The red and blue lights on a Ring device indicate the state of the device. A solid blue light means your Ring device is in its pairing mode and ready to be connected to a Wi-Fi network. When a Ring device is in this state, the Ring app on your mobile phone will detect it and guide you through the setup process.
A solid red light means that either the Ring device is offline or the AC power supply to the device has been disconnected. If your Ring device is offline, then you can attempt to power cycle your device to try and get it back online.
How do I know if my Ring is being recorded?
When your Ring device is connected to the Ring app, you can confirm if the device is recording by viewing the device’s Live View page. On that page, the green record icon will be flashing if it is in the process of recording.
Additionally, you can also view your recent recordings on the page. If there are no recordings visible, then your device is not actively recording.
You can also set up Activity Zones on your device to customize what you want your Ring device to record. Activity Zones are specific areas of the camera’s view that, when triggered, will cause the camera to start recording.
You can configure the Activity Zones for each of your Ring devices by opening the Ring App, click the three lines in the top left corner, click “Devices,” and select the one you’d like to adjust and select the “Zones” tab in the top of the Device panel.
On this page, you can adjust the settings for the Activity Zones and when a zone is triggered, the associated Ring device will start recording.
It’s important to note that videos taken when you manually open the Live View in the Ring app, or videos taken when motion or sound is detected will be stored in the cloud for up to 60 days, and you can review, share, and download the content.
If your Ring device is set up with a Ring Protect Plan then they will be retained for up to 30 days.
Can I turn off the blue light on my Ring stick up camera?
Yes, you can turn off the blue light on your Ring stick up camera. To do so, take the following steps:
1. Log into the Ring app.
2. Tap the Menu in the top left corner of the home screen, and select your Ring device.
3. Scroll down to “Lights and Sounds” and tap it to access the settings.
4. Uncheck the box next to “Enable Blue Light.” This will turn off the light, so it won’t turn on when motion is detected.
By following these steps, you can easily turn off the blue light on your Ring stick up camera.
What does it mean when a Ring camera flashes blue?
When a Ring camera flashes blue, it indicates that the device is in its setup process. During the setup process, a blue light is triggered to let you know that the device is actively attempting to connect to the Ring app.
Once the connection is established, the light should turn off. If the camera continues to flash blue for an extended period of time, it may indicate that there is an issue with the setup process and the connection was not established correctly.
If you encounter this issue, it is recommended to restart the setup process or contact Ring support for assistance.
How do you know if a security camera is recording?
If you have a security camera in your home or office, the only way to be certain that the camera is recording is to check the video recording device associated with it. Check the settings of your video-recording device, like a video recorder, a computer, or a NVR (network video recorder), and ensure that the security camera is connected and recording.
If the camera is being recorded, you should see a designated light on or around the camera. You may also want to check the camera’s manual or user guide for any further details to be sure that it is recording.
However, if the camera’s lights aren’t working, it may still be able to record. If the camera is wireless with no cables connecting it, be sure to check the battery and that the Wi-Fi connection is working.
You should also make sure the recording device is connected to the camera and is set to record. Finally, recording will be of no use if the video being captured can’t be viewed later. Check that the video is being stored in the right format, and that you can access the recordings.
In this way, you’ll know that the security camera is recording and you can save the recordings for future use.
Are Ring cameras always recording?
No, Ring cameras are not always recording. The motion triggered recording feature allows customers to record a short video clip when motion is detected, usually lasting about 10-30 seconds depending on how the recording feature is configured.
You can also manually start and stop recording at anytime. Video clips will be stored in your Ring account for 60 days, and you can download clips anytime you want. If you want your Ring camera to record continuously, you can sign up for Ring Protect, which enables you to store, review, and share all of your Ring videos.
Does ring doorbell light up when someone is watching?
No, it does not. The Ring Doorbell has a motion sensor. If it senses motion, an alert is triggered and sent to the homeowner’s smartphone. However, the Ring Doorbell does not light up when someone is watching or when motion is detected.
It does not have any lighting or any other sort of visible indicator that it is active.
Why is my Ring flood light blue?
The blue light on your Ring Flood Light may indicate that the device is in setup mode or is experiencing a problem. When the Ring Flood Light is first powered on, it will turn blue and then switch to its normal operating mode, which is white.
If the blue light persists, this may mean that the Ring device is having trouble connecting to the internet or is not properly registered with the Ring app.
In order to troubleshoot, try restarting your router and/or modem and then reconnecting your Ring device to the app. Additionally, make sure that the flood light is connected to a power source that delivers at least 10 volts or 1.
5 amps of power. Furthermore, make sure that the flood light is in range of your Wi-Fi network. If the issue persists, you may need to contact Ring customer support.
How do you reset a flood Ring light?
Resetting a flood Ring light is relatively simple and straightforward.
First, make sure your flood Ring light is plugged in and powered on. Then, locate the round reset button on the back of the unit. Press and hold the reset button for 15-20 seconds and then release. The light will then reset and be restored to factory default settings.
If your flood ring light is not working or responding, you can also reset it by unplugging the power cord and then plugging it back in. This should reset the light and restore it to default settings.
It is important to note that resetting your flood Ring light can delete any custom settings that you had stored on it, so it is best to make sure that you have a backup before attempting to reset it.
How long does Ring floodlight stay on?
Ring floodlight stays on for as long as motion is detected. The motion sensor can be adjusted to detect motion up to 30 ft away from the device. The floodlight also has a ‘Dusk-To-Dawn’ mode which will activate when the ambient light is low enough, and stay on until the sunlight triggers the sensor.
It will then turn off automatically, or you can set a timer to limit how long the floodlight stays on. On the Ring app, you can also choose the ‘Always On’ setting, which will keep the floodlight on regardless of motion.