There are a variety of cleaning solutions that can be used in place of Bissell’s cleaning formula. For carpets and upholstery, you can use a mixture of warm water and vinegar. Just mix in equal parts of white vinegar and warm water and spray or pour the mixture directly on the fabric or carpet.
You can also use baking soda and water to deodorize your carpets. Simply pour a generous amount of baking soda over your carpet and let it sit for at least an hour. Afterwards, vacuum the carpet thoroughly.
For upholstery, you can create a cleaning solution by mixing 1/4 cup of laundry detergent, 1/4 cup of household ammonia and 1 tablespoon of white vinegar with a gallon of warm water. To use, just pour the mixture over the upholstery and scrub gently with a brush.
Dish soap and warm water can also be used on upholstery. Just make sure to test the solution on a hidden area prior to use. Lastly, for a variety of hard surfaces, including tile and linoleum, a mixture of baking soda and vinegar is a great alternative to Bissell cleaning formula.
To use, just mix 1 cup of baking soda with 1/2 cup of vinegar and 1/2 gallon of warm water and pour it into a spray bottle or bucket. You can then use it to clean the hard surface.
Do you have to use Bissell solution in crosswave?
Yes, Bissell solution is designed specifically to be used in the Bissell Crosswave, providing optimal cleaning and care for your floors. Bissell solutions are specifically formulated to be used with the Crosswave Multi-Surface wet/dry vacuum to provide a deeper clean.
The solutions work in harmony with the Crosswave to lift dirt, grease and grime from your floors, then capture and store it into the Crosswave’s Dirty Water Tank. They are also specially designed to clean your floors without leaving residue, so you can actually see your clean floors.
Plus, the solutions leave a pleasant fresh scent. So it’s best to use Bissell solutions when using your Bissell Crosswave for the best possible deep clean and care.
Can you use other cleaners in a Bissell?
Yes, you can use other cleaners in a Bissell, as long as they are formulated for use with carpet and upholstery. Many carpet cleaning formulas, including those made by other major cleaning brands, are compatible with Bissell machines.
The best way to determine which products are compatible with your specific Bissell is to check the manual that came with the machine or contact the manufacturer directly to find out. It is important to note that some cleaning products can actually damage your Bissell machine, so it is important to always use products made specifically for carpet cleaning machines.
What formula can I use in Bissell crosswave?
Bissell Crosswave Multi-Surface Formula is a specialized cleaning formula designed specifically for use in the Bissell Crosswave Upright Deep Cleaner. This formula is designed to ensure that your floors get the deep clean they need while also protecting them from dirt and residue build-up.
It is safe to use on all sealed hard surfaces, including hardwood, tile, laminate, vinyl, and area rugs. The formula not only cleans, but also provides a protective repellency to help make future cleanups easier.
Additionally, it removes pet odors and leaves your floors with a fresh, clean scent. To use, add one pouch of the Multi-Surface Formula to 16 oz of warm water, and use according to the instruction booklet that comes with the Crosswave unit.
Make sure to wait to use the Crosswave until the formula is completely mixed in with the water and the unit is ready for use.
Can I use Pine Sol in my CrossWave?
Yes, you can use Pine Sol in your CrossWave. The CrossWave is designed so that you can use any multi-surface cleaner, such as Pine Sol, or the CrossWave’s own cleaning formula inside the machine. As long as the pH levels of the cleaning solutions you use are between 7-8, they should be safe to use.
Simply add the Pine Sol to the CrossWave’s clean water tank, adjust the dial on the machine to the desired setting, and you are ready to start cleaning your floors. Be sure to read the instructions on the bottle of Pine Sol to ensure that you are using the proper concentration of Pine Sol for your desired surface.
What cleaning solution is used for the Bissell CrossWave?
Bissell recommends using the Multi-Surface formula that comes with the CrossWave when cleaning surfaces. This formula is effective at cleaning both sealed hard floors and area rugs. It is a combination of detergents, surfactants and specifically selected ingredients that creates a unique formula that quickly breaks up and removes dirt, debris and even pet messes.
It also includes with added scent of Febreze® Freshness to leave your floors smelling clean and refreshed. For best results, use a 1/2 cup of cleaning solution. Make sure the cleaning solution is always mixed properly with water; never pour it directly onto the floor.
To avoid over-saturating your floor, Bissell recommends spot-cleaning, rather than pouring Large amounts of cleaning solution directly onto your floors.
