Whether shower tiles should go to the ceiling is a matter of personal preference. However, there are a few points to consider.
If your shower has a sloped ceiling, it may not be possible to tile up to the ceiling. In this case, you will either need to stop the tile at a certain height, or consider a different type of flooring, such as a hydro-resistant panel.
On the other hand, tiling your shower right up to the ceiling can create a more cohesive and finished look, while also allowing a more efficient use of the space and providing more easily-maintained, water-tight surfaces.
It’s also a great way to introduce a color, texture or pattern to your shower design.
Another consideration is cost. Installing tiles up to the ceiling will require more square footage of tile, and you may need to purchase or rent special tools to properly grout and seal the tiles to ensure a water-tight, finished surface.
In the end, whether shower tiles go to the ceiling is a matter of personal preference and budget. Talk to a professional tile contractor to determine the best approach for your space.
How high should I tile my shower?
When it comes to tiling your shower, the height you should tile will largely depend on the type of tiles you have chosen. Generally, it is best to tile up to the ceiling or to about 7 feet in height for most showers.
However, depending on the specific needs of your shower, such as needing additional insulation to prevent condensation, you may want to tile the walls up to 8 feet. If you are using larger tiles, then it is best to use the same height for each row of tile.
This will also help create a more uniform look which can help enhance the overall aesthetic of the shower. Finally, it is important to consider your tiling pattern when deciding how high to tile your shower.
If you are using a linear pattern then you should tile up to 8 feet. However, if you are using a more intricate pattern, then you may need to fill in the negative space by doubling the height of the shower up to the ceiling.
It is important to note that if you are using a pattern that has smaller tiles, then it is best to use a 2-inch grout line to prevent the tile from cracking.
What should I put between tile and shower?
When installing tile and shower walls, it is important to include a waterproofing membrane between the tile and the shower walls. This is key to preventing water seepage and possible damage to the underlying walls.
This membrane can be liquid applied or sheet-applied; both provide an effective barrier. Liquid applied products are best for areas that are difficult to waterproof, such as corners or other intricate shapes.
Sheet-applied products, on the other hand, are ideal for flat expanses. As part of the installation, use a product specifically designed to adhere to both tile and shower walls. After the membrane has been installed, allow it to dry before proceeding with the tile installation.
This is key to creating a watertight seal and protecting the walls. In addition to the waterproofing membrane, you may also need to use a backer board or cement board in between the tile and the shower walls, depending on the type of tile and shower and the desired look.
Cement board provides additional stability, ensuring a longer lasting installation. Thoroughly review the manufacturer’s installation instructions and cautions before undertaking any tile project.
Should tile be at the top or bottom of a shower wall?
It is highly recommended to place tile at the top of a shower wall rather than the bottom. This is because tile at the top of the wall provides a waterproof barrier and better blocks moisture from entering into the wall.
Additionally, tile at the top of the wall is easier to clean than tile at the bottom because water runs down the wall instead of having the potential to accumulate at the bottom. Furthermore, having tile at the top of the wall also provides a nice visual effect as it can provide contrast with the color of the shower walls.
Lastly, tile at the top of the wall is also less likely to suffer damage due to soap and water accumulation, which makes it last longer. In conclusion, based on all the reasons mentioned above, tile should be at the top of a shower wall instead of the bottom.
How do you tile an existing shower?
Tiling an existing shower can be a relatively straightforward process, especially if the shower is already built-in and already lined with a waterproof seal. First, check the existing wall and floor to ensure that the surface is dry, clean, and free from loose particles or other material.
You may need to apply a special bonding agent to ensure proper adhesion. Next, measure the floor and wall of the shower, and cut the tiles properly with a wet saw to ensure a proper fit and finish. Use a notched trowel to spread the thinset mortar on the substrate, then begin laying the tile.
Once the tile is laid, grout the spaces between them using a float and sealer. Once the grout has dried, apply a caulk along the edges of the shower walls to create a waterproof seal. Finish by sealing the entire surface with a quality sealer.
With the right products and a little bit of patience and skill, you can successfully tile your existing shower for a beautiful, finished look.
Can you tile over acrylic shower walls?
Yes, you can tile over acrylic shower walls. However, it is important to do proper preparation to ensure the tiles will stick and remain durable for the long-term. First, start with a clean surface. Then make sure to apply a waterproofing membrane and use a primer specifically made for plastic to create a good bond between the acrylic and the tiles.
