A board on board fence is an excellent option for homeowners looking to add privacy and protection to their property. It is one of the most durable and secure types of fences, since the boards overlap and are usually made of pressure-treated wood, PVC, vinyl, or metal.
The boards also provide a solid barrier between the outdoors and the inside of your home, while still allowing natural light to pass through. Additionally, this type of fence tends to be more aesthetically pleasing than a typical chain-link or picket fence, making it a great option for those looking to boost the value of their property.
All in all, a board on board fence is a great choice for anyone who wants to add privacy and protection to their property.
What are the boards called on a fence?
The boards on a fence are commonly referred to as pickets. Often, pickets are typically thin boards of approximately 1 by 6 inches thickness, but can vary in size depending on the style of fence. These pickets are typically arranged side by side and usually supported by posts, stringers, and rails.
When the pickets are placed together, a solid line is then formed that is the base for the fence. Pickets may also be referred to as slats, palings, laths, or battens. Most pickets are made of wood or aluminum, although vinyl pickets are becoming increasingly popular.
Does board on board fence look the same on both sides?
The short answer is no; board on board fences do not look the same on both sides. This type of fence has overlapping pickets on both sides of the fence, creating two distinct looks. On one side, the pickets overlap in an overlapping pattern with one picket covering the top of the other.
On the other side, the pickets overlap in a straight line pattern with two pickets going through each other at the base. Depending on the individual style and design, the look of the boards on one side can be very different from the look on the other side.
As a result, board on board fences often have one side with a more solid, bold look while the other side has a softer, more decorative appearance.
Do I have to give my Neighbour the good side of the fence?
No, you do not have to give your neighbour the good side of the fence. It is generally accepted that the good side of a fence is the side that faces away from public view, and so that would normally stay on your side of the fence.
However, each situation will vary depending on the layout of the land and the individual boundaries, so it is always best to check with your local authority or your neighbours before deciding who should get the good side of the fence.
In some places, the law may even dictate which side of the fence should face which direction. If you are unable to reach an agreement with your neighbour, you may also wish to discuss the issue with a mediator to help you come to a better understanding.
What is a good neighbor style fence?
A good neighbor style fence is a design of fencing that has overlapping pickets and an alternating post pattern which makes each side of the fence flush and identical from both sides to create a uniform look.
This design is commonly used to create the illusion of a single, shared fence between two properties and it is becoming increasingly popular because it is aesthetically pleasing and creates a pleasant appearance while still providing a secure boundary.
Additionally, it is a great option for neighbors as it is strong and durable and can easily be altered in height should local regulations require it. Stained wood, painted panels, and metal pickets are all options for materials to choose from to help create a good neighbor style fence.
Ultimately, a good neighbor style fence is a great way to create a attractive and secure boundary between two adjacent properties.
What does board on board fencing look like?
Board on board fencing consists of overlapping boards that provide privacy and also make a truly unique visual display. It is commonly used to section off a yard or as a boundary for a garden. Board on board fencing consists of evenly spaced posts that hold the boards, which have been cut and hand-shaped to fit against one another.
The boards are then nailed to horizontal framework and spaced closely so that one board overlaps the next, creating an intricate and attractive alternating pattern. Usually, board on board fencing is made with wood, such as cedar or pine, creating a warm and rustic look.
Because of the overlap, board on board fencing provides additional protection from prying eyes and is ideal for providing privacy in residential areas. Additionally, it can be stained or painted to match the home’s exterior, enhancing overall aesthetics.
Board on board fencing is moderate in terms of both cost and installation and is a great way to add character and charm to any outdoor space.
What is a double boarded fence?
A double boarded fence is a type of fencing that uses two boards, typically made of wood or vinyl, to form the fencing panel. The boards are typically placed side by side and are typically installed vertically in an alternating pattern.
They give a more attractive and attractive look than traditional fencing options and are also more durable. Double boarded fences can provide more privacy than some other fencing types and can also act as a deterrent to animals and intruders.
The height of the fence can be adjusted to fit the needs of the homeowner and the space they are trying to secure. Double boarded fences are very popular in residential neighborhoods and are often used to protect gardens and yards.
They can also be used to enclose a pool, childrens’ play area, or as a way to divide two properties. Double boarded fences are a great way to add value to a property as well as providing a secure barrier.
Can you put boards on both sides of a fence?
