The different types of cabinets generally fall into three main categories: Base cabinets, Wall cabinets and Tall cabinets.
Base cabinets are the most commonly used type of cabinet, and may be mounted to the floor or raised off the ground, allowing for easy cleaning beneath them. These are typically the deepest cabinets, often reaching countertop-height.
They may come with built-in drawers and shelves, making them a great way to store a variety of items.
Wall cabinets are mounted directly to the wall and offer a great way to add additional storage above counters and appliances. These cabinets often reach from the floor to just below the ceiling and can be shallow or deep depending on the items that need to be stored.
Wall cabinets can come with built-in shelving and open doors.
Tall cabinets, also referred to as pantry cabinets, are typically very deep and go from the floor to the ceiling. These cabinets can come in many sizes, and are meant to provide additional storage for infrequently used items.
Pantry cabinets often feature vertically-positioned shelves and open doors.
In addition to the above mentioned types of cabinets, there are also specialty cabinets such as Lazy Susan and open-front cabinets, which can provide additional storage and organization options in the kitchen, bathroom and other areas of the home.
How deep are cabinets that sit on countertop?
Cabinets that sit on countertop can be made in a wide variety of depths. The most common depths for countertop cabinets range from 15 to 24 inches, with 15- and 16-inch depth cabinets typically used for spaces with shallow countertops and 18-inch depth cabinets often used in kitchens or larger spaces with deeper countertops.
The overall depth of the cabinet can also be influenced by factors such as the installation type (i. e. whether it is a surface mount or a recessed cabinet), the height of the countertop and any overhangs, the type of hardware being used, and the size of the cabinet.
When determining how deep your cabinets should be, it is important to measure your countertop to get an accurate measurement to ensure the bottom of the cabinetry will fit flush to the countertop.
What do you call a cabinet without doors?
A cabinet without doors is often referred to as an open cabinet or a storage cabinet. This type of cabinet is usually used for storing various items since it allows for easy access. Open cabinets can also be great for displaying items, such as books or houseplants.
What is a plinth in a kitchen?
A plinth in a kitchen is a horizontal base structure along the floor that provides support and stability to the kitchen cabinets and other components installed at a height above the ground. Generally, a plinth is made of wood and is attached to the floor along its length and breadth giving it a robust look and feel.
In terms of height, it is usually kept below the countertop to ensure that there are no gaps in the kitchen where creatures, such as cockroaches, can hide and breed. In addition, it also provides extra support for the cabinets, making them sturdier and capable of holding heavy items without wobbling or shaking.
It further helps to level the kitchen cabinets in case the main floor has variations in height due to unevenness or other factors. All in all, a plinth in a kitchen serves as a support framework for the kitchen, allowing it to look aesthetically pleasing while providing the necessary support to all the kitchen cabinets installed in the kitchen.
What is a kitchen unit cornice?
A kitchen unit cornice is a thin strip of decorative material placed around the top of cabinets or built-in units in a kitchen. This strip of material adds a decorative element to the kitchen, often helping the room look more finished and put-together.
Generally, kitchen unit cornices are made from PVC and match the cabinets, in both color and style. It is commonly used around the top of cabinets to hide any uneven edges or to make it look as though there is a built-in unit rather than individual pieces.
Some kitchen unit cornices are also used to mask any pipes or other wall fixtures that may not be attractive to look at.
What is the function of plinth?
A plinth is a structural piece of a building that supports and elevates a structure, such as a column, statue, or other architectural element. Often made of stone, concrete, brick, or other strong materials, a plinth provides the essential foundation required for these architectural features.
In many cases, a plinth may even be designed to serve as a decorative element, rather than a strictly structural one. Plinths may also be used to tie together contrasting building materials, offering a structural and aesthetic solution to blend disparate elements.
Generally, a plinth supports one of three main categories of architectural elements: free-standing objects, such as statues and columns; wall-mounted components, such as fireplaces and window frames; and clustered elements, such as archways and arches.
