The numbers on a chainsaw chain describe the pitch, gauge, and drive link count of the chain. Pitch is the size of the chain’s drive links and can be 1/4”, 3/8”,. 325”, or. 404”. Gauge is the thickness of the drive link and can be.043”,.
050”,. 058”,. 063”, or. 325”. The drive link count is how many drive links the chain contains, normally ranging from 56 to 68. All of these numbers are typically stamped on the drive link and can be found when you separate the chain.
It’s important to choose the right chain for the saw you are using because an incorrectly sized chain won’t fit the sprocket or bar. If you’re unsure of the type of chain you need, you can find everything you need to know in the user manual for your chainsaw.
How do I know what size chain is on my Stihl chainsaw?
The size of the chain on your Stihl chainsaw can usually be determined by looking at the blade. You can usually see the size of the chain stamped onto the side of the blade near where the end of the chain meets the blade.
If this is not visible, then you can take a few measurements to identify the size. The size of a Stihl chain is determined by its pitch, gauge, and sometimes the length of the drive link. The pitch is the distance in inches between drive links, and the gauge is the size of the drive link i. e.
1/4 inch or 3/8 inch. Some Stihl saws also have a specific drive link length which helps to identify the size. To measure the size yourself, you can use a ruler to measure the pitch and a caliper or micrometer to measure the drive link diameter.
Once you have your measurements, you can compare them to the sizes listed in the Stihl chainsaw manual or website to identify the correct size.
What size file do you use on a 3/8 chain?
The appropriate size file to use on a 3/8 chain will depend on the particular chain you plan to sharpen – it can vary between different models and manufacturers. Generally speaking, the best option is to find the file size listed in your particular chainsaw’s manual.
If that is not available, a good rule of thumb is to use a 5/32 inch round file for sharpening a 3/8 inch chain. It is important to use the correct size file in order to ensure your chain remains sharp and well-maintained.
It is also wise to inspect the chain beforehand to verify there are no irregularities or defects that may require different or special tools and techniques. And as always, be sure to wear proper safety gear whenever sharpening or challenging your chainsaw.
What size chain goes on Stihl ms170?
The Stihl MS170 chainsaw includes a 16-inch bar and chain. The chain is a 3/8Inch Pitch Picco Micro Mini 3 (PMM3) chain with a. 043 gauge. This chain is specifically designed for the Stihl MS170, providing efficient operation, low kickback characteristics and good cutting performance.
It is important to use the correct size chain for the Stihl MS170 as using the incorrect size can invalidate the warranty, be damaging to the chainsaw and may result in injury. For safe and effective operation the chainsaw needs to be installed with a replacement chain that matches the size of the existing chain.
What is the difference between the yellow and green Stihl chain?
The main difference between the yellow and green Stihl chain is the type of components they are made up of. The yellow chain is made up of conventional components that have a thicker round design, while the green chain is made up of more modern components that have a square-cut design.
The yellow chain is typically more suitable for general pruning and cutting projects, while the green chain is optimized for professional users with heavier and more powerful saws. Additionally, the green chain has better cutting performance and can be used for more demanding jobs such as hard woodcutting, milling, and landscaping.
Do Oregon bars fit Stihl saws?
Yes, Oregon bars can fit many different Stihl saws, depending on the model and size. Oregon bars are designed with a universal interface that is compatible with several saws, including the 020T, 021, 023, 025, MS 170, MS 180, MS 251, and MS 251C models.
The pitch and gauge can also vary depending on the model, as these are two of the most important considerations when selecting a compatible bar. Oregon bars are often made with high-quality materials, such as solid-grade alloy or laminated construction, which allow them to last longer and provide a better cut.
Furthermore, Oregon bars come with several features that make them easy to use and maintain, such as a bearing-free nose, wide-groove drive sprocket, and bumper spikes for added stability. Oregon bars are also compatible with many different chains, making them a great choice for Stihl saws.
Can I put a 20 inch bar on MS250?
Yes, you can put a 20 inch bar on a Stihl MS 250 chainsaw, which has a power output of 2.2 kW. The length of the bar is dependent on the type of cutting tasks you will be doing with the chainsaw. The suggested bar length for the MS250 is 16 – 18 inches.
However, with the increased power output of the MS250, you can safely use a 20 inch bar if you need to make longer cuts. If you install the 20 inch bar, you should also make sure you are using the proper chain and cutting components for a 20 inch bar.
Lastly, using a longer bar will require more frequent sharpening of the chain, as the longer the bar, the more quickly the cutting components will wear out.
How do I know my chainsaw chain size?
In order to determine the size of your chainsaw chain, you will need to look at the information provided in the owner’s manual of your chainsaw. Most owners manuals contain all the necessary information needed to determine the size of the chainsaw chain.
Additionally, you can check the labels on the sides of the chainsaw bar, which should indicate the size of the chain. If you still cannot determine the size of your chainsaw chain, you should consult a professional who is experienced in chainsaws to ensure you are purchasing the correct chain size for your specific saw.
How do you read a Stihl chain?
