Yes, it is generally okay to tile around a toilet. Tiling around a toilet can help to protect the walls from moisture and create a decorative focal point. Proper installation is important to ensure a successful outcome, and there are some helpful tips to consider.
First, it is a good idea to remove the toilet before tiling. This prevents damage to the toilet while allowing access to the wall studs underneath. Make sure to use waterproof materials such as ceramic or porcelain tile, as well as thin-set mortar and grout that are specifically formulated for installation in wet areas such as bathrooms.
Lastly, it is a good idea to install a new wax ring and have the toilet completely leveled before being reset. Having a professional tile installer can be helpful to ensure the project is completed correctly and safely.
Do you tile around the toilet or under it?
When installing tile around and under the toilet, it is important to use the correct materials, tools, and techniques. Around the toilet you will want to use either a solid sealer like silicone caulk or an elastomeric grout or mortar.
Under the toilet, you will want to use a flexible elastomeric grout or mortar. It’s also a good idea to waterproof the floor around the toilet.
When it comes to tools, a tile saw or wet saw should be used when cutting tile. A grout float should also be used to apply the grout. You’ll also want to use a trowel and spacers to ensure proper fit and timing.
To ensure a tight seal around the edges, use a carpenter’s square to position the tiles before cutting them.
The tile should be installed on a substrate appropriate for the flooring material and the type of tile used. Make sure that the surface is free of dust, dirt, and debris before laying down the tile. Whenever possible, use hardboard backing or another protecting medium between the tile and the floor to help keep the tile from cracking.
Use tiles of the same thickness, which will give you a consistent look.
Before you begin tiling around and under the toilet, it’s important to ensure that the toilet is secured with wax rings, bolts, and an anchor. A plumber’s putty should be used at the base of the toilet to ensure a watertight seal.
Finally, be sure to read the manufacturer’s instructions carefully and follow the installation process as closely as possible. This will ensure a safe, quality installation and prevent costly mistakes.
Do you tile wall behind a toilet?
Yes, you can tile a wall behind a toilet. Tiling a wall behind a toilet is an easy way to give your bathroom an updated and refreshed look. It is also a relatively inexpensive project, as most tiles are not expensive.
Furthermore, the tiles can be easy to clean and make the bathroom look more hygienic. To tile behind a toilet, you typically need to purchase tile, grout, and any essential tools. It’s important to measure the space you have to work with and purchase enough tile for the wall.
Additionally, you should also purchase a sealer for the grout. After gathering the supplies, you will be ready to start laying the tile. To begin, you may need to make sure the wall behind the toilet is clean, level, and sturdy.
You then lay out your tile and place it on the wall, using an adhesive if needed. You may need to cut or shape the tiles to fit into the space around the toilet. After the tiles are in place, you will need to add the grout, then clean and seal it.
Once finished, you can admire how much better your bathroom looks with the tiled wall.
Should I tile behind toilet and vanity?
Yes, it is recommended that you tile behind the toilet and vanity. Tiling behind these fixtures can help protect your walls from water damage, as well as making your bathroom look more aesthetically pleasing.
Installing tiles behind the toilet and vanity is relatively easy and can be done without the need for a professional. You should use tiles that are waterproof and either self-adhesive or applied with a special mastic glue.
Make sure to use high-quality materials when tiling and keep any grout sealed if necessary. Additionally, be sure to caulk around your toilet and vanity in order to reduce moisture penetration into the walls.
Once you’ve completed tiling, you should also invest in a dehumidifier to help reduce the amount of humidity in your bathroom in order to further protect the wall and flooring.
What goes first toilet or tile?
When installing a bathroom, the first step should always be to install the toilet. The toilet should be the first step before anything else, such as tile. Plumbing is the most important to do before anything else in the bathroom.
The toilet must be connected to the main drain and the water supply, so it needs to be installed before anything else. Once the toilet is installed, then the other components of the bathroom such as tile, vanity, shower, sink and fixtures should be installed.