Can I put Pine Sol in my Bissell steam mop?
No, it is not safe to put Pine Sol in your Bissell steam mop. Steam mops are designed to clean with only water, and if you put Pine Sol in the water stream, it could cause corrosion of the internal components and could damage it.
In addition, the harsh chemicals that Pine Sol contains are not safe to use around pets, children, and other family members. For these reasons, it is best to only use clean water in your Bissell steam mop and to not use any chemical cleaning solution.
Can I use bleach in my Bissell carpet cleaner?
No, you should not use bleach in your Bissell carpet cleaner. Bleach is a powerful and corrosive chemical that can damage the components of your machine and potentially ruin your carpets. Furthermore, it can be a health and safety hazard if it comes into contact with your skin or eyes, or is inhaled.
It is also not recommended to use bleach on carpets as it can cause discoloration or damage. If you need to get stains out of your carpets it is best to use a Bissell carpet cleaning solution specifically formulated for your machine.
These solutions are designed to be safe and effective, and won’t damage your carpets or the components of your Bissell carpet cleaner.
What can I put in CrossWave?
The CrossWave is designed to clean sealed hard floors, including tile, vinyl, linoleum, laminate, and sealed hardwood floors. You can safely use the CrossWave to vacuum and wash any of these floor types at the same time.
To use the CrossWave, fill the tank with warm water and the cleaning solution of your choice. Suitable cleaning solutions include specifically-formulated floor cleaners, or a mixture of dish soap and water.
After the tank is full, you can choose the cleaning mode to use and the CrossWave will start to clean your floor. Once it is done, simply pull out the dirty water container and dispose of the waste water.
Why does my Bissell CrossWave leaving streaks?
Some of the most likely causes include incorrect cleaning solution to water mixture, a dirty or clogged water tank filter, incorrect water tank set up or placement, and inadequate cleaning technique.
First, you should double-check that the cleaning solution to water mixture is correct. Bissell CrossWave instructions recommend mixing 1:4 parts of cleaning solution to water. If the solution to water ratio is off, the cleaning solution won’t activate properly and can leave streaks in its wake.
The next step is to identify if the water tank filter is dirty or clogged. Any dirt or debris build up will throw off the solution before it can activate so make sure to clean or replace the filter regularly.
Further, it’s important to ensure the water tank is correctly set up and positioned. The water tank must be placed on the floor with the air hole facing towards the front of the CrossWave otherwise it won’t activate correctly and leave streaks.
Finally, inadequate cleaning technique could also be a factor. You may not be pushing the CrossWave back and forth or pushing down hard enough and thus, not allowing the cleaning solution to activate and do its job properly.
Try increasing your pressure or frequency when scrubbing to see if that helps.
Before you troubleshoot further, make sure to check these factors as they are likely the root cause of streaks being left behind.
Can I shampoo my carpet with Fabuloso?
No, it is not recommended to shampoo your carpet with Fabuloso. Fabuloso is a multi-purpose cleaning solution intended for use on hard, non-porous surfaces like tile, sinks, and countertops. On carpets and other soft surfaces, Fabuloso may harm the fabrics or color, and could also leave a sticky residue.
If you are looking to deep clean your carpets, you may want to look into a conventional carpet shampoo or a steam cleaner. When using products that contain bleach or ammonia, it is important to read and follow the instructions carefully and make sure to properly ventilate the area.
How do you make your own floor cleaner?
Making your own floor cleaner is a great way to save money while still keeping your floors looking clean. To make a non-toxic, budget-friendly floor cleaner, you will need white vinegar, water, and essential oils such as lemon or tea tree.
Start by mixing equal parts white vinegar and water in a spray bottle and add several drops of essential oils. Shake the bottle to mix the solution and then spray it directly onto the floor surface. Let the solution sit for a few minutes and then mop the floor with a clean mop.
Change the water as needed to avoid re-dissolving dirt. If your floors are particularly dirty, you can let the solution sit for 5 minutes before mopping. You can also add a few tablespoons of baking soda to the spray bottle to help cut through grease and grime.
For a more powerful cleaner, you can also use castile soap instead of essential oils. Be sure to read the labels on the bottles because some varieties of castile soap are not suitable for use on some types of floors.
Finally, after mopping, use a dry mop to dry the floors and help keep dirt from sticking and build-up from occurring.