IP68 is a common rating to evaluate the ruggedness and reliability of a product. IP stands for Ingress Protection, and is often seen in consumer electronics, such as smartphones and portable chargers.
The number 68 is composed of two digits that correspond to specific ratings. The first digit, 6, indicates how well a product is able to protect against various particles, including dust and other solid materials.
The second digit, 8, indicates the product’s water resistance. In this case, IP68 means that the product has been tested and is both dust-tight and capable of surviving extended immersion in water (at a specified pressure).
This type of seal is typically used in environments where a device needs to be able to withstand harsh weather conditions, and even being submerged for 30 minutes at depths up to 3 meters.
Is IP68 OK for swimming?
Yes, IP68 is more than suitable for swimming. IP ratings are internationally recognized standards for devices which measure the level of protection they offer against the intrusion of solid objects (such as dust) and liquids (such as water).
While IP ratings go up to IP-68, that is the highest rating and it provides the highest level of protection against dirt, dust, and even complete submersion in up to two metres of water for up to 30 minutes.
Therefore, if a device meets the rating of IP68, it is more than suitable for swimming.
How long can I swim with IP68?
IP68 is a rating of waterproofing, so it doesn’t directly relate to how long you can swim. However, most products rated with IP68 can withstand immersion in water up to a depth of 1.5 meters (about 5 feet) and up to 30 minutes.
This means that you could theoretically swim with products rated at IP68 (such as some fitness trackers, smartwatches, and smartphones) for 30 minutes at a depth of 1.5 meters. It is important to note, however, that this time varies depending on the product, and it is important to check the manufacturer’s specifications before attempting to swim with an IP68 rated device.
Additionally, salt water, pressure, and extreme temperatures can all affect the performance of waterproof products, so attempting to swim with an IP68 device for longer than the recommended time could damage the device and make it unusable.
Is IP68 fully waterproof?
Yes, IP68 is considered to be fully waterproof in terms of protection from dust and water. Specifically, IP68 is the highest level of protection from the International Electrotechnical Commission (IEC) rating system and it provides protection from water submersion up to 1 meter (3.3 feet) for around 30 minutes.
This means that your device should remain undamaged when fully submerged at that depth and for that amount of time. Additionally, IP68 offers complete protection from dust, meaning that no dust particles should be able to penetrate the device.
What IP is suitable for swimming?
As the ideal pool for someone depends on individual needs, preferences and budget. Generally, inground pools are constructed from various materials: vinyl, fiberglass, gunite and conventional bricks and mortar.
Each of these materials have their own advantages and disadvantages, so it’s important to consider each one when selecting an ideal pool for swimming.
Vinyl-lined pools tend to be the most popular and economical option. Vinyl-lined pools are fairly quick and easy to install, and their maintenance cost is relatively low. In addition, vinyl-lined pools come in a variety of sizes, shapes and styles, making them a great choice for those who want to customize their pool.
They are also highly resistant to UV rays and chlorine. However, vinyl pools have a shorter lifespan than pools constructed from other materials, such as fiberglass or gunite.
Fiberglass pools are more durable and have a longer lifespan than vinyl-lined pools. Fiberglass pools usually require fewer chemicals and cost less to maintain, making them popular among pool owners.
This type of pool is pre-manufactured and designed to fit most ground and lot shapes. The downside of fiberglass pools is that they may not last as long as other materials, and they don’t offer many customization options.
Gunite pools are constructed by shooting a concrete mixture into a steel mesh framework, and they offer numerous customization options. Gunite pools are highly durable and usually require fewer chemicals and lower maintenance costs than other pool types.
The downside of gunite pools is that they are more expensive to install and have a longer curing time, as the concrete shell needs time to dry and settle before being filled with water.
Conventional bricks and mortar pools are built by stacking blocks of mortar and bricks. This type of pool is best for those who want a completely custom-built pool, as the blocks can be laid in any shape and pattern.
Bricks and mortar pools are highly durable and require low maintenance costs, making them ideal for those who want a long-term pool solution. However, these pools take longer to install and are more expensive than other types of pools.
Regardless of the type of pool chosen, proper planning and maintenance are key to ensuring an enjoyable swimming experience. Consider factors such as the shape and size of the pool, the materials used, and the location.
Make sure to budget for maintenance and repairs, as these can add up over time. Follow all safety guidelines and adhere to the manufacturer’s instructions, in order to get the most out of any inground pool investment.
Can I take my IP68 phone in the shower?
No, you should not take your IP68 phone into the shower. While IP68 phones are designed to be water resistant, they are not waterproof or designed to be submerged under water. Taking your phone into the shower may expose it to more water than it is designed to handle.
This could cause water damage to your phone and reduce its lifespan. Additionally, steam and humidity from the shower can cause additional damage to your phone, such as corroding the port connectors and possibly short-circuiting electrical components.
As a result, it is best to avoid taking your IP68 phone into the shower.
Can you shower with an IP68 device?
Yes, you can shower with an IP68 device. IP68 is the Ingress Protection rating given to certain devices based on their dust and water resistance capabilities. This rating guarantees that the device is waterproof, meaning it won’t be damaged even when submerged in up to 6.5 feet of water for up to 30 minutes.
