The handles on cupboards are typically referred to as cabinet pulls or drawer pulls. Cabinet pulls are strips of metal, plastic, or wood attached to the face of a cabinet door or drawer front in order to allow it to be opened.
They provide a functional, attractive, and easy way to open and close the cabinet or drawer without the need to use two hands. Cabinet pulls can come in a variety of styles and materials, such as bronze, nickel, brass, ceramic, glass, stainless steel, and more.
They can also be ornate or minimal depending on personal preference and the design of the kitchen or room. Cabinet pulls typically come in large and small sizes, and the size required for a certain cupboard or drawer will depend on the size of the door or drawer front.
Can you replace handles on a dresser?
Yes, you can replace handles on a dresser. Replacing handles on your dresser can be an easy and inexpensive way to give your piece of furniture a fresh, new look. Before you begin the process, you’ll need to decide on the type of handles you’d like to use.
These may be glass, metal, copper, or a variety of other materials. Then, measure the previous holes in the dresser and pick handles that will fit those measurements. To install the new handles, begin by turning off the circuit breaker and unscrewing the old handles.
Place the new handles and mark their placement with a pencil. Next, using a drill and an appropriate screwdriver bit, make a hole in the wood, and insert the screws. Secure these in place, and attach the handles.
Finally, turn the circuit breaker back on and admire your renewed dresser!.
How do I identify drawer pulls?
Identifying drawer pulls can be done by looking at several key factors. First, take into account the style or type of material the pull is made of, such as wood, brass, or plastic. If there is a finish or color to the pull, take that into consideration as well.
If the pull is of a more modern design, then it will likely feature clean, sharp edges. Older pulls may have a more traditional, ornate look to them. If the pull is well-made, it should be comfortable in the hand and an even weight when pulled.
Additionally, inspect the pull for any maker’s mark or stamp that may clearly identify the drawer pull. Finally, if you are still unsure about the style or origin, research the drawer pulls that match your pull for shape, type of material, and any other distinct features to make a more informed decision.
How do you fix a dresser drawer handle?
Fixing a dresser drawer handle depends on the specific handle that you are dealing with.
If the handle has come off the drawer itself, chances are that it is affixed to the drawer by screws. Start by removing the screws and then the handle. Take the handle with you to a hardware store to try to find an exact replacement.
Once you have your replacement, simply attach it to the drawer in the exact same way as the original.
If the handle is still attached to the drawer but is loose, it is likely either a friction catch or a screw catch. If it is a friction catch, you may be able to tighten the handle just by applying some light pressure.
If it is a screw catch, you can tighten it by adjusting the two small screws located at the end of the handle. Be sure not to over-tighten the screws as this may cause the handle to break.
If the handle is broken, it will need to be replaced as mentioned above. If you’re unable to find an exact replacement in a store, you may be able to find one online. If all else fails, you may need to consider buying a new dresser drawer handle altogether.
How do you fix a stripped dresser knob?
To fix a stripped dresser knob, you will need some tools and supplies, such as a Philips head screwdriver, wood glue, and a replacement knob. First, you will need to remove the old, stripped knob from the dresser.
Be careful not to lose the screws in the process. Once the knob has been removed, look for any chunks of wood that have been torn away. If there are any, you will need to fill them in with wood glue.
Allow the glue to completely dry before continuing. Next, you will need to locate a replacement knob that matches the color and size of the original one and attach it with the screws. Make sure to secure the screws tightly so that the knob does not come loose again.
Finally, once everything is secure, the dresser knob should be fixed!.
How do you remove a dresser handle without screws?
Removing a dresser handle without screws requires a bit of patience and caution. First, double check to confirm that there are no hidden screws. If there are no screws, the handle likely has latch pins that help secure it to the drawer.
To remove the handle, apply gentle, even pressure to the handle in opposite directions. You should feel the latch pins loosen, releasing the handle. You may need to rock the handle back and forth to loosen the pins.
Once the pins are loose, you can easily remove the handle without damaging the drawer or the handle itself.
How do you remove cabinet pulls?
Removing cabinet pulls typically involves removing two screws from either side of the cabinet pull. Depending on the type of cabinet pull, the screws may be hidden underneath the decorative cap or visible on the underside of the cap.
Before you begin the removal process, make sure to gather the necessary tools (a flathead or Phillips head screwdriver) to remove the screws.
Once the screws are removed, the cabinet pull should come off with gentle pressure. If the cabinet pulls have been in for a long time, you may need to gently pry them off with a flathead screwdriver or a thin tool like a butter knife or butter spreader.
Make sure to store the screws and the cabinet pulls in a safe place until you are ready to reinstall them. Once the old cabinet pulls are out of the way, you can install the new ones.
How do you measure furniture hardware?
Furniture hardware is usually measured by its length and width. The length is usually measured in millimeters or inches, while the width is usually measured in gauge. When measuring hardware such as pulls and handles, it is important to take the mounting options into consideration.