Yes, you can put boards on both sides of a fence. Boards can provide additional privacy, help muffle sound, add a decorative touch, and create a safer enclosed area. Installing boards can also increase the lifespan of the fence.
Depending on the type of boards used, installation may be done with screws, nails, or staples. It is important to use the proper fasteners with the type of fence and boards you are using. It is also important to use weather-resistant fasteners so that they do not corrode over time.
Additionally, it is important to properly finish the boards to protect them from the elements, as well as ensure that the boards are securely attached to the fence.
How do you nail overlap fence boards?
Nailing overlap fence boards is a fairly straightforward process. You’ll need to begin by preparing the fence posts by adding the support beams or timber rails and then assembling the boards. You’ll need a few tools including a claw hammer, nails, a saw, drill, level, and tape measure.
To begin nailing overlap fence boards, you’ll need to start at one end of the fence and measure out each board, making sure to leave enough room between them for the nails. Once you have your boards in place, use the tape measure to find the center of the board and mark where the nails should go.
Pre-drill holes for your nails, then use your claw hammer to drive the nails into the boards. Repeat the process for each panel until the fence is complete.
Make sure to use galvanized nails to reduce the risk of rusting, and check that the boards are level and sturdy with the level once all of your nails are in place. Then, you can enjoy the improvement your new fence makes to your yard and property!.
How do you install a double sided fence?
Installing a double sided fence can be done relatively easily, but it does require some time and effort. Below are the steps for installing a double sided fence:
1. Survey the area and decide on the desired height and length of the fence and the placement of the posts.
2. Mark the post positions and dig the postholes.
3. Put the posts in the postholes and check their position and alignment.
4. Secure the posts into the ground with concrete mix or premixed concrete.
5. Build each panel of the fence, starting with one side, then the other and making sure to keep the tops level.
6. Secure the panels to the posts using galvanized nails, lag screws, and/or brackets.
7. Attach the pickets to the double sided fence panels using galvanized nails and/or screws.
8. Attach decorative elements (e.g. post caps) to the top of each post and/or at strategic intervals along the length and height of the fence.
9. Staple chicken wire or other wire mesh to the fence, if desired, to keep animals out or keep them in.
10. Paint or stain the fence and apply waterproofing sealant or oil if desired.
Following these steps will ensure that a double sided fence is properly installed and secure.
What side should good side be on fence?
The good side or street side of a fence should face away from the property or away from the people living in the area. This helps to ensure that the fence isn’t an eyesore to anyone who is passing by.
Fences that are placed near sidewalks, roads, or parks should have their good side facing outwards so that it isn’t a distraction or an obstruction to those who are enjoying the area. Additionally, if the fence is in an area with strong winds, having the good side of the fence facing away from the property can help to ensure that the fence is able to withstand the wind without being damaged.
Who gets the better side of the fence?
Ultimately, it depends on what side of the fence you are trying to specify. Generally speaking, if someone is referring to the better side of the fence, they likely mean the less visible side; the one that can offer more privacy and quiet.
This side might be the one that is better shielded from the elements, or the one that won’t suffer from sun, wind, or water damage. However, if you are referring to the better side of the fence in terms of aesthetics, it might depend on what type of construction the fence is made of.
For example, if there is a wood fence, each side may show different signs of aging or weathering, making one more appealing to the eye than the other. Ultimately, there is no “better” side of the fence, as each side could offer different advantages depending on the needs and preferences of the people involved.
Should fence boards be tight together?
Yes, fence boards should be tight together. This ensures that the integrity of the fence is intact, preventing any gaps that could let small animals or pests through, as well as preventing children or adults from slipping between boards.
Additionally, leaving gaps between fence boards can allow water or moisture to accumulate, which can encourage the growth of mold or mildew and may weaken the fence over time. Tightly fitting boards also creates a more uniform, attractive look overall.
How much should fence boards overlap?
When building a fence, it is important to make sure the boards overlap correctly so the fence provides the necessary amount of privacy. The exact amount of overlap between boards will depend on the size of the fence panel and the type of fencing material used.
Generally, wooden fence boards should overlap by at least two inches. This is often enough to ensure that gaps between boards are minimal and the overall effect of the fence is much greater. If using chain link fencing, overlap should be between four and five inches to make sure the chain link panels are secure and cannot be easily pulled apart.
Vinyl fencing should form an overlapping fit with a minimum of four inches. Additionally, fence boards should keep the same amount of overlap throughout the length of the fence to make sure the structure is even and sturdy.