The plinth’s size and shape depends on the element it’s supporting and the amount of weight the plinth must bear. For example, a plinth may be large and square, to support a heavy marble column, or it may be much smaller to support a slender metal sculpture.
Plinths may also have triangular, oval, or round shapes, as needed for the structure being supported. A plinth should be made of high-quality materials so as to last for many years without showing signs of weakening or damage.
To summarize, the primary function of plinths is to provide architectural support, stability, and elevation to a structure such as a column, statue, or other element. Plinths are made of strong, long-lasting materials, and they come in a variety of sizes and shapes.
By offering structural and aesthetic solutions to blend together contrasting architectural elements, plinths help create a unified look for any building.
Why do kitchen units have plinths?
Kitchen units have plinths for a few reasons. Primarily, they help to keep the kitchen evenly balanced and stable. They help to add extra strength to the kitchen units and are often used to attach the units together, which can be done either by screws or with adhesive.
Additionally, plinths can be used to hide any gaps between the floor and the kitchen units, they can also help to protect the units from accidental bumps or knocks. Furthermore, plinths can be used to add an extra aesthetic appeal to the kitchen, as they are available in a range of finishes and colors to match the rest of the room.
How do you fit a kitchen plinth?
Fitting a kitchen plinth is a relatively simple process. Before you begin, make sure you have the appropriate tools and materials on hand, including suitable screws and a set square.
First, assess the area and determine whether there is sufficient space for the plinth. You may need to trim the plinth if necessary. The plinth should be measured against the base unit and marked with a pencil so you know where to cut.
Once trimmed, the plinth should fit snugly against the base unit.
Next, mark the height of the plinth against the base unit. Using a spirit level, ensure the plinth is straight and level.
Once everything is in place, secure the plinth to the base unit using suitable screws. Make sure the screws are placed firmly within the material to ensure a good hold.
Finally, check the entire kitchen for a secure fit and make any necessary adjustments. Once all adjustments have been made, the kitchen plinth is ready to be used.
What are high kitchen cabinets called?
High kitchen cabinets are typically referred to as upper cabinets, wall cabinets, or wall units. These cabinets typically range from 900-1200mm in height, and are used to store items that are used less frequently, such as commercial appliances and cookware.
Upper cabinets generally come in two or three sections and are typically mounted above the countertop. They are also available in a variety of sizes, materials, and styles. Some upper cabinets are designed for corner placement, while others can be mounted flush against the wall.
Wall cabinets usually have doors and shelves inside, allowing for storage and organization of items. Wall units can include things such as range hoods, warmers, and display cases, and typically come in more specialized sizes and styles.
How do I identify my cabinet model?
Identifying your cabinet model can be a tricky task, particularly if you don’t know the manufacturer or if the labels or tags have been removed. Nonetheless, here are a few steps you can take to help with the identification process.
First, examine the cabinet closely. You may find some clues on the drawer pulls, handles or hinges, as most manufacturers place their label or logo on these items. If they have been replaced, you can take measurements and compare them to other cabinet handles you find online.
Pay close attention to any visible joints and design features, such as paneling, arches or recessed shapes, as these can differentiate different models.
Next, measure the outside dimensions of the cabinet. You can compare existing measurements with manufacturers’ specifications. Look for any identifying tags or labels that may have been placed on the back of the units.
If all else fails, contact the local professional who installed your cabinet to ask for assistance in determining the cabinet model.
Lastly, you can search online for online forums to discuss your cabinet and its model. You can post pictures and measurements, along with your questions. Generally, others with similar cabinets will respond with helpful advice and model information.
What is a b33 cabinet?
A b33 cabinet is an enclosed cabinet specifically designed to house a network of data and communications equipment. It is typically made of robust materials such as steel or aluminum and features both cooling and power options that facilitate efficient, safe operation of the components housed within it.
Additionally, b33 cabinets are often constructed with security measures such as lockable doors and anchoring systems to protect the network components from unauthorized access. The design of the b33 cabinet allows it to be used in a variety of locations such as company offices, data centers, and communication closets.
