of the impact wrench you need ultimately depends on the project you will be using it for. If you are going to be working on tires and lug nuts, then you need to get an impact wrench that is capable of delivering up to 150-ft-lbs of torque.
This will ensure that you can loosen and tighten those lug nuts with ease.
If you are doing something a bit heavier-duty, such as construction work or working on bigger bolts, then you will need a more powerful impact wrench. Something like a 350-ft-lbs or higher would be great, as it can handle tougher tasks with ease.
Of course, no matter the purpose you need to make sure that you are getting an impact wrench that isn’t too powerful, as this can be dangerous if you don’t know what you’re doing. Another thing to consider is the type of impact wrench.
You will have to decide between pneumatic, cordless, and electric impact wrenches. Researching each of them and what kind of projects they’re best for is a must before making a decision.
What nm is a good impact wrench?
The ideal impact wrench for your specific needs will depend on a variety of factors, such as the size and weight of the bolts, nuts, and lugs that need to be removed, as well as the level of precision required for the job.
Generally speaking, an impact wrench with a strength rating of around 300-400 Nm (224-295 ft-lb) will be sufficient for most jobs. Smaller nuts and bolts might require something even smaller, such as a 1/2” or 3/4” impact wrench with a maximum torque of 5-20 Nm (3.7-14.
7 ft-lb). Larger nuts, bolts, and lugs might require a 3/4” or 1” impact wrench with maximum torque ratings of 450-750 Nm (331-552 ft-lb). If you’re dealing with extremely large nuts and bolts, you may need to use an even larger 1-1/2” impact wrench with a maximum torque of 1500 Nm (1103 ft-lb).
How many pounds of torque do I need to remove lug nuts?
The amount of torque you need to remove lug nuts depends on what type of vehicle you have and the size of the lug nuts. Generally, most common lug nuts require between 75 and 100 foot-pounds of torque to remove.
It is important to use the torque specified for the vehicle when removing lug nuts, as excessively high torque can cause damage to the wheel studs or wheels. It’s also important to ensure that the lug nuts are properly tightened after the wheel has been installed; the amount of torque needed to properly tighten the lug nuts is usually a bit higher than the amount used to remove them.
Finally, always use a torque wrench when removing or installing lug nuts to ensure that you get the correct amount of torque.
How much torque do I need?
The amount of torque you need ultimately depends on the specific application you are using. Generally, more torque is needed for heavier tasks and more power is needed for faster tasks. Generally speaking, the more torque you need, the higher the RPMs will be.
As a general rule of thumb, the more torque you need, the higher the horsepower should be when selecting the right motor. It is important to understand the amount of torque your application requires so that you can select the proper motor.
If you are unsure, you should consult a mechanical engineer or someone with a greater understanding of motor-driven applications.
What size air compressor do you need to run an impact wrench?
The size of air compressor you need to run an impact wrench will depend on the size of impact wrench you have and the type of job you plan to do with it. Smaller impact wrenches require less CFM (Cubic Feet per Minute) and PSI (Pounds per Square Inch).
For example, a 1/4-inch impact wrench running at 90 PSI may only need a 2-HP air compressor with a 5-gallon tank, while a 3/4-inch impact wrench running at 140 PSI may need a 5-HP air compressor with a 30-gallon tank.
Generally, you should buy an air compressor that can deliver at least 135 PSI and has enough capacity to meet the CFM requirements of your impact wrench. It’s advisable to also get an air compressor with more than one horsepower, as this will enable it to produce more pressure and help you finish tasks faster.
Do I need a high torque impact?
It depends on what you plan to use the impact for and the type of material you’ll be working on. If you plan to use the impact for very heavy duty fastening applications, then you will likely need a high torque impact.
High torque impacts typically feature higher power ratings and maximum torque output, making them better suited for harder and larger fastening jobs. They are also typically heavier and thicker than regular torque impacts, and can handle more repeated use and more powerful driving.
On the other hand, if you expect to only be using a torque impact occasionally, or for lighter duty fastening duties, a regular torque impact will likely suffice.
Which 1/2 impact has the most torque?
1/2 inch impact wrenches typically have the most torque out of all sizes. The amount of torque can range from anywhere between 400 Nm to 800 Nm depending on the brand and model, so torque really depends on the specific tool.
1/2 inch impact wrenches are typically more powerful and they have an increased capacity to tackle harder fastening tasks and loosening bolts than the smaller 1/4, 3/8 and even 1/4 inch impact wrenches.
They are popularly used across industries and are the preferred tool for professionals working on vehicles, pipelines and manufacturing and industrial applications. In addition, they are also versatile and can be used with different socket sizes and head types, allowing them to perform a wide range of applications.
What is a good torque for an impact?
The right torque for an impact can depend on the type of application and the size of the fastener. Generally speaking, it is recommended to use a torque of 30 ft-lbs for most fastening applications. However, for heavier duty applications, a higher torque setting is needed.
For example, lags and lag screws may require a torque setting of 90 to 120 ft-lbs. When tightening uneven surfaces or soft materials, a lower torque may be used to avoid overtightening. If a torque wrench is used, it is important to make sure that it is calibrated correctly.
The user should also take into consideration the amount of friction being introduced into the system so as not to over-tighten and potentially damage the fastener.
How much torque do you need for automotive work?
The amount of torque you need for automotive work will depend on the specific task you need to perform. In general, it is best to start with the manufacturer’s recommended torque for any given job. This will usually be provided with the parts needed for the job or in the vehicle’s owner’s manual or shop manual.
As far as individual torque specifications for your vehicle, larger jobs like changing fluids, spark plugs or air filters may require common torque values of around 10 foot-pounds (ft-lb). Tasks such as replacing brakes, exhaust components, suspension and steering components, or drivetrain components could require up to anywhere from 60 to over 150 ft-lb, depending on the specific job.
When using a torque wrench, make sure it is in good working condition and is rated for the job you need to complete. If the torque is too low, parts may not stay in place and could come loose, possibly leading to vehicle damage.
If it is too high, parts may be damaged, stripped, or warp. Therefore, it is important to always use the correct wrench and torque values for the job at hand.
What is the highest torque 1/2 impact wrench?
The highest torque 1/2 impact wrench on the market is the Ingersoll Rand W7150-K2 1/2 High-Torque Impact Wrench. This industry-leading impact wrench produces 1,100 ft-lbs of nut-busting torque and 1,650 ft-lbs of maximum reverse torque.
It also has an adjustable power regulator to easily adjust power and torque in the application. It is designed for superior ergonomics and balance, and its powerful motor makes it the ideal tool for heavy-duty industrial applications.
Additionally, this impact wrench has an extended anvil to provide improved access to hard-to-reach applications. Its convenient size and weight make it easy to work with and transport as needed.