For instance, if you are measuring pulls or handles that require mounting hardware, you will want to measure from the center of the handle or pull to the outer edge to get an accurate measurement. Knobs and hinges also need to be measured accurately.
Knobs should be measured with a tape measure from the widest point on the handle to the base of the knob. For hinges, it is important to measure the width, thickness, and shape to ensure the correct fit.
It is also important to take into consideration the overlays of any doors and drawers that the hardware will be mounted on. All of these measurements will help you find the best hardware for each piece of furniture.
How is hardware length measured?
Hardware length is typically measured in either inches or millimeters. For smaller items, such as screws and nails, length is often measured in fractions of an inch (for example, 3/4 inch). When measuring larger pieces of hardware or hardware for larger projects, such as pipes, the measurements will be given in terms of inches or millimeters.
In some cases, such as for longer or heavier items, the measurements may be given in feet, yards, or centimeters. To convert between inches and millimeters, one inch is equal to 25.4 millimeters. When measuring hardware length, always use a ruler or some other type of measuring device to ensure accuracy.
How are dresser knobs measured?
When it comes to measuring dresser knobs, the most important measurements to consider are the diameter and projection of the knob. The diameter of the knob is measured from side to side at the widest point of the knob, while the projection of the knob is measured from the face of the knob to the farthest point on the backside.
Depending on the style of knob, other measurements may need to be considered, such as the base diameter (the size of the base of the knob, where it connects to the cabinet), the weight of the knob, or the number of mounting holes it requires.
Depending on the style and type of knob, different measurements may apply. For instance, some knobs are designed with a dropped center and require measurements of the bottom and top projections of the knob in order to ensure proper fit.
Additionally, it is important to note if the knob is symmetrical or asymmetrical, as this may affect how it needs to be installed and could provide additional measurements to consider.
What size pulls for 24 inch drawers?
When selecting pulls for a 24 inch drawer, the size of the pull should correspond to the width of the drawer in addition to the style you’re going for. We recommend more substantial pulls for larger drawers, such as 5-6 inch pulls for a 24 inch drawer.
That said, the size of the pull is ultimately up to personal preference. If you’d prefer a more subtle pull for a larger piece, 4 inch pulls will also do the job on a 24 inch drawer. Choosing between two sizes may come down to whether you’d like to showcase the drawer face or accent your existing cabinetry.
Take into account any details or molding on cabinetry and opt for a size that will not overpower the design. Finally, consider the material you’ll be using for the drawer pull. Some materials require larger dimensions to accommodate them, such as thicker pulls for brass or heavier metals, so we recommend selecting the material and size simultaneously.
How do you choose cabinet hardware size?
When selecting the size of your cabinet hardware, it is important to consider both the size of your cabinetry and the size of the hardware itself. When choosing hardware for cabinets that are brushed or have a ‘matt’ finish, larger hardware will tend to stand out more and make the cabinets easier to open and close.
On cabinets with a glossy or stainless steel finish, smaller hardware may look better and have a more affined feel to it.
It is also essential to consider the overall look and feel of the kitchen. If you are opting for a traditional and classic look to the kitchen, then larger hardware with a more rustic finish will typically look better than smaller pieces with a more modern finish.
On the other hand, if you are looking for something more contemporary, then opt for smaller pieces with a sleeker and more modern finish.
Finally, consider the size of the doors, drawers, and cabinets. Typically, larger pieces on larger cabinets look better since they fill the space more evenly. Smaller pieces on smaller cabinets often look more proportionate and less overpowering.
Also, consider whether puncher pulls or handles look better on the cabinets. Again, a larger knob will have a better look on a large cabinet, and a small knob for a small cabinet.
How do I change the drawer hardware?
If you want to change the drawer hardware, there are a few steps you’ll need to follow. The first step is to remove the existing drawer hardware. To do this, you’ll need a screwdriver or other tool to remove the screws that hold the hardware in place.
Once the screws are removed, you can gently pull the hardware away from the drawer.
The next step is to choose your new hardware. Consider the size and style of the hardware to ensure it matches the décor of the rest of the room. Once you’ve chosen your hardware, you’ll need to transfer the hardware on the drawer to the new hardware.
Use the same screwdriver from earlier and secure the new hardware into place. Make sure all screws are securely in place before moving on to another drawer.
Finally, complete the hardware installation for the last drawer and take a step back to admire your work. Enjoy the look of your newly installed hardware!
Can you change drawer pulls?
Yes, you can change drawer pulls. Changing out drawer pulls is a fairly simple process that can give your furniture a fresh, new look. First, you’ll need to decide on a style of pull. Including knobs and handles.
Once you’ve decided which type of pull you’d like to use, you’ll need to measure the existing pulls. This will help ensure a good fit and prevent any damage to the drawers when you try to reinstall them.
Next, you’ll need to remove the old drawer pulls, which usually involves unscrewing them. Once the old pulls are out, you can install the new ones. Make sure to take the time to line them up and properly attach them to the drawer fronts.
Lastly, you can add a coat of paint or sealant, depending on the material of your pulls, to give them a finished, polished look.