When my phone is charging but won’t turn on, the first thing I do is check if the charging cable is correctly inserted in the phone and to the power source. If the cable is firmly attached, then I try to restart the phone by pressing and holding down the power button for several seconds.
If that doesn’t work, I also try to remove the battery (if possible) and put it back in. If the phone still won’t turn on, I check that the power source it is plugged into is getting power. I will unplug the phone and re-plug it again.
This can reset the phone’s connection if a circuit has become tripped. Additionally, I check that all the ports are working properly by connecting the charger to another device to see if it will charge.
If none of these steps work, it is time to seek professional assistance.
Why is iPhone screen black?
The most common cause is the phone’s battery. If the battery has run out, there will be no power to the display, causing it to remain black. Another issue can be an issue with the display itself, such as a hardware issue or a bug in the software.
A loose or broken display cable or a faulty display module can also be responsible as well as a faulty charger port or Lightning cable. Other possible causes include a software crash or system crash.
If the iPhone is being used in very cold temperatures, this can also cause the screen to go dark or black. In rare cases, the issue can be due to water damage. If the phone has come into contact with any water, liquid or moisture, it has the potential to cause the display to go out.
In any case, it is always recommended to take the device to a professional repair center for diagnosis and repair.
How long should an iPhone take to turn on after dying?
Typically, an iPhone will take anywhere from 30 seconds to 2 minutes to turn on after dying. It will take longer if the battery is completely dead, as the battery needs to retain enough power to boot up the device.
Also, the first boot may take slightly longer than normal due to the device updating any background applications. If the iPhone appears to be taking an unusually long amount of time to turn on, you should check to make sure all the cords are properly connected and the device is charged.
If the problem persists, it may be a sign of a more serious issue and you should contact Apple Support for further assistance.
Why isn’t my iPhone turning on after it died?
If your iPhone has died and won’t power back on, it could be due to a variety of reasons. Below are some possible explanations and steps you can take to try to resolve the issue:
1. Make sure your iPhone is sufficiently charged. If it has been unplugged for a while, try plugging it in and charging it for at least an hour before attempting to power it back on.
2. Make sure the charging cables and ports are in working condition. If your charging cable or charging port is damaged, this can interfere with the charging process and lead to the phone not turning on.
3. Perform a hard reset on your iPhone. This can be done by pressing and holding both the Home and Power buttons for 10 seconds until the Apple logo appears. This can sometimes help resolve minor software issues that can prevent the phone from turning on.
4. If these steps do not work, your last resort might be to take your iPhone to an Apple store or authorized service center. Here, a technician will be able to determine the cause of the issue and help you get your iPhone working again.
How do you know if your iPhone battery is completely dead?
If your iPhone battery is completely dead, there are several ways to tell. First, you will not be able to turn on your iPhone at all. Second, you may notice that the battery depletion indicator, typically represented by a lightning bolt in the top right corner of your display, is missing.
Third, you can check the iPhone’s battery health by going to Settings > Battery and seeing if the Maximum Capacity percentage reads 0%. Finally, you may notice that either the charging port or entire device is completely unresponsive when plugged in or set down on a wireless charger.
If all of these symptoms are present, then it is likely that the iPhone battery is completely dead.
Do iPhone batteries go bad?
Yes, iPhone batteries can go bad. Over time and depending on how you use them, the capacity of the battery can degrade and eventually the battery will no longer hold a charge or be able to power the device.
These include shorter battery life, shorter charging time, and overheating of the device. You can extend the life of your iPhone or iPod battery by avoiding extreme temperatures, not allowing it to fully discharge, and using power saving features in the Settings menu.
How much does it cost to put a new battery in an iPhone?
The cost to put a new battery in an iPhone will vary based on the model of iPhone and which provider you use. Generally, the cost falls between $49 and $69 for most iPhones and includes the cost of labor.
Some providers may also offer a battery replacement program, which typically includes the cost of the battery and may also provide a discount on labor. There are also third-party providers who offer battery replacements for much less, though these come with a risk of voiding the phone’s warranty.
Additionally, Apple offers a battery replacement service through its retail stores, which typically costs between $79 and $99 and also covers labor costs.
Why does iPhone take so long to charge from dead?
The amount of time it takes for an iPhone to charge from dead can vary depending on the type of charger being used and the current battery levels. Generally, iPhones take a long time to charge from dead because of their low-power-draw circuitry.
This circuitry is designed to use minimal energy when charging, which helps conserve power for when it is needed. Additionally, iPhones are designed to charge in a slow and steady manner to prevent damage to the battery long-term.
Temperature and age of the device can also play a factor in charge times. For example, if the iPhone is exposed to extreme temperatures it may take longer to charge or if the device is older, it’s battery may not hold as much charge as when it was new.
Generally, it’s recommended to use the original charger that comes with the device to charge as it is designed to charge at an adequate speed while still drawing minimal power.
How long does it take for an iPhone to charge when dead?
It depends on a few factors, including what type of charger you are using and the battery capacity of the iPhone. With a standard 5W charger, it can take around 3 to 4 hours to charge an iPhone from completely dead to full.
However, if you have access to Apple’s higher power 18W charger or a charging pad that supports 7.5W, then that time can be cut down significantly to around 2 hours. If your iPhone battery is at a very low charge capacity due to age, usage or damage, then it could take even longer than this as the battery needs to be recharged gradually to prevent overheating or other damage.
How do you fix a dead phone that won’t turn on?
If your phone won’t turn on, there are several steps you can take in order to fix the issue. The first step you should take is to make sure that the phone is properly charged. If the phone is plugged into a power source and still isn’t responding, try plugging the phone into a different charger or outlet, as the outlet itself may be the problem.
If the phone is not charging and not turning on still, try a hard reset. This can be done by pressing and holding the volume down and power buttons at the same time until the phone vibrates or restarts.
If your device will not restart, remove the battery and insert it again.
If the phone still won’t turn on after a hard reset, you may need to take the phone to a service provider or store. It could be that you need to have the phone repaired, or it may be a sign that the device itself is no longer functioning properly.
It is always recommended to check with your service provider, recipient or manufacturer to get a replacement phone if needed.
Why did my iPhone just go black and won’t turn back on?
This is a common issue that can be caused by several different things. It’s most likely a software issue, and there are a few ways to fix it.
The first way to fix it is to forcefully restart your iPhone. To do this, press and hold both the power and home buttons at the same time for about 10 seconds, then release them when you see the Apple Logo appear.
This should reset your phone and get it working again.
If that doesn’t work, try resetting your phone using iTunes on a computer. Connect your iPhone to the computer using a lightning cable, then open up iTunes. It should recognize your phone, and you can click on Restore iPhone to reset it.
Before doing this, make sure to back up any data you want to save.
If neither of these methods work, your phone may have developed a hardware issue. You may need to take it to an Apple store or repair shop to have it looked at.