Yes, it is OK to leave a pool robot in the pool, as long as you follow the manufacturer’s instructions. Most pool robots have a specific time setting, usually one to three hours, and should be left in the pool for that time period only.
This will help to ensure the robot does not overheat, as well as to protect the life of the robot. Additionally, be sure to scoop out any large debris that could get blocked by the robot, as this could cause it to get stuck.
Finally, be sure to unplug the robot and store it in a dry place when not in use.
How do I get the Dolphin pool cleaner out of my pool?
Getting a Dolphin Pool Cleaner out of your pool is a relatively straightforward process, depending on the model of Dolphin you have.
For suction-side Dolphins, such as the Dolphin Proteus or Nautilus, disconnect the suction hose from the cleaner at the skimmer or suction port. Then turn off the pump, if your pool has a dedicated cleaner line, or shut the valve at the suction port, attach the skimmer cleaning head to the hose and lift the Dolphin out of the pool.
For pressure-side Dolphins, such as the Nautilus Plus, turn off the pump, disconnect the cleaner hose from the pump, release the locking clips on the top and bottom sides of the cleaner, and lift it out of the pool.
Once the cleaner is out of the pool, take the time to inspect the moving parts of the cleaner, such as the diaphragm, and clean or replace any parts that may be worn or broken. Vacuum the filter bags and clean and lubricate the drive track and wheels.
And other specific tasks will vary depending on the model of the cleaner.
Once you’ve taken the time to care for your cleaner, the Dolphin should be ready for its next cleaning mission in your pool.
Can a pool robot stay in water?
Yes, a pool robot can stay in water. Pool robots are designed to move around the pool and clean debris, allowing you to spend more time enjoying your pool. They can stay in the water and operate autonomously, scrubbing and vacuuming the pool floor and walls.
Some pool robots are equipped with sensors to detect and avoid obstacles, like steps or ladders, and most can switch between the two types of cleaning modes for a more efficient clean. They are typically powered by either batteries or an AC power adapter and can be easily stored out of the water when not in use.
How often should I run my Dolphin pool cleaner?
Ideally, you should run your Dolphin pool cleaner at least once a week. This will ensure that your pool is sufficiently cleaned and maintained. Depending on the size and shape of your pool, it may need to be run more frequently.
Additionally, if you have a lot of trees, plants, or other foreign objects that may end up in your pool, your Dolphin pool cleaner might need to be used more often. It may also be necessary to run your Dolphin pool cleaner more frequently if the water chemistry is not balanced and water clarity is low.
To ensure your pool is always clean and clear, you should inspect it regularly and take action as necessary.
Why is my Dolphin Nautilus not moving?
If your Dolphin Nautilus robot pool cleaner isn’t moving, there could be a few possible causes. Firstly, the power adaptor may need to be checked to make sure it is firmly plugged into both the robot cleaner and outlet.
Secondly, check the power switch to make sure it is in the “on” position, and that the indicator light is lit. Thirdly, the filter bag may need to be emptied as it may be full. Depending on the model of your Dolphin Nautilus, the filter bag can be unzipped and emptied or the filter cartridges may need to be rinsed and cleaned.
Fourthly, check the cables on your Dolphin Nautilus for wear or damage. If you find any signs of damage to the cables, then replace them with new ones as this could be what’s stopping the robot cleaner from moving.
Lastly, check that the power cord has been unwound completely and is not stuck or twisted in any way as this could cause the robot cleaner to have difficulties navigating the pool. If all of these checks have been made and no issues are found, then it is possible that the robot’s motor is faulty and will need to be replaced.
How do I clean my Dolphin Nautilus impeller?
Cleaning the impeller on your Dolphin Nautilus is an important step when maintaining your pool cleaner. Before you start, make sure to disconnect the power source from the unit. The impeller can be the key component to a longer lasting life of the pool cleaner.
To clean the impeller, you will need a soft-bristled brush, a can of compressed air, and a small vacuum with a hose attachment. Start by simply brushing off any debris that may have accumulated on the blades of the impeller.
Then, use the vacuum hose to suck up any small particles from the impeller. Make sure to vacuum the entire area, not just the blades.
After using the vacuum, insert the canned air into the impeller opening, and blow away any remaining particles, then treat the impeller blades with a soft cloth and a mild detergent or soap if necessary.
Be sure to rinse the impeller thoroughly before reassembling the Dolphin Nautilus.
Once all parts have been cleaned, reconnect the cord securely and start your Dolphin Nautilus on a test run to make sure everything is functioning properly. If your cleaner is having any issues, refer to the owner’s manual and troubleshoot the issue accordingly.
Regularly cleaning your pool’s filter and pump basket as well as the impeller can also help improve performance.
Who makes the Dolphin?
Dolphin Pool Cleaners are made by Maytronics Ltd. , an Israeli company that has been in the business of pool cleaning products since 1983. They offer a variety of robotic and suction-side pool cleaners that are designed to efficiently and effectively clean in-ground, vinyl-lined and above-ground pools.