Adding a latex modified thin-set mortar will also provide extra reinforcement. Let the mortar dry completely before laying the tile and grouting. Thinset mortar should also be used to set the tile on the wall.
Do not use mastic for this. When applying the grout, use a non-sanded grout so it won’t damage the acrylic. Lastly, use a silicone-based sealant to fill in gaps around the edges of the tiles as well as where they meet the tub.
Following these steps can help ensure your tiles adhere and last a long time.
How do you prepare a shower wall for tile?
Preparing a shower wall for tile is an essential part of any bathroom remodel. First, you must make sure that the wall is clean and free of grease, grime, soap scum, and other debris. Next, you should inspect the wall and make sure it is structurally sound.
If any repair work is necessary, you should hire a professional to make that repair and then inspect it again before continuing. Once the wall is sound, you should fill and patch any cracks or holes in the wall, then prime the wall with a waterproof sealer to protect it from any moisture damage and to provide a proper surface for the tile adhesive.
When the patches and primer have dried, you should apply a coat of a high-quality thinset or mastic adhesive and leave it to set for the amount of time specified by the manufacturer. Finally, you can begin to lay the tile and grout.
Following these steps will help ensure that you have a great-looking finished product that will last for years to come.
What goes on shower walls before tile?
Before tile is installed on shower walls, a surface must be prepared to ensure that the tile adheres properly. Many professionals will begin by inspecting the walls for any water or structural damage, and then removing any existing wall-coverings (such as old tile, paint, etc).
After the walls have been prepped, a layer of cement backer board will be applied before the tile installation. This backer board, typically made from cement and fiberglass, is water-resistant and provides a stable and durable surface on which the tile will be laid.
Additionally, when laying the backer board, it is important to check that it is level, as unevenness could cause problems with the tile installation later on. Once the backer board is laid, most installers will install water-resistant thinset mortar, which is a type of cement-like adhesive and sealant that provides an additional layer of protection against moisture getting behind the tile.
Finally, once the thinset has had time to dry, the tile itself can safely and securely be laid onto the shower wall.
What is the cheapest way to redo a shower?
The cheapest way to redo a shower depends on the existing condition of the shower and how much work needs to be done. Generally, the least expensive option would be to clean and reseal the existing fixtures and walls.
This could involve cleaning the ceramic tile and grout, as well as replacing any cracked or missing tiles. Other cost cutting measures could include re-caulking the seams, resurfacing the walls and floor, installing a new shower head, and replacing worn or outdated fixtures.
Depending on the type of fixtures and details you choose, you may be able to keep costs relatively low. Installing a new enclosure, for example, may cost significantly less than replacing all of the tilework.
It’s also important to shop around for materials to find the best deals.
What materials do you need to tile a shower?
In order to tile a shower, you will need a number of materials, including tile, thinset mortar, grout, sealant, spacers, trowel, and a saw. Depending on the complexity of your project, you may also need a wet saw, a tile nipper, and tile adhesive.
Tile: Your tile of choice will depend on the desired look and feel of your shower. When it comes to tile, the options are practically limitless. Many people prefer ceramic tile, a type of glazed tile that provides a number of unique color and texture options.
Thinset Mortar: Thinset mortar acts as the adhesive to keep your tile in place. It is a thick, paste-like material, and is applied using a trowel. Thinset mortar is also sometimes referred to as “tile mastic” or “tile glue. ”.
Grout: Grout seals the joints between tiles and provides additional protection against water. Ranging from epoxy-based grout to more traditional cement grout.
Sealant: Sealant is used to seal all cracks, crevices, and joints in the shower to prevent moisture from seeping in. Depending on the type of tile you use, you may need a sealant that is specifically designed for that type of tile.
Spacers: Spacers are used to create an even and consistent grout line. Depending on the type of tile you are using, you may need to use plastic or metal spacers.
Trowel: A trowel is necessary for applying the thinset mortar. The size and shape of the trowel depends on the size of the tile and the desired end result.
Saw: Depending on the size of your shower, you may or may not need a saw to complete the tiling job. If you are using small tiles, you can use a simple handsaw. Otherwise, you may want to invest in a wet saw to quickly and accurately cut tiles according to your desired specifications.
Tile Nipper: This tool is used for making precise cuts to individual tiles. It is especially helpful if you are working with intricate patterns or mosaic designs.
Tile Adhesive: Tile adhesive is used to adhere tiles to irregular surfaces, such as concrete. It is essentially the same as thinset mortar, but it is foam-based and more flexible.