Its versatile design offers a degree of expandability, allowing network administrators to add and remove components as the needs of the business grow and change. In this way, it provides a cost-effective and efficient solution for businesses to upgrade and maintain their networks.
How do you use a ledger board for cabinets?
Using a ledger board to install cabinets is a fast and effective way to install new cabinetry in a kitchen, bathroom, or laundry room. To do so, start by measuring the walls and marking the desired height of the cabinetry.
Once these measurements are established, locate where the ledger board will be fastened. If the cabinets will be joined together, use a level to measure between two points, making sure the ledger board is perfectly straight.
Once the positions of the ledger boards are determined, secure them to the wall with a hammer and screws. Be sure to pre-drill the holes in the board to avoid splitting it when the screws are hit.
Next, install the cabinets onto the ledger board. Line up the cabinets with the board before fastening them into place with screws or nails. Pay special attention to the center of the cabinets, making sure it lines up with the center of the ledger board for a snug fit.
Continue with all other cabinets, finishing with the end cabinets. If the cabinets have adjustable legs, you may need to adjust them once all cabinets are in place.
Once the cabinets have been firmly secured to the ledger board and each other, install the crown molding to give the cabinets a finished look. Don’t forget to fill any screw holes with putty and touch up any paint or wall covering that may have been disturbed by the installation.
Finally, ensure all hardware is tightened and the cabinets are level and securely in place. Check the doors to be sure they open and close properly. With these steps, you can successfully use a ledger board to install cabinets.
What is a cabinet on the floor called?
A cabinet on the floor is usually referred to as a base cabinet. A base cabinet is a type of cabinet that is installed directly on the floor. They are typically made of wood, particle board, or other durable material and are designed to provide extra storage space in kitchens and bathrooms.
Base cabinets can come in both stock sizes, meaning that they are pre-made and the dimensions are fixed, or custom sizes which can be tailored to fit a specific area. Base cabinets can feature doors, drawers, and adjustable shelving to make storage more efficient and convenient.
Base cabinets are a great addition to any kitchen or bathroom and can help maximize storage space.
How do you hang a hanging cabinet on the wall?
Hanging a cabinet on the wall is a great way to add extra storage and style to your room. Here are the steps for properly hanging a hanging cabinet on the wall:
1. Determine the location of the cabinet on the wall. Ensure that the area is structurally sound.
2. Gather the necessary tools to install the cabinet. This usually includes a stud finder, level, drill, drill bits, anchors, and a hammer.
3. Locate the wall studs using a stud finder and mark them on the wall.
4. Place the cabinet onto the wall, lining it up with the studs. Use a level to ensure that the cabinet is level. Mark the placement on the wall.
5. Predrill holes into the wall and the cabinet where needed.
6. Use the anchors to anchor the cabinet securely into the wall.
7. Drill the screws into the hole and into the anchors to secure the cabinet.
8. Allow the cabinet to hang securely before placing any items into it.
How do you level cabinets to hang?
Hanging cabinets can be a tricky task, but with careful planning and the right tools you can make sure that your cabinets are level and properly installed. Before you begin, make sure you have all the necessary tools, such as a hammer, level, stud finder, drill, and screws.
First you need to determine the best way to secure your cabinet to the wall. If you are dealing with a studded wall, you can use the stud finder to locate the studs and then use screws to secure the cabinets.
If you are working with a drywall, you will need to use wall anchors in order to properly mount the cabinets.
Once you have determined the appropriate way to secure your cabinet to the wall, you will need to mark the spots where you will be drilling screws into the wall. Take the time to make sure that the marks are level, as this is key for a good installation.
Next, you can either use a drill to secure the cabinet to the wall, or if you don’t have a drill, you can use hammer and nail to secure the cabinet to the wall. Whichever way you choose, make sure that you pre-drill the hole first.
Once the hole is drilled, you can insert the screw and tighten it.
Finally, use a level to make sure the cabinet is level and secure. If you find that your cabinet is still not level, you may need to make adjustments to the screws or wall anchors.
Overall, hanging cabinets can be a tricky job, but with careful planning and the right tools you can ensure that they are secured and level. Good luck!
