Boob ceiling lights are referred to as Pendant Lights. While these lights may have different names, such as chandeliers, need lamp shades, and even globe lighting, they are all traditionally referred to as pendant lights due to their suspended positioning from the ceiling.
The origin of the boob-shaped pendant is inconclusive, however, it has remained a popular style for many years and can be seen in interior design from the 1970s and 1980s. While some may refer to them as wedding cake lights, bubble lights, or water drop lights, their identity as a pendant is still a popular choice for residential and commercial lighting.
Modern boob shaped pendant lights come in various shapes and styles that incorporate different materials such as wood, plastic, and metal for a stylistic look for any location.
What lights can replace boob lights?
Modern lighting fixtures can replace the traditional boob lights and create beautiful, updated designs. Pendant lights, recessed lights, and chandeliers are all great options that can be used instead.
Pendant lights are a great option as they are available in a wide variety of styles, shapes and sizes, so you can find one that fits your décor. Recessed lights provide a simplistic and modern look, while chandeliers can create a grand and ornate look.
You can also consider adding in multiple layers of lights, such as wall sconces or track lighting. Wall sconces can be used to emphasize artwork, while track lighting can provide supplemental lighting in areas of the room with higher ceilings.
Lastly, you can opt for a statement piece, such as a specialty light fixture, to act as a focal point and draw attention to a specific part of the room. There are plenty of options to replace your outdated boob lights and create a unique and stylish design that you can enjoy for years to come.
What are the lights that hang called?
The lights that hang from the ceiling are commonly referred to as ceiling lights, hanging lights, or pendant lights. Ceiling lights are typically mounted on a installation box which is placed in the ceiling and is connected to the electrical wiring in the home.
Pendant lights are fixtures that hang from the ceiling and often have a long cord or chain, allowing them to be hung at different heights. Hanging lights can also refer to flush-mounted ceiling lights that hang off the ceiling, creating a “floating” look.
These often come in the form of chandeliers, island lights, and globe-shaped fixtures.
What Is a swag light?
A swag light is a type of pendant light that hangs from the ceiling by a chain or cable. It hangs from a hook or bracket that is usually attached directly to the ceiling, although some swag lights may attach to a wall or other structure.
Unlike traditional pendant lights, swag lights are designed to hang freely and not be affixed to a flat surface. This makes them ideal for use in bedrooms, offices, studios, and any other space where the user has no access to a ceiling-mounting plate.
Swag lights are available in many sizes, from mini pendants to large diameter ones. They come in a variety of colors, styles, and materials, and can be hung from single or multiple cords, allowing for more flexibility in the final look.
Swag lights are a simple but effective lighting option, creating a unique and customized look in any space.
What is the name for decorative long hanging lights?
The name for decorative long hanging lights is pendant lighting. Pendant lighting typically consists of a light fixture that hangs from a ceiling or wall on a chain or rod, usually featuring a single light or multiple lamps.
Pendant lights are often used as statement pieces in various settings and can come in a variety of styles, ranging from traditional to modern. Common materials used in pendant lighting include glass, metal, and wood, and they can be used as accent lighting in any room of the house, from kitchen islands and dining spaces to foyers, hallways, and bedrooms.
What are the 3 types of lighting?
The three types of lighting are general, task and accent lighting. General lighting is the most basic lighting, providing basic illumination throughout a room or space. It usually comes from fixtures like a ceiling light, recessed lights, or flush mounts.
Task lighting provides light specifically for a certain area, like a desk lamp to help you do work or an over-the-counter light for kitchen tasks. Finally, accent lighting is used to create ambiance in a room.
It highlights works of art, points of interest, and architectural features. This kind of lighting is often directional and brighter than general lighting. Examples of accent lighting include picture lights, track lighting, wall washers and spotlights.
What are sconces?
Scones are a type of light fixture that is commonly mounted on a wall for illumination purposes. They are usually used as an accent lighting or task lighting, and are a popular addition to both residential and commercial spaces.
