A typical Bath Fitter installation could cost anywhere between $2,500 and $7,000, depending on the complexity and scope of the project. This includes the cost of the prefabricated tub surround, shower base, and other components, as well as the labor and installation of these materials by a professional installer.
The cost also includes the removal of existing fixtures and installation of new components. Labor for installation typically runs between $500 and $2,000, and the cost of the actual materials can vary significantly depending on the type and quality of the components chosen.
If you choose high-end materials like marble, granite, or quartz, then your total cost could be on the higher end of the range. Additionally, certain features like heated tile floors or additional storage may add to the total cost of the project.
How long does Bath Fitter last?
The durability and longevity of Bath Fitter products is determined by the type of product used and how it is maintained. For example, their exclusive acrylic tubs, walls and shower systems are warranted to last a lifetime, while their fixtures and specialty shower doors are warranted to last 18 years.
To ensure the optimal lifetime of the product, Bath Fitter recommends cleaning with mild soap and a soft cloth, avoiding abrasive cleaning products, and rinsing regularly with clean, warm water. Proper maintenance also requires that the product is inspected on a regular basis to ensure there are no signs of leakage, peeling, discoloration, cracks or chips.
In addition, should any of these issues occur, Bath Fitter suggests contacting them as soon as possible for repair or replacment to avoid further damage and diminish their warranty time.
How much does a Bath Fitter tub to shower conversion cost?
The cost of a Bath Fitter tub to shower conversion will vary depending on the existing plumbing configuration and the additional features you choose. Typical tub to shower conversions start at around $2,000 in labor and materials but can range as high as $7,000 or more depending on the type of features you add.
The cost also includes removal of the existing tub and installation of the shower components. Additionally, if you are having a tub liner instead of a full-scale tub to shower conversion, the cost can range from around $1,300 to $3,000 depending on the size and style of the tub.
What is the difference between Rebath and Bath Fitter?
Rebath and Bath Fitter are both popular bathroom remodeling companies. While both companies offer similar products and services, there are some key differences between them.
Rebath specializes in the remodeling of showers, tubs, and tile walls. They also offer accessibility products, including grab bars, shower seats, and easy-entry tubs and showers. This company also offers stone veneer, which can be used to add a contemporary look to any bathroom.
Their products are custom-made to fit the exact specifications of any remodeling plans.
Meanwhile, Bath Fitter focuses primarily on tub and shower installations. They offer a wide selection of acrylic shower and tub walls, which can be enhanced with accent colors, accessories, and even printed valve colors.
This company also provides showers, bathtub liners, and shower bases, as well as a variety of replacements, such as faucets, handles, and doors. Bath Fitter also offers a wide selection of other bathroom accessories and fixtures, such as shower caddies and corner shelves.
Ultimately, the key differences between Rebath and Bath Fitter come down to the products they offer and the services they provide. If you’re looking to perform a complete remodel of your entire bathroom, Rebath is the right choice.
On the other hand, if you’re simply looking to replace your existing shower and tub units, Bath Fitter can provide you with the products and services you need.
Does Bathfitters have a lifetime warranty?
Yes, Bathfitters does offer a lifetime warranty on all of their products. This includes a lifetime warranty on all the products they sell, such as shower and bath liners, bathtubs, wall systems, tub surrounds, showers, and accessories.
The warranty covers all defects in workmanship, materials and installation when properly maintained according to their instructions. This warranty is only valid to the original consumer and not to any subsequent purchaser.
If any part of a product should fail during normal usage, Bathfitters will provide replacement parts, if available, without charge or they will make the necessary repairs. If a product is found to be defective, it can be returned to the original place of purchase with the proof of purchase for refund or repair.
How do you get stains out of a Bath Fitter tub?
The best way to remove stains from a Bath Fitter tub is to use a gentle non-abrasive cleanser and a soft sponge or cleaning cloth. Start the cleaning process by scrubbing the stained areas with the soft sponge or cloth and the cleanser.
If the stain persists, create a paste with water and baking soda and use it to scrub the stained areas. Rinse away the paste with water and examine the area to see if the stain has been removed. If the stain still hasn’t been removed, create a stronger paste with vinegar and baking soda, scrub the stained area with it, and rinse it away with water.
If you are still not able to get the stain out, use a grout or tile cleaner and a soft brush to scrub it. After you have removed the stain, rinse the area with hot water to loosen any debris and apply some treatment for protection.
What kind of caulk does Bath Fitters use?
Bath Fitters uses a 100% urethane caulk for installation, as well as for sealing joints. This type of caulk is highly modifications so it can effectively withstand wetness, water, and steam from baths and showers, and provides a strong seal.