Do you install upper or lower cabinets first?
When installing cabinets, it is important to install the upper cabinets first, as the lower cabinets will provide stability for the upper cabinets. Additionally, by starting with the upper cabinets, it is easier to measure for the countertops, as the lower cabinets will be of a standard height.
When installing the upper cabinets, the first step is to level and secure the wall to which the cabinets will be mounted. Then, you will use shims to create a level base for the cabinets. The next step will be to fasten the upper cabinets to the wall.
You should use lag screws or bolts driven into studs in the wall.
Once the upper cabinets are installed, it is time to install the lower cabinets. Again, be sure to level and use shims as needed. Measure your countertop to ensure the lower cabinets will be mounted at the correct height.
The cabinets should be fastened with screws or bolts into the wall.
Many times, a filler strip will be needed to fill any space between the wall and the end of the cabinet. Measure and cut the strip accordingly and secure it in place.
Finally, you can install the countertop of your choice. Be sure to fasten the countertop to the cabinet securely.
In summary, it is important to install the upper cabinets first to provide stability for the structure and to allow adequate measurement for countertops. Follow the above steps to ensure your cabinets are properly secured to the wall and your countertop is installed securely.
Should kitchen cabinets be flush with wall?
In general, kitchen cabinets should be flush with the wall in order to create a sleek look that is both modern and visually appealing. This is because the flush style allows the cabinets to blend in seamlessly with the other elements of the kitchen design and ensures that the eye isn’t drawn to any particular elements.
Additionally, by having the cabinets flush with the wall, this allows for a smooth, uninterrupted surface over the cabinets. This makes cleaning easier, as dust and dirt are less likely to settle in any join lines or between the cabinets and wall.
Additionally, if you choose to add a backsplash to your kitchen, having the cabinets flush with the wall will create a seamless look that is uninterrupted.
Overall, there are many advantages to having kitchen cabinets flush with the wall and in many instances this is the ideal choice for creating a contemporary and aesthetically pleasing look.
How do you level and install kitchen cabinets?
When it comes to leveling and installing kitchen cabinets, there are several steps that need to be followed to ensure that the job is done correctly. First, make sure to thoroughly measure the room and check the existing walls for plumb (vertical straightness) and level (horizontal straightness).
Once you have determined that the walls are plumb and level, the next step is to choose the appropriate location for the cabinets. Consider the location of lighting and plumbing, as these can impact the overall look of the kitchen.
Next, start by anchoring the corner or base cabinet to the wall, making sure to level and shim for any unevenness in the walls. After the corner cabinet is installed, set the next cabinet parallel to the anchored cabinet, making sure that it is level and shimming it in place if necessary.
Measure the space between the two cabinets and then cut a filler strip of the same thickness to fill in the gap. Continue with this process until all the cabinets have been installed.
Next, it is time to install the cabinet doors. Make sure to level each hinge correctly and then attach it to the corresponding door. Once all the cabinet doors have been attached, cut off any additional hinge material and sand and paint it if necessary.
Lastly, attach the drawers and handles, completing the installation of the cabinets.
By reviewing the above steps and being attentive to detail, kitchen cabinets can be leveled and installed properly.
How level do kitchen cabinets need to be?
In order for kitchen cabinets to be properly level, it is important that they are installed with precise measurements and aligned correctly. Each cabinet should be leveled in the vertical and horizontal planes independently, with a spirit level or other tool.
Vertical leveling is important for ensuring that the cabinet carcass is properly supported, while horizontal leveling is necessary for preventing any doors from becoming inoperable due to misalignment.
Additionally, the tops of all cabinets should be leveled within a 1/4 inch in both directions to ensure uniformity within the space. It is also important to check for any unevenness across the widths of cabinet frames to confirm that they are properly squared, as this can affect how the cabinetry looks.
When all measurements are taken and ensured, cabinets should be securely fastened and away from any impacting stresses. By taking the time to properly level cabinetry, it will help ensure that your kitchen will look great, offer functionality, and can last for years to come.