Can you put tile over tub surround?
Yes, it is possible to put tile over a tub surround. Before laying the tile, a few preparatory steps must be taken to ensure the best result. First, the surface should be cleaned and any existing caulk and grout should be removed.
Next, any areas that are damaged or weak should either be replaced or patched with a suitable epoxy or mortar. Once all surface prep is complete, it’s time to start laying the tile. It’s important to use a mortar bed for the tiles and to follow the manufacturer’s instructions for how to mix the mortar appropriately.
Creating a slope for water drainage by adding a thin layer of mortar is also important. Lastly, be sure to seal the grout when installation is complete to keep the tile looking its best.
How do you tile over a bathtub?
Tiling over a bathtub is a fairly straightforward process but it is important to ensure that the tiling job is done properly in order to ensure the longevity of the tile work. The first step is to properly prepare the bathtub surface.
This means you need to sand down any ridges or uneven areas and then use a degreasing cleaner to make sure the surface is free of any oils or contaminants. After the surface is prepared you will need to apply a waterproofing compound to the bathtub in order to ensure that the tile and grout do not become damaged by water.
Once the surface is ready the next step is to measure and mark the spot where you want to install the tile. Make sure to draw out the layout and mark any necessary cuts that need to be made for the tile to fit properly.
Once the tile is cut to size, lay it onto the surface and using mortar spread the adhesive onto the back of the tile points and then press the tile firmly on surface. Using a notched trowel, press down and spread the adhesive to a consistent thickness ensuring full coverage.
Once the tiles are all in place you will need to grout the space between tiles. To do this mix together a formula of grout and spread it into the area using a float to make sure it gets evenly distributed.
Allow the grout to dry for a few hours before wiping away the excess grout residue. Finally, seal the tiles to protect them from any potential water damage or staining.
Following these steps carefully will ensure that you have properly tiled over a bathtub and will be able to enjoy the results for many years to come.
How much does it cost to tile a tub surround?
The cost for tiling a tub surround can vary greatly depending on the type of material used, the size of the tub surround, and the complexity of the project. Generally, ceramic tile can range from $0.
50 to $35 per square foot. Professional installation of the tile may cost $12 to $35 per square foot although other services like removing and disposing of the existing installation may add to the overall cost.
On average, a complete project could range from between $700 to $2500. Factors such as tile patterns, options to waterproof the surrounds, and the installation complexity will contribute to the total cost as well.
Labor also can be a factor; sometimes the contractor might need to level a subfloor or make a custom fit for the tile to be installed properly. It is always a good idea to get multiple quotes from both tile installers and tile suppliers to get the best rate in your area.
Where do you start when tiling a bath?
When tiling a bath, it’s important to have a plan in place from the beginning. It’s best to start by measuring the size of the area that you’ll be tiling. This way you can determine the exact amount of tiles that you’ll need to purchase and the ideal pattern or layout.
After measuring, you should clean the surface that you’ll be tiling to get rid of any dirt, grime, and adhesive residue. You’ll then need to decide how you want to lay out your tiles and make sure to leave room in between each tile for grout.
Once you’re ready to begin tiling, apply a flexible mortar adhesive directly to the wall or floor that you’ll be laying tiles on. Next, press the tiles firmly into place onto the adhesive and fit them together as tight as possible.
Finally, leave the adhesive to dry and once it’s fully dry you can grout and seal the area for a professional finish.
Does cement board go over tub lip?
Yes, cement board can go over the lip of a tub. Cement board is a thin, flat panel made of cement and reinforcing fibers. It is used as a water-resistant cover for stud walls or over existing surfaces, either full-length or in sections such as the lip of a tub.
Installing cement board over a tub lip is an important step in the tiling process, as it provides a waterproof base layer for the installation of thin-set mortar and the tile. Make sure the area is properly prepared by removing any existing water-sensitive materials, smoothing out any rough surfaces, and ensuring the area is clean, dry, and free of dirt, dust, and debris before beginning the installation process.
Do you fill a bath before tiling?
When tiling a bathroom, it can be helpful to fill the bath before tiling. Doing so can help you to visualize the look and feel of the finished product, as it can be difficult to visualize a tiled space when the bath is empty.
It can also help you to see the room in 3D so you can plan any tricky cutting or application of tile adhesive. Additionally, filling the bath with water can help to absorb any vibration and movement when you start tiling, ensuring that the tiles are placed correctly once the bath is drained.