Spectracide Weed Stop Weed Killer is a selective, post-emergent weed control product designed to kill annual and perennial weeds, including grassy weeds and broadleaf weeds, in landscaped areas such as lawns and ornamental gardens.
It contains the active ingredient, Glyphosate, which works by penetrating the weed leaf and traveling down to its root system, killing the entire weed. Spectracide Weed Stop is rain-proof in as little as 6 hours and visible results can be seen as quickly as 3-4 days after application.
It also helps to prevent new weeds from appearing for up to 4 weeks after use. Spectracide Weed Stop kills listed weeds like dandelion, white clover, ground ivy, spurge, chickweed, annual bluegrass, crabgrass, oxalis, black medic, clovers, dollarweed, thistle, henbit, ragweed, and goosegrass.
How do you use Spectracide weed Stop on your lawn?
To use Spectracide weed Stop on your lawn, first water your lawn a day or two prior to application. Begin by spraying the area with Weed Stop and making sure to thoroughly soak the desired areas, including the weeds and the surrounding grass.
For best results, it is important to apply it during the heat of the day and when the weeds are actively growing. Wait twelve hours after application before mowing or entering the treated areas. Spectracide Weed Stop works quickly and is rainfast in one hour.
If one spray is not enough to kill off the weeds, a second application may be required a few days later. Since Spectracide Weed Stop is designed for post-emergent control and does not work on emerging weeds, you may need to spot treat any that have regrown or emerged since your first application.
Furthermore, it is important to note that it may take up to three weeks for full results to be seen.
How soon can I plant grass after using Spectracide weed Stop?
When planting grass after using Spectracide Weed Stop, allow seven to 10 days after application before planting. The necessary waiting period depends on the type of grass you are planting and the specific application instructions for that product.
It is important to read the product label for the manufacturer’s instructions for Spectracide Weed Stop, including the time required for the weed killer to take effect before it is safe to plant grass.
Spectracide Weed Stop kills existing weeds and grasses and prevents new weeds from germinating, so it needs time to fully take effect. This waiting period prevents the weed killer from harming planted grasses or interfering with new grass seed and sod.
Is Spectracide safer than Roundup?
The safety of any herbicide or weed killer will depend on how it is used. Spectracide is a brand of Pesticide/Herbicide and Roundup is a brand of glyphosate-based herbicide. To date, no independent studies have shown that Spectracide is safer than Roundup, because the active ingredients in each product are different.
Spectracide products usually use Bifenthrin, a synthetic pyrethroid, as their active ingredient. Bifenthrin has been found to be safe to use when following the instructions on the label, but it can be toxic to certain birds, fish, and aquatic invertebrates if it is not used responsibly.
Additionally, it should not be sprayed near food or directly onto plants that are intended for human consumption.
Roundup, on the other hand, uses glyphosate as its active ingredient. Glyphosate has been found to have a low level of toxicity in humans and animals. The International Agency for Research on Cancer (IARC) has classified glyphosate as “probably carcinogenic to humans”, but this classification has been repeatedly challenged by scientific organizations around the world.
In conclusion, each herbicide has its own risks and benefits, and it is important to carefully read the product labels to determine which is the best option and to use the herbicide responsibly.
How long does it take for spectracide to kill weeds?
Spectracide generally takes 2 to 4 days to kill weeds, depending on the type of weed, and conditions such as sunlight, temperature, and rainfall. Pre-emergent herbicides are most effective, as they kill seeds before they germinate and emerge as weeds.
Post-emergent herbicides, on the other hand, are most effective when killing existing weeds. Spectracide Weed & Grass Killer, for example, kills weeds on contact, so you can expect to see visible results in a few hours, with complete death of the weeds typically occurring in several days, depending on the size and density of the weed.
It is important to note that it typically takes multiple applications of Spectracide Weed & Grass Killer to achieve effective control, and weed roots may need to be dug out for complete eradication.
Will Triazicide kill grass seed?
No, Triazicide will not kill grass seed. Triazicide is a soil insecticide containing Lambda-cyhalothrin, which is effective at controlling grubs, worms and other soil-dwelling insects. It does not, however, have any effect on grass seed.
If you’re looking for something to help protect your grass seed from pests, consider using a seed treatment containing neonicotinoids such as clothianidin or imidacloprid. These products are specifically designed to protect seedlings and will keep pests like wireworms and cutworms from eating your seeds.
While Triazicide is a great product for controlling unwanted insects in the soil, it won’t do anything to protect grass seed.
Does Spectracide weed Stop need to be watered in?
Yes, it is important to water in Spectracide Weed Stop after it has been applied so that it can penetrate the soil and get to the roots of the weeds for effective results. For best results, it should be watered in lightly within 15 minutes after application and then again about 2 hours later.