Furthermore, the caulk is one-component and needs no mixing, and its cured form is mildew and mildew resistant, making it an excellent choice for bathrooms. This long-lasting caulk adheres to most surfaces, such as tile, porcelain, acrylic, glass, and stainless steel.
Notably, the caulking is also solvent-free and non-toxic, and requires no heating to install.
Does Bath Fitter cause mold?
No, Bath Fitter does not cause mold. Mold is caused by a variety of environmental factors, such as excessive humidity, moisture, and condensation. While Bath Fitter can improve the overall water sealing of your bathroom, the product itself does not produce mold.
It is important to be sure to check your bathroom regularly for any signs of mold and to take the necessary steps to prevent it. This may include increasing ventilation, addressing water leaks, and repairing any damaged caulking or seals.
Bath Fitter can help you to improve the water sealing in your bathroom, which may help to reduce the likelihood of mold growth, but it is not the cause of the mold itself.
What is the average cost of a Bath Fitter tub?
The average cost of a Bath Fitter tub is approximately $2,000. This cost can vary depending on the type of tub or enclosure you select, as well as the size, finish, any accessories you choose, and installation fees.
For example, a standard one-piece tub with single wall surround may cost around $1,800 on the low end, while a custom two-piece installation with a multi-wall surround may cost around $2,500. If you opt for accessories such as a warm air system or jets, the price may add a few hundred dollars to the total cost.
Installation fees can vary based on your area and can range anywhere from $500 to $1,200. Additionally, you may want to factor in the cost of a new shower curtain and tub protector, which may be an additional cost of $50 to $200.
How often should you get a new bathtub?
The frequency at which you should replace your bathtub depends largely on its material, condition, and usage. Generally speaking, enameled steel and acrylic bathtubs can last anywhere from 10 to 15 years.
Cast iron tubs can last upwards of 40 years! If your existing bathtub is made from one of these materials and is in good condition, you likely won’t need to replace it for many years, even with regular use.
However, bathtubs made of fiberglass or other less common materials may need to be replaced more frequently. Additionally, if your bathtub has chipping, cracking, discoloration, or other visible signs of wear and tear, it may need to be replaced sooner.
Ultimately, it’s a good idea to inspect your bathtub periodically for any signs of damage and replace it if necessary to ensure its longevity and keep your bathroom looking fresh.
How much did you pay for Bath Fitter?
I paid around $5,000 in total for the Bath Fitter project. This included the cost of the new bathtub and shower, and the installation. My Bath Fitter project included the installation of a deep-soak 5’ shower and tub, customized walls and fixtures, as well as a special drain system which meant less water wasted and more efficiency with the new shower.
The installation was quick and easy and I was very pleased with the results. Although it was an expensive project, I am very happy with the improvement to the comfort and convenience of my bathroom, and believe it was worth the price.
How much does it cost to replace a bathtub and surround?
The cost to replace a bathtub and surround will depend on a variety of factors, such as the size of the tub and surround, the type of materials being used, and the costs of any additional labor and installation costs.
Additionally, if your existing design requires demolition and reconstruction, the cost will be higher as more labor will be required.
Generally, smaller tubs can range from $400-$800 for basic white acrylic models. Mid-range tubs start at around $800-$1,200 and go up to $2,000 or more depending on options and features. Luxury tubs range from $2,000 up to $5,000 or more.
Surrounds typically cost the same as a basic acrylic bathtub and can run anywhere from $400-$800, depending on the size and complexity of the surround and installation.
If you’re looking to upgrade to a high-quality material and finishes, such as porcelain or cast iron, you can expect to pay up to several thousand dollars more, up to $6,000 or more.
Moreover, installation costs can range from $100 for a basic installation to $500 for a complex installation requiring additional support, with the average installation costing around $400. Finally, depending on local regulations, removal or disposal of the old tub may be necessary, which can add additional costs.
Altogether, the total cost to replace a bathtub and surround can range from $800 for a basic acrylic tub/surround up to $6,500 or more for a high-quality tub/surround plus additional installation and labor costs.
Who is Bath Fitters competition?
Bath Fitter’s primary competitors are local contractor services and specialty stores, who offer tub and shower installations, remodeling services, accessories, and other bathroom-related items. Some of the larger companies in these sectors include Home Depot, Lowe’s, and Youngevity.
Direct competitors to Bath Fitter include luxury bathroom manufacturers, remodeling contractors, and independent bathroom installation companies. These companies provide a full range of products and services, including tub and shower installations, bath accessories, fixtures, flooring, wall coverings, and more.
Several of these companies are focused on offering personalized services and unique designs for their clients at competitive prices. While many home improvement stores offer lower-priced bathroom items and service, they typically lack the customization that local companies and independent installers can provide.