It is also important to remember to caulk the toilet before installing the tile, as this will help ensure a watertight seal and reduce the risk of water damage in the long run.
How close should tile be to toilet flange?
When tiling around a toilet flange, it is important to ensure that there is enough space between the two so that the flange does not become blocked by the tile. As a general rule of thumb, the tile should be placed at least 1/4″ away from the edge of the flange.
It is also recommended to leave 1/16″ of space between the tile and the wall behind the toilet flange. This will create a sufficient gap for grout and make it easier to clean the area. Additionally, it is important to use waterproof grout and a water-resistant sealant to protect the area around the flange.
Finally, before proceeding with the installation, the floor under the toilet should be assessed to ensure the flange is properly secured and that the subfloor does not have any moisture damage.
Should bathroom walls be tiled?
Bathroom walls should be tiled if you want a waterproof, low-maintenance, durable option. Tiles are a great choice for bathrooms because they are waterproof and low-maintenance. They are also very durable and don’t require any painting or staining.
Tiles also come in a wide variety of styles and colors, so you can find the perfect look for your bathroom. When tiling a bathroom wall, you should be sure to use waterproof materials like ceramic tile or natural stone tile.
You will also need to seal the tiles and grout regularly to prevent water from seeping in and damaging the wall or causing mold growth. Tiles can be easily wiped down and don’t require much scrubbing to keep clean.
Overall, tiling your bathroom walls is an excellent choice if you are looking for a waterproof, low-maintenance, and durable option.
Does toilet sit on top of tile?
Yes, it does! Toilet installation typically involves a layer of plywood or fiberboard being laid over the subfloor and tile is laid over that. The toilet is then placed on top of the tile, using a wax ring to create a seal between the toilet and tile.
Toilet flange bolts are used to secure the toilet to the floor. If the installation requires tiling the floor, the toilet should be set in place before the tile is laid. For more detailed instructions on how to install a toilet on top of tile, consult a professional plumber or home improvement store.
Can you tile a bathroom without removing the toilet?
Yes, it is possible to tile a bathroom without removing the toilet; however, the process can be difficult, time-consuming, and potentially risky if not done correctly. In order to tile around the toilet, the first step is to remove the toilet tank from the bowl.
This is important to ensure that the new tile doesn’t crack when cracked due to the excess weight of the tank when tiling. Once the tank is removed, the space around the toilet bowl should be marked off and the aluminum trim should be removed.
This step allows the edges of the tiles to fit snugly against the toilet. Once the tiles have been cut to size, they can be applied to the floor, going up each side and around the toilet. Once the new tiles have been installed, the tank can be reattached and silicone caulk can be applied around the edges to ensure the tiles stay in place.
The entire process of tiling around the toilet can be difficult, but with the right tools and knowledge, it can be accomplished without having to remove the toilet from its position.
Can toilet flange be flush with tile?
Yes, a toilet flange can be flush with tile. Installing a toilet flange flush with the tile requires some additional preparation. First, make sure that the subfloor and the supporting framework are solid and level.
You’ll also need voids to be created in the floor so that the flange can freely move with the settling of the house.
Once the voids are created, you’ll want to make sure the flange is installed correctly to prevent any leaks. With the flange in place, use a self-leveling compound to fill any gaps that may exist between the flange and the tile.
Once the self-leveling compound is dry, you’ll need to make sure that your tile floor is properly sealed prior to installing your toilet. This will also prevent any water from getting under the flange and potentially causing damage.
Once your toilet is installed and secured, you’ll be free to enjoy your new flush with tile look.
How far should a toilet flange be above the floor?
The ideal height for a toilet flange should be no more than 1/4 inch above the finished floor level. If the flange is installed too high, the wax ring seal may not be able to provide an effective seal between the toilet and flange.
If the flange is not flush with the finished floor, add shims between the floor and flange to level the toilet. Avoid using a flange extender, as this adds extra components, which can increase the risk of a leak.
Additionally, it is important to consider the location of existing water and drain lines before installing a new flange, as the flange should be in line with both.