If it is raining for more than 30 minutes after application, no additional water is required. Using the water helps the weed killer to reach the weeds faster and deeper underground to prevent them from coming back.
Additionally, watering helps protect plants and grasses around the area from possible damage due to the weed killer.
How often can you apply Spectracide weed Stop?
You can apply Spectracide Weed Stop as often as needed, as long as it is applied according to the labeled directions. Usually, this will mean applying the product every 2-4 weeks to ensure that any weeds that may reemerge are killed before they establish themselves.
It is important to follow the labeled instructions, since Spectracide Weed Stop is a powerful herbicide that can cause damage to plants if applied too heavily or too frequently. Additionally, it’s important to note that Spectracide Weed Stop will not prevent new weeds from growing back, so it is important to regularly check your area for any new weed growth.
How much Spectracide Weed Stop for Lawns per gallon of water?
The amount of Spectracide Weed Stop for Lawns per gallon of water will depend on the size of the area being treated. For general weed control, mix 2 1⁄3flake (0.09 oz) in 1 gallon of water and spray to uniformly wet all weeds.
For severe weeds, higher concentrations may be necessary and mix 4 1⁄3 flake (0.18 oz) per gallon of water to treat 1,000 sq. ft. Make sure to not exceed the recommended amount of fertilizer and read the label for more specific mixture rates.
What’s better Roundup or Spectracide?
The answer as to which is “better” between Roundup and Spectracide may depend on what you’re looking for when it comes to weed killers. Both Roundup and Spectracide are well-known weed killers. Spectracide is a more concentrated product, while Roundup is considered a more “gentle” weed killer.
Roundup is effective against a wide variety of weeds, including those that are more difficult to get rid of. It is considered a glyphosate-based weed killer, meaning it mainly works by killing the weed itself by blocking off its essential enzymes.
Consequently, Roundup is hailed for its safety as it does not move around as much in the environment. Moreover, it dissipates quickly and is relatively neutral in terms of disrupting existing soil microorganisms.
Roundup is also preferred for its convenience, being a ready-to-use product, and being less expensive compared to Spectracide.
On the other hand, Spectracide is a slightly more intense weed killer that includes the active ingredients diquat and glyphosate. It is often the go-to choice when dealing with especially stubborn weeds or for larger areas that need clearing out.
It is also noted for its increased effectiveness at killing existing weeds and does have the bonus of killing perennial weeds. However, Spectracide is deemed more expensive, potentially more toxic, and more likely to move around in the environment.
Ultimately, the better choice between Roundup and Spectracide comes down to the type of weed infestation, your comfort level with applying chemicals, and of course, your budget.
How long does Spectracide last?
Spectracide products can last for a variety of time frames depending on which product you use. For instance, Spectracide’s Weed & Grass Killer and Insect Killer will typically last up to 2 weeks when applied to an area.
Destroy Outdoor Insect Killer Granules are effective for up to 4 months, and Spectracide Ant Shield Outdoor Insect Control lasts up to 8 months. For their bug sprays and bug zappers, the product label typically notes how long the product is effective after being applied.
It is important to always read the product label before using and take the appropriate safety precautions.
How do I apply Spectracide?
When applying Spectracide, it is important to read the product label first and follow the directions. Generally, Spectracide can be applied in two ways, by mixing concentrate with water into a sprayer, or by using a pre-mixed ready-to-use formula.
For mixing concentrate, pour the suggested amount of product into a garden sprayer and fill the sprayer with water, stirring to mix the two together. Shake the sprayer well before using and between refills.
Spray the areas where insects and pest are present, making sure to get all surfaces, including the underside of leaves.
When applying ready-to-use formula, attach a hose-end sprayer to the hose and turn on the water, making sure to close the on/off valve. Shake the product well and then unscrew the sprayer jar cap, pour the formula into the sprayer bottle, and replace the sprayer jar cap.
Turn the on/off valve to on, and spray the areas of insect activity. Be sure to get all surfaces, including the undersides of leaves.
After applying, do not apply water unless directed, as it can reduce the product’s effectiveness. If a greater level of protection is desired, repeat the process as directed on the product label.
How do I get my Spectracide sprayer to work?
To get your Spectracide sprayer to work, you will need to make sure it is properly assembled, filled and maintained. Assembly is straightforward and instructions are included with the sprayer. You will want to unscrew the sprayer cap and fill the tank with the appropriate liquid.
Make sure to wear protective gear when mixing or filling the tank and follow the instructions on the product label. After assembly and filling, the sprayer needs to be maintained properly. Inspect the sprayer each time before use to make sure it is free from any clogs, leaks, or defects.
The sprayer wand should be cleaned with a damp cloth after each use and any clogged nozzles should be cleared to ensure proper spraying. If any parts are worn or broken, they should be replaced. If you are having any further issues or questions regarding your Spectracide sprayer contact the customer service team.