The numbers on a Husqvarna chainsaw refer to various measurements and correspond to the type of bar and chain being used. The first two numbers correspond to the length of the guide bar, with the first number indicating the length in inches and the second number indicating the length in eighths of an inch.
For example, a 16 inch chainsaw would read 16-0, while an 18 inch chain saw would read 18-0. The second two numbers represent the chain pitch and gauge. The pitch indicates the size of the drive links, which connect the chain to the bar.
Pitch is typically 3/8″ or. 404″. The gauge, or drive link thickness, is typically. 050″.
Additionally, some Husqvarna chainsaws have a model number followed by an X, such as 450X. This indicates that the chainsaw has been optimized for use with Husqvarna’s X-Cut chain which is designed for improved performance and greater efficiency.
How are Husqvarna chainsaw bars measured?
Husqvarna chainsaw bars are measured differently depending on the model of chainsaw. Generally, they are measured in inches, with sizes ranging from 12 to over 20 inches in length. The length of the bar is calculated by measuring from the tip of the nose to the center of the sprocket hole.
It is important to note that this measurement counts the bar only and does not include the drive links of the chain. When shopping for a chainsaw or replacement bar, make sure you measure the correct size of the bar to ensure a proper fit for your Husqvarna chainsaw.
Additionally, it is important to choose the right type of bar for your specific saw, as there are different styles of bars for use with different saws. If you are unsure what type of bar you need, it is best to consult a Husqvarna professional to ensure you get the right bar for your saw model.
How many horsepower is a 372XP Husqvarna chainsaw?
The 372XP Husqvarna chainsaw has a high power-to-weight ratio, making it exceptional for professional users who require maximum power to weight ratio in a professional chainsaw. The 372XP is powered by a 2-stroke engine that provides the saw with a maximum power output of 6.
38 Horsepower (HP). It has a cylinder displacement of 74.4 cm³, making it suitable for a wide range of tasks. It is equipped with an inertia activated chain brake for added safety and a two-stage air filtration system, with service intervals that can be monitored through the built-in hour meter.
The 372XP is a very powerful and efficient chainsaw, ideal for users who require professional results and reliability.
How do I tell what year my Husqvarna chainsaw is?
To determine the year of your Husqvarna chainsaw, you will first need to identify the model number. The model number is usually printed on a label located on the starter side of the motor. Model numbers usually begin with “362” and a following digit that indicates the engine series.
After identifying the model number, you will then need to look up the corresponding model year. Husqvarna has a model year chart that you can refer to. The chart has a list of model numbers and their correspondingmodel years.
Refer to this chart to determine the approximate year of your specific chainsaw model.
When was the Husqvarna 50 chainsaw made?
The Husqvarna 50 chainsaw was first manufactured in 1957 by the Swedish company Husqvarna AB. Husqvarna began making saws in the 1800s, with the first one-man saw debuting in the 1920s. The Husqvarna 50 was an upgraded version of the earlier “Summit 5” saw, which had been in production since 1948.
It featured a two-stroke engine and a completely redesigned body with a built-in air intake and piston cooling system. The saw was built with a one-piece crankcase, a cylinder cover and bottom cover with a flywheel.
It also came with a heavy-duty cylinder base and chain brake, as well as a chain tightening tension and oiling system. The Husqvarna 50 was an immensely popular saw, with over 750,000 units sold between 1957 and 1997.
How many cc is Husqvarna 61?
The Husqvarna 61 chainsaw has a European version with a 70.7cc engine, and a North American version with a 61.5cc engine. The European version has a better power-to-weight ratio and improved torque due to a larger displacement, but the North American version is still considered a powerful chainsaw for logging, felling and clearing.
How do you decode a Husqvarna serial number?
Decoding a Husqvarna serial number is fairly straightforward. First, locate the serial number on the unit – for a lawn mower or other outdoor power equipment, it will be located on a sticker on the underside or back of the machine.
The serial number will typically start with either two letters or two numbers which denote the year and month of manufacture, and will continue with numbers which uniquely identify the individual unit.
The first two letters imply the following alphabetical order: A (January), B (February), C (March), D (April), E (May), F (June), G (July), H (August), J (September), K (October), L (November) and M (December).
The first two numbers, typically ranging from 11 to 17, signify the year of manufacture. For example, an M12 serial number indicates the mower was manufactured in December of 2012. Subsequent digits identify the machine model, then the unique serial number itself.
By decoding this serial number, you can determine exactly which model Husqvarna machine you have, as well as when it was manufactured.
What year is Husqvarna YTH18542?
The Husqvarna YTH18542 was released in 2015. This 42″ lawn tractor is great for cutting grass, with a robust 18.5 HP Briggs & Stratton Intek engine. It is equipped with a hydrostatic transmission, a foot pedal operation, and a cutting deck with a 6-position manual deck adjustment.
The cutting area is also adjustable with a cutting height between 1.5″ and 4.2″, allowing you to mow larger lawns with the same top level results. It also offers a mow-in-reverse feature for safer operation and easier maneuvering.
Other features include a wide turning radius, an anti-scalp wheel, and a cup holder. This model is no longer in production, but genuine OEM parts are available to keep this reliable machine in service for years to come.
How do I contact Husqvarna?
You can contact Husqvarna by calling their main customer service line at 888-487-7297. Customer service representatives are available Monday through Friday, 8am to 8pm Eastern Standard Time. You can also email Husqvarna at customersupport@husqvarnagroup. com.
Additionally, you can submit questions to their online contact form found on their website. For any urgent inquiries, you can contact Husqvarna through their live chat, which is accessible during their customer service hours.
Do all bars fit all chainsaws?