Sconces can range in design, size and style, and can be found in a variety of materials such as metal, glass, ceramic and crystal. They are often used in combination with other lighting fixtures such as pendant lights and chandeliers in order to create a unique lighting design.
Sconces are typically installed at eye-level or higher, and can be used to provide general lighting, or to highlight artwork or decor in a space. For optimal illumination, sconces should be placed approximately 64 inches apart and mounted six to eight feet from the floor.
What are the different parts of a light fixture called?
Light fixtures consist of several key parts that work together to produce illumination. The main components of a light fixture are the shade, base, socket, and bulb.
The shade is the part of the fixture that covers the bulb, typically made of glass, metal, or fabric. It can be either decorative or plain, depending on the type of fixture.
The base is located under the shade and attaches to the mounting surface. This can be a ceiling, wall, or any other flat surface.
The socket is where the bulb is inserted. This part of the fixture typically has two contact points which allow the bulb to make electrical contact.
The bulb is the source of light and typically consists of a glass or plastic tube that houses the filament or LED. Common types of bulbs include incandescent, fluorescent, and LED.
The connections between each of these components are made by wiring and are typically the same across different fixtures. The wiring connects the power source to the fixture and allows electricity to pass through the switches, socket, and bulb.
The wiring is held together with twist-on connectors and insulated with heat-shrink tubing.
Are they actually called boob lights?
No, they are not actually called ‘boob lights’. They are more commonly referred to as globes, globular lights, and “Sputniks”, which are a type of modern light fixture consisting of several glowing orbs mounted on a central stem.
These lights have seen a resurgence in popularity due to their unique and contemporary aesthetic, making them a popular choice for home decor and lighting designs. Although they are not technically named ‘boob lights’, the shape of these lights have earned them the nickname because of their resemblance to a woman’s bust or cleavage.
Are boob lights good?
Whether boob lights are good or not is largely dependent on the overall look and design of your space. Boob lights, also known as “eyeball” lights or “can” lights, can provide a soft and subtle lighting for the room, and can be used to highlight areas of interest such as paintings, photographs and other artwork.
However, boob lights can look dated and garish and can appear too prominent in certain areas. Depending on the type of lighting in the area and the desired look, boob lights can be a good or a bad match for the overall design.
When deciding if boob lights are right for your space, consider the versatility of the other existing lighting and how the boob lights will fit in and blend with the overall look.
How do you change a flush mount light?
Changing a flush mount light requires a few supplies and steps to complete. First, turn off the power at the breaker before you begin. You will also need a ladder, a drywall anchor, screwdriver, wire strippers, pliers, and the new light fixture.
1. Remove the existing light fixture by unscrewing it in the middle of the plate and then pulling it away from the ceiling. Disconnect the wires and make sure you have the same amount of wire when you install the new fixture.
2. Mark the location of the new light fixture on the ceiling and pre-drill holes using a drywall anchor. This will ensure the drywall won’t break from the weight of the new fixture.
3. Insert the mounting bracket for the light fixture into the pre-drilled holes and secure the bracket to the ceiling with the screws.
4. Strip away about half an inch of the insulation from the ends of the wiring and make sure the coloring from each wire matches up accordingly.
5. Make the connections and wrap the wiring with electrical tape.
6. Place the new light fixture on the mounting bracket and tighten the screws to hold it in place.
7. Reconnect the power and turn on the breaker.
You should now have your new flush mount light installed. If you are uncertain about any of these steps, it’s best to consult a professional before tackling this job.
How do you open a ceiling light cover?
Opening a ceiling light cover can be done in a few steps. Depending on the type of cover, there are two methods to open the ceiling light cover.
Method 1:
For some ceiling light covers, you can open it by inserting a tool into the relief hole at the bottom of the cover. Most covers have this hole to allow you to remove the cover without having to take down the entire fixture.