Dolphin Pool Cleaners use sophisticated technology and unique features to provide maximum performance and user-friendly operation. The whole range of pool cleaners offers enhanced cleaning coverage, full pool coverage, powerful filtration, and free app or voice activated control systems.
All Dolphin Pool Cleaners are designed to provide years of trouble-free performance and are backed by a comprehensive two-year warranty, exclusive to Maytronics.
Is Maytronics and Dolphin the same?
No, Maytronics and Dolphin are not the same. Maytronics is an Israeli robotics and technology company that specializes in pool automation and robotics, while Dolphin is a brand of robotic pool cleaners manufactured by the Maytronics corporation.
While the Maytronics corporation manufactures and distributes the Dolphin line of robotic pool cleaners, they are not the same thing. Maytronics specializes in pool automation and robotics, and produces a wide range of pool cleaning solutions, from robotic pool cleaners to suction-side and pressure-side cleaners, and various pool-cleaning components.
Dolphin is simply one specific line of robotic pool cleaners manufactured by the Maytronics Corporation.
Where are Maytronics made?
Maytronics is a robotic pool cleaning company based in Israel. They are the makers of the Dolphin robotic cleaners, which are the world’s most popular pool cleaning solutions. The company’s headquarters, research and development, and manufacturing facilities are all located in Israel, in the towns of Rosh HaAyin, Rishon LeZion and Netanya, respectively.
Maytronics is best known for its Dolphin robotic cleaners, who have been revolutionizing pool cleaning for over 15 years. They have also recently pioneered new, active pool cleaning solutions such as their Swash water polishers and Swift autonomous cleaners.
All of Maytronics’ products are designed and manufactured in Israel, using only the most advanced technologies to ensure their superior performance and superior quality.
Is Maytronics a US company?
No, Maytronics is not a US company. Maytronics is an Israeli company that was founded in 1986. Its headquarters is located in Rosh HaAyin, Israel. The company specializes in the production of robotic pool cleaners and cleaning systems.
Additionally, they offer pool maintenance services, water treatment chemicals, brushes, and robotic cleaning accessories. Maytronics has been successful in providing its products and services to customers, dealers, and distributors worldwide.
Why can’t you use an extension cord with a Dolphin pool cleaner?
Using an extension cord with a pool cleaner can be extremely dangerous and should be avoided at all costs. Extension cords are not designed to be submerged in water, which is what pool cleaners are specifically made to do.
Furthermore, the electricity running through an extension cord would be too powerful for a pool cleaner, potentially damaging both the cleaner and the electrical outlets, leading to the potential of electric shock or fire.
Additionally, extension cords are not typically built for long-term use or for rough environments, meaning they may become damaged by being regularly submerged in chlorinated water. Thus, it is not recommended to use an extension cord with a Dolphin pool cleaner.
Can I leave my pool robot overnight?
That depends on the type of pool robot you have. Some types of robots can operate overnight while others are designed to operate during a specific time frame each day. If you have an automatic pool robot that is specifically designed to operate overnight then it should be safe to leave the robot unattended while it is operating.
However, if your robot is not specifically designed to operate overnight, it could be a good idea to monitor the robot while it is operating and switch it off if you notice any irregularities or problems.
Ultimately, it is best to check the product manual for your specific pool robot to ensure that it is safe to leave the robot operating overnight.
Does Dolphin pool cleaner disable automatically?
Yes, Dolphin Pool Cleaners have an automatic shutdown feature that allows the cleaner to shut down after a preset number of hours or once cleaning of the pool is completed. This safety feature is designed to protect the motor from damage or overuse.
The preset number of hours can be adjusted depending on the size of the pool and the type of cleaning required, so that you can customize the cleaner to your specific needs. Additionally, it is important to note that the Dolphin Pool Cleaners are designed to clean all types of pools, including in-ground, above ground, and fiberglass pools.
To take full advantage of the Dolphin Pool Cleaners’ features and safety features, it is important to read the installation manual that comes with your purchased model.
How do I get rid of dead algae in my pool without a vacuum?
Removing dead algae from your pool without a vacuum is possible, but it may take some time. The best way to start is by thoroughly shocking your pool with chlorine. It is best to use a chlorine shock that contains an algaecide to help eliminate the existing algae.
After shocking, you will want to brush the walls and floor of your pool to help loosen any dead particles of algae. If you own a robotic pool cleaner, you can use it to help remove any dead particles of algae.
Once all of the dead algae has been removed, adjust your pool’s chemicals including pH, alkalinity and chlorine. Controlling these levels will help prevent further algae growth. It is also recommended to use a weekly algaecide to prevent algae growth in the future.
Additionally, be sure to frequently brush your pool, maintain adequate water circulation, limit direct sunlight, keep your filter clean and run your pool pump regularly. Using these methods will help keep your pool clean and free of dead algae.
Does Dolphin Nautilus climb walls?
No, Dolphin Nautilus robotic pool cleaners do not climb walls. They are designed to clean the floor and walls of your in ground swimming pool, but they do not actually climb walls. Instead, they rely on the water flow created by their powerful pump to move them up and down the sides of the pool, fully cleaning the walls of your pool.
While they do not actually climb the walls, they do a great job of cleaning them.