No, bars and chainsaws are not interchangeable and not all bars fit all chainsaws. Bars and chainsaws come in different sizes and models, and different types of bars and chainsaws require specific components to be compatible.
Generally, bars and chainsaws are designed to work together, but the size and type must match up in order for them to work together. Chainsaws are equipped with specific drive links that must match the pitch of the bar’s guide groove, and similarly, the length and width of the bar must match the overall size of the chainsaw.
Additionally, some chainsaws use special designs or feature specific components that require special components and bars in order to be compatible. If a wrong type, size, or design of bar is selected, it will not fit the chainsaw and may even damage it.
It’s important to select the right bar the first time, as even finding a similar bar may be difficult, as some ads sound like they may fit, but don’t. Make sure to measure and compare the bar and chainsaw dimensions before making a purchase.
What lengths do chainsaw bars come in?
Chainsaw bars come in a wide range of lengths, typically ranging from 10″ to 36″, but can sometimes be longer. Most chainsaws can accommodate bars sized between 10-20″, while longer, heavier-duty saws are designed to fit bars ranging from 20-36″.
The larger, professional-grade saws may use even longer bars of up to 72″ in length. The size of bar you need depends on the type of work you’re doing and how much energy you plan to put behind it. Shorter bars are more maneuverable and better for finer tasks, while longer bars provide more power and require less effort.
That being said, a longer bar requires more chain tension and can be more difficult to maneuver. Ultimately, choosing the right bar length will depend on your work and the specific saw you’re using.
Can I put a different size bar on my chainsaw?
Yes, you can put a different size bar on your chainsaw, but it typically depends on what type of chainsaw you have. Different sized chainsaws have different sizes of bars and different lengths of pinch bolts that need to be used.
Generally speaking, you’ll want to match the bar length to the CC rating of your chainsaw. Make sure to consult your chainsaw’s user manual to determine the correct size of the bar and the proper technique for changing it out.
Also, take necessary safety precautions and make sure the chain is properly tensioned before restarting the saw. If you are uncertain of the right size chain or how to properly install or tension it, it’s best to consult with a professional or consult your chain saw user manual.
How often should you replace chainsaw bar?
The frequency of replacing your chainsaw bar will depend on the type of bar you have and how often it is used. Generally, when a chainsaw bar becomes worn or nicked, it should be replaced. If you use your chainsaw on a regular basis and are making deep cuts into hardwood, you should replace your chainsaw bar every 2-3 months to ensure it is always in top working condition.
If you are only using your chainsaw occasionally and for lighter-duty cutting, then you may be able to get away with replacing it every 4-6 months. Additionally, if you notice any cracks or deep dents in your chainsaw bar, it is important to replace the bar immediately.
By properly taking care of your chainsaw and replacing the bar regularly, you will ensure it is always working safely and efficiently and provide many years of use.
What do chain numbers mean?
Chain numbers are used to identify a particular type and size of chain. The number indicates the pitch of the chain, which is the distance between two identical links of a chain, as well as the style of link and size of the link.
Chain numbers typically consist of two or three digits, with the first digit indicating the pitch, followed by one or two letters to indicate the type and size of link; for example, a chain number of ’25-1′ would indicate a pitch of 25 and a size of ‘1’.
Chain numbers can also indicate the type of material used, as well as the type of finish.
Chain numbers are important because they determine the compatibility of the chain when being used in different pieces of machinery. If a machine is designed to use a certain type and size of chain then they must match.
Similarly, chains that are going to be used together must also match, regardless of their application. Chain numbers are a quick and efficient method of identifying the correct type of chain and ensuring that the correct compatibility is achieved.
Are Oregon chainsaw bars universal?
No, Oregon chainsaw bars are not universal. Oregon designs and manufactures a variety of chainsaw bars, each of which is tailored to specific powerhead models and bar lengths. Chainsaw bars from other brands may be compatible with Oregon chainsaws to some degree, but an Oregon bar is always the best fit and will provide optimum performance and safety.
Oregon bars are manufactured from quality materials and built to exacting standards, ensuring maximum chain performance and durability. To ensure the best performance, compatibility and safety, it’s best to purchase an Oregon chain and bar that are designed and manufactured specifically for your chainsaw model.
What Oregon chain fits a Husqvarna 435e?
A popular Oregon chain that is compatible with a Husqvarna 435e chainsaw is the Oregon 21LPX068G Laneory Prime Chain. This chain is designed for lightweight chainsaws and offers a low-kickback design for improved safety.
The 21LPX is a professional-grade, low-kickback saw chain that is designed to provide smooth cutting performance and long life. The 21LPX also features full chisel cutters which drive deeper into the wood for maximum cutting performance.
Additionally, the Oregon 21LPX068G provides a stable top-plate design that helps reduce physical effort when cutting through wood or other materials. All of these features make the Oregon 21LPX068G Laneory Prime Chain an excellent choice for the Husqvarna 435e chainsaw.
What chain do I need for 450 Rancher?
If you’re looking for a chain to fit a Honda 450 Rancher, you’ll need an O-ring chain with 76 links. Honda designed the 450 Rancher to use size 325 O-ring chains, which feature 1/4″ pins and 1/8″ plates.
When shopping for an O-ring chain, be sure to check that the part number matches the chain length and that of your 450 Rancher before you purchase it. The chain length will be listed both in inches and in links, so you’ll want to make sure the link count matches your bike.
As for the O-ring chain, it should match the same size as the chain length specs for the Rancher, or size 325. Finally, be sure to also purchase a sprocket for the chain. Most manufacturers include a sprocket with their chains, but you will want to make sure that the sprocket is compatible with your Rancher before you show it.