Simply insert a tool like a flat-head screwdriver or small pry bar into the relief hole and gently twist or pry to remove the cover.
Method 2:
For other ceiling light covers, you will need to unscrew the screws at the edges of the cover to remove it. Check the edges or sides of your cover for screws or wing nuts. Carefully unscrew them using a screwdriver or nut driver and remove the cover.
Once the screws or wing nuts have been removed, the cover should easily come off.
In both cases, be sure to use caution when opening a ceiling light cover. If screws are present, carefully loosen them and make sure not to strip the threads. If a relief hole is used, take care to avoid scratching or damaging the cover.
How do you remove a lampshade from a lamp?
Removing a lampshade from a lamp can be a straightforward process, depending on its design and construction. To start, you should make sure the lamp is unplugged from the power source and cooled down; then you can begin the process.
If the lampshade is attached to the lamp base with screws, you should be able to partially unscrew them with a screwdriver. Once the threads are loosened a bit, you should be able to lift the shade off the lamp without having to remove the screws.
If the lampshade is attached through some other method, such as a pinch shade holder, you will need to use two hands to release it. To do this, one hand should be used to pull the top of the holder away from the lamp while the other hand should be used to press the side of the holder against the lamp base.
This should cause the metal parts of the holder to pull apart, releasing the shade.
For clip-on lampshades, you should unclip the shade from the metal lamp base by squeezing the sides of the clips together and pulling the shade off.
In some rare cases, the lampshade may be sealed to the base with adhesive; if this is the case, you can use a soft cloth and rubbing alcohol, starting from the edge of the shade and working inwards, until the shade is removed.
No matter the method used to attach the lampshade to the lamp, you should handle and store it carefully, so that it is not further damaged and can be used again.
How do you take down a dome light?
Taking down a dome light can be done by first turning off the power to the light. This can usually be done by switching the light switch off, cutting the fuse if the dome light is powered by a fuse box, or turning the breaker off if it is powered by circuit breaker.
Once the power to the light is cut, unscrew the dome light cover, and then unscrew the screws that are holding the dome light in place. Depending on the model of your car, there may be screws or clips attached to the dome light.
Once the screws or clips have been removed, pull the dome light off and the wiring connected to it. Be gentle when pulling the dome light off, as there may be other wires connected to it that you don’t want to damage.
Then remove the wiring from the dome light and you have successfully taken it down.
How do you remove the light cover on a ceiling fan?
In order to safely remove the light cover from a ceiling fan, it is important to follow the steps listed below.
1.Turn off the power at the circuit breaker. Make sure the fan is completely stopped before attempting any repairs.
2.Look for fasteners that hold the cover in place. Most covers are held in place by small bolts or screws, which may be hidden beneath the decorative housing. Carefully unscrew these and set aside.
3.Remove the cover. Unscrew any hidden bolts or screws and carefully slide the cover off.
4.Clean the cover and light fixtures. With the cover off, use a damp cloth to wipe down the cover and any parts inside, especially if you can reach them.
5.Reinstall the cover. Carefully replace the cover, making sure to line up any holes with the newly reattached screws or bolts.
6.Turn the power back on. Make sure to test the fan and all connected lights before leaving the area.
By following these steps, you can safely remove the light cover from your ceiling fan and complete the repair.
How do you take the cover off a fluorescent light fixture?
Taking the cover off a fluorescent light fixture is fairly straightforward. First, you should turn off the power to the fixture at the circuit breaker. Next, you should remove the bulbs from the sockets.
Depending on the kind of fixture, you might also need to remove the reflector, lens, and/or ballast cover in order to access the fixture cover. To do this, you’ll need to unscrew the screws which hold the various components.
Finally, the fixture cover is typically held onto the fixture by screws or clips. You should be able to unscrew the screws or unhook the clips to remove the cover. Be sure to keep any and all screws and clips safe, you will need them to fully assemble your fixture again.