Reading a Stihl chain is a relatively simple process that requires a few key factors in order to ensure you have the right chain for your needs. First and foremost, you will need to locate the pitch.
The pitch is the distance between three consecutive drive links and is typically a number associated with the chain such as 3/8”P,. 325”P or. 404”P. Next, you will need to determine whether your chain is a skip or full skip chain.
Skip chains have a reduced number of drive links resulting in a shorter cutting circle and a reduced weight for the saw. Lastly, you will need to identify the gauge of your chain. This is the width (depth) of the drive links and is usually a number such as.050”,.
058” or. 063”. Once you have determined all these factors, you can search for the relevant chains on chainsawsdirect. com and purchase the right chain for your Stihl saw.
How do I know what number my chain is?
To determine what chain number your bike is equipped with, the easiest way is to look at the chain itself. If it’s a 6- or 7-speed chain, it should have visible ridges between the chain links, indicating which type of chain it is.
A 6-speed chain will have 6 visible ridges, while a 7-speed chain will have 7. If you don’t see any ridges, it’s likely an 8- or 9-speed chain. To be certain, you can look for markings on the chain itself.
An 8-speed chain should be marked with the letters “HG”, while a 9-speed chain should be marked with the letters “IG”. Once you’ve determined which type of chain you have, you can take a look at the derailleur or shifter on your bike.
If the shifter says “6”, “7”, “8”, or “9”, then you’ve identified the number of your chain. Lastly, if you still can’t determine which chain you have, you can always take your bike to a local bike shop and ask for assistance.
There, a knowledgeable staff member should be able to help you identify your chain.
Which is bigger 35 or 40 chain?
It depends on what you are referring to. If you are referring to chain size measurements, then 40 chain is larger than 35 chain. Chain size is determined by the pitch (distance between links) and the width (the thickness of the link).
Chain size is usually expressed by either a number– such as 40– or a pitch and width combination– such as 0.5 x 0.25 inches. In that case, 40 chain would have a larger pitch and width than 35 chain.
On the other hand, if you are referring to the length of a chain, then the answer is not so clear cut. The length of the chain could vary depending on the make and model, as well as the type of chain.
It is impossible to answer the question definitively without knowing these specifics.
What is a #40 chain?
A #40 chain is a roller chain with a pitch of 0.375 inches, which is one of the most commonly used roller chains in the industry. It has an inside width of 0.250 inches, a total plate thickness of 0.
23 inches, and pins and bushings that have a diameter of 0.195 inches. This type of roller chain is designed for a range of applications that require less power transmission than a heavier-duty roller chain.
It can be used for a variety of machines, such as sewing machines, agricultural machinery, printing presses, automotive machinery, machine tools, and industrial gearboxes. It is typically used for light to medium applications, such as sprockets, conveyor belts, and elevators.
#40 chain is made from a variety of materials, including carbon steel and nickel-plated steel. It is available in a variety of lengths and styles, including double-pitch and non-standard designs.
Is 40 and 41 chain the same?
No, 40 and 41 chain are not the same. 40 chain is a type of bicycle chain that is used to drive a single-speed bicycle. It has 40 links and consists of plates, bushings, pins, and rollers, which enables it to be flexible enough for a single-speed drivetrain.
41 chain is also a bike chain, but is much wider than a 40 chain and is typically used for derailleur-equipped multi-speed bicycles. It consists of 41 links and is slightly less flexible than a 40 chain, due to its wider design.
The wider design allows for greater stability when operating in multiple gears. The two sizes have a different amount of pins, and different width per link, which means they are not compatible with each other.
Do all chainsaw chains fit all chainsaws?
No, not all chainsaw chains fit all chainsaws. The size and style of the chainsaw chain must match with the corresponding chainsaw model, since chainsaw chains are specifically made to fit various chainsaw models and sizes.
Chainsaw bar lengths, as well as chainsaw pitches and gauges must match for a chainsaw chain to fit an individual chainsaw properly. Ultimately, chainsaw users should consult with their chainsaw’s manufacturer or manual to find the correct chainsaw replacement chain for their model of chainsaw.
Can I use a Husqvarna chain on a Stihl chainsaw?
In general, no. It’s important to understand that while Husqvarna chains and Stihl chains have similar components and work similarly, the two brands have specific measurements and designs which are not necessarily interchangeable.
The pitch, gauge, and shape of the drive links must all match the components of the saw. Trying to use a Husqvarna chain on a Stihl saw, or vice versa, carries a risk of damaging the saw and operator.
Additionally, while they may both use a 3/8″ pitch, the components and measurements may not be exactly the same. Due to this, it is not recommended to use a Husqvarna chain on a Stihl saw.
Will any chain work on a Stihl chainsaw?
No, not all chains will work on a Stihl chainsaw. Generally speaking, Stihl chainsaws use 34 drive links which makes them incompatible with standard 40 drive link or full skip chains. Additionally, Stihl chainsaws are often equipped with a unique guide bar and sprocket that work most reliably with their own matching saw chain.
It is therefore highly recommended that you use the appropriately sized compatible Stihl chain when using a Stihl chainsaw (which can usually be found at an authorized dealer or service center).