Master Locks claim to be “the world’s best-known laminated padlock for its strength and quality,” so cutting one isn’t easy. The most effective way to cut a Master Lock is with a bolt cutter. Bolt cutters are large, powerful tools specifically designed to cut through metal, and are available at most hardware stores.
Additionally, some padlock shims and key turners can be used to pick Master Locks, although the process is often complicated and requires a great deal of skill. An angle grinder with an abrasive metal-cutting wheel may also be used to cut Master Locks, however it is important to exercise great caution as the sparks and flying metal pieces created by a grinder can cause serious harm.
Finally, it’s important to note that it is illegal to tamper with a lock that does not belong to you, so you should take extreme care if choosing to use one of the methods described above.
What size bolt cutters do I need to cut a Master Lock?
The size bolt cutter you need to cut a Master Lock will depend on its size. If you have a padlock around 3/8″ in diameter, you will need something around 10″ in length. If you have a smaller padlock, say 1/4″ in diameter, you may be able to get away with 6 to 8 inches.
Anything larger, like a 5/16″ padlock, is going to require an 11″ – 12″ bolt cutters. It is important to note that bolt cutters can weaken the shackle strength so you want to make sure that you only use bolt cutters when absolutely necessary.
If you are unsure of the size of the lock, it is recommended to take it to a locksmith for safe keeping.
How do you break a master lock without a key?
Breaking a master lock without a key is possible, but it can be difficult, time-consuming and may cause damage to the lock. Including picking, drilling and using a shim. Picking is the most practical approach and can usually be done with a standard tension wrench and pick rake.
To do this, insert the tension wrench and apply firm tension to the shackle. For best results, use a one-handed picking motion that applies tension with one hand and moves the pick with the other. To avoid damage, take care to apply minimal rotational pressure as you feel for the pins inside the lock.
More extreme methods such as drilling or using a shim require more specialized tools and knowledge, and can cause significant damage to the lock so they should only be used as a last resort. Drilling requires a high-speed drill bit and must be done carefully to avoid damaging the internal components of the lock.
Using a shim requires specially made shims that are inserted between the shackle and body of the lock. This tool may be able to pull the shackle back, allowing the lock to open, however shims designed for master locks can be difficult to find.
What is the hardest padlock to cut?
The hardest padlock to cut is likely the Abloy Protec2 CLIQ. This padlock is made of solid steel, providing superior strength. It is almost impossible to cut with traditional tools, such as bolt cutters or an angle grinder.
The unique construction of the lock also prevents drilling, and the cylinders inside are resistant to picking. This padlock is extremely resilient to physical attack methods, making it one of the most difficult locks to break.
How hard is it to cut a masterlock?
Cutting a Masterlock can be a very difficult and time consuming process. It requires the right tools, some physical force, and knowledge of the right technique. The most common and efficient way to cut a Masterlock is to use an angle grinder.
This requires using a metal cutoff wheel to cut through the hardened steel shackle. Depending on the size and type of lock this can take up to several minutes, and if the operator is not experienced in the technique the risk of damaging the tool, the lock, and injuring the operator is increased.
What can bolt cutters not cut through?
Bolt cutters are designed to cut through soft metals, like aluminum and brass, and softer metals, such as copper and steel. However, they cannot cut through harder metals, such as hardened steel, stainless steel, and titanium, due to the high amount of tensile strength these metals possess.
Bolts and screws made of these metals cannot be cut with a standard bolt cutter. Bolts cutters are also limited in the types of objects they can cut. They cannot cut through thick cables, rods, or chains, as these require specialty cutting tools.
Highly hard, brittle materials, like concrete, will also require all-purpose shears or concrete cutting discs, as bolt cutters are ineffective when cutting these materials.
Can bolt cutter cut hardened steel?
No, a bolt cutter cannot cut hardened steel. Hardened steel is designed to be extra strong and durable and cannot be cut by a bolt cutter. Bolte cutters are designed to quickly and easily cut through items like soft bolts, padlocks, and other soft components such as those found in electrical wiring, but are not strong enough to cut through hardened steel.
Hardened steel requires a saw, grinder, or drill in order to be cut.
What lock Cannot be cut?
A lock that cannot be cut is one that is made out of a material that cannot be penetrated by cutting tools, such as a lock made out of stainless steel. Most locks can be cut with the right tools, but stainless steel is difficult to penetrate and offers a greater level of security.
Additionally, some locks are designed with an extra layer of protection so that even if the material can be cut, the internal lock mechanism will still be protected. This may include angled cuts, tempered material, or design features that make it difficult to get to the internal mechanisms of the lock.
While it may be theoretically possible to cut a stainless steel lock, it would be exceptionally difficult and time-consuming.
How do you get into a locked padlock?
If you are trying to get into a locked padlock, the first thing you should do is try to pick it, as that is the most common method for unlocking a locked padlock. If you have a small, thin object like a bobby pin, you can attempt to jiggle it in the keyhole to try and unlock it.
You can also use a padlock shim to release the latch. If these methods don’t work, you may need to purchase a lock pick set and try using it to unlock the lock. If that still doesn’t work, you can try using a lubricant like WD40 and see if that helps the lock open.
If none of these methods work, you may need to call a locksmith to have the lock opened.
How do I break a padlock?
In order to break a padlock, there are a few different methods you can use depending on the type of lock you are trying to break. First, you can use a bolt cutter to cut through the shackle of the padlock.
If you don’t have a bolt cutter, you can use a hacksaw to cut through the shackle. Another option is to use a hammer and chisel to break the lock open by chipping away at the lock body. However, these methods are likely to damage the lock beyond repair and should only be used as a last resort.
Finally, if you have an electronic padlock, you can use a universal key to open it. With these options in mind, you should be able to effectively break a padlock.
Is there a chain that Cannot be cut?
A chain that cannot be cut does not exist as no matter how strong a material or metal may be, there is always a tool or material stronger than it. This is due to the fact that anything physical has its limits in terms of strength, hardness and durability.
For example, diamond is considered to be very hard and strong, but even it can be shattered or cut in difficult circumstances. Even when it comes to metals, such as steel, they can be cut with the right tool, such as a cutting torch.
In addition, no matter the type of chain, there is always a cutting tool or material strong enough to break through it. Thus, a chain that cannot be cut does not exist.