It is perfectly safe to take the device into the shower and submerge it in 3 feet of water for up to 2 hours. However, it is important to remember that IP68 certification only applies to fresh water.
Salt water, hot water, and chemical-based liquids can all damage the device, even if it has an IP68 rating.
What is the highest IP waterproof rating?
The highest IP waterproof rating is IP68. This rating was introduced by the International Electrotechnical Commission (IEC) to indicate the level of protection a certain object has from water and debris.
IP stands for ingress protection and 68 is the highest level of protection. The first number indicates the level of protection from solid objects such as dust and dirt while the second number indicates the level of protection from liquid objects such as water.
An IP68 rating means that the object is completely dust tight and protected against complete and continuous immersion in water. Many mobile phones and other electronic devices have achieved IP68 ratings, making them both dustproof and waterproof.
How can I carry my phone while swimming?
Depending on your needs and the environment, one of the following methods may be best for you.
1. Aquapac Waterproof Phone Cases: These cases have all of their openings professionally sealed, meaning that they will keep your phone completely dry and safe from water damage. They also come with a lanyard so you can attach them to your body and swim with them.
2. Dry Bags: A dry bag is a great option for swimming with a phone. You can put your phone in the bag, seal it tight, and tie it to your body. The bags are made from waterproof material, so your phone won’t get wet.
3. Waterproof Pouches: If you don’t want to use a case or a dry bag, then waterproof pouches are a great option. They are designed to keep your phone dry while also allowing you to access the touchscreen and use the phone while it’s in the pouch.
No matter which of these methods you choose, it is always a good idea to use a waterproof bag or carry your phone in a way that it won’t be exposed to a lot of water. That way, you can make sure that your phone stays safe and dry while you enjoy your swimming experience.
Does IP68 protect against steam?
IP68 does not protect against steam. An IP68 rating on a device is an international certification for dust and waterproofing. The ‘6’ in IP67/IP68 means a device is totally protected against dust, while the ‘8’ means it is protected against water projected at high pressure and/or water immersion up to 1.5 meters for 30 minutes.
Steam, however, was not taken into account when creating the IP rating, as it has a tendency to evaporate, and therefore is not considered a form of water by the certification standards. Therefore, the IP68 rating does not mean a device is protected from steam, so in order to protect your device from steam, you would need a specialized case or other form of steam-proof protection.
Can IP68 be used in salt water?
Yes, IP68 ratings are designed to withstand submersion in water, including salt water. IP68 rated electronic devices and enclosures are able to withstand up to 1.5 meters of submersion in water for up to 30 minutes, so they are well suited for use in salt water.
However, when it comes to salt water, it’s important to be aware that the salt in the water can lead to faster corrosion. So, it is still important to take measures to protect the electronics against corrosion by taking measures such as proper sealing of all parts and connections.
Additionally, careful inspection of the device or enclosure in question should be done after a period of extended salt water exposure to ensure that it is still protecting the electronics properly.
How long can IP67 be submerged?
IP67 rated products are designed to be able to withstand temporary submersion in up to 1 meter (3.3 feet) of water for up to 30 minutes. This rating indicates that the product is dust tight and protected against water intrusion in up to 1 meter of water or up to 3 feet.
In general, IP67 rated products can be immersed in non-continuous immersion for brief periods of time, but the time and depth of immersion are important factors to consider. As a general rule, it is not recommended to submerge products beyond the 30 minute/1 meter depth.
How long does IP68 last in water?
IP68-rated waterproofing generally lasts for an indefinite amount of time in water, provided it is not subject to any damage from abrasion, corrosion, or other external forces. The “IP” stands for Ingress Protection, and a rating of 68 indicates that the device is completely protected from dust particles, and is also able to withstand communications for up to 1 meter of submersion in water for up to 30 minutes.
Some devices with IP68-rated waterproofing are specifically tested to last over successful submersion of multiple to tens of meters of water for upwards of an hour without fail. As long as the device is kept in proper working order, the IP68 rating should last indefinitely.
Which is better IP67 or IP68?
It really depends on the particular application and its requirements. IP67 is designed to keep out dust and allow water to stay out (or to a certain depth) for a specific amount of time. IP68 is designed to be submersible up to a certain depth (can range from 1 to 5 meters depending on the manufacturer).
In most cases, IP68 is generally considered better because it offers more protection from water and dust. For example, if you need a product that will be more reliable in wet conditions (e.g. for swimming or beach use), IP68 would be the better choice.
On the other hand, if you are using the product in a dry environment, such as a warehouse, then IP67 would be a better option. So when making this decision, you have to carefully evaluate the desired application and what is most suitable.
Is IP67 enough for shower?
No, IP67 is not enough for a shower. The “IP” or “Ingress Protection” in the IP67 rating is a rating system for the electrical enclosure of a the device, meaning it refers to its ability to protect against dust and water.
The “67” means the device is rated for protection against the ingress of dust particles and can withstand water being sprayed from any direction for up to 3 minutes. That being said, IP67 does not provide sufficient protection for permanent or long-term water exposure.
It is also not suitable for submerging the device in water. If you are looking for something to use in the shower, you should instead look for an IP68 rated device, as this rating provides protection against long-term water immersion.