Q-See was a company that specialized in surveillance systems, specifically digital video recording systems, that had been in operation since 2003. Over the years, the company grew to become a major player in the home and business surveillance market, with a wide range of products including digital video recorders, cameras, and other accessories.
However, in 2017, it was announced that Q-See had been acquired by another firm, Digital Watchdog. The acquisition marked the end of Q-See’s operations, as Digital Watchdog chose to use their own brands and products to move forward.
Nevertheless, many of the products that were developed by Q-See can still be found on the market today, but are now branded under Digital Watchdog.
How do I reset my Q-See camera?
Resetting your Q-See camera is fairly easy, and it can be accomplished in three simple steps:
1. Locate the Reset/Setup Button on your camera. Typically this button is located on the bottom or back housing of the camera.
2. If your camera has an initial setup option, press the Reset/Setup Button to enter this mode. If not, proceed to the next step.
3. Press and hold the Reset/Setup Button for 10-15 seconds. After doing so, the camera should reset to its factory settings.
Once you have completed these steps, your Q-See camera will have been reset and be ready for use.
How do I access Q-See remotely?
Accessing your Q-See security system remotely is a great way to keep your home or business secure while you’re away. To do this, you’ll need an account with an internet service provider, a compatible Q-See system, a router and an internet connection.
Once you have these, follow these steps to set up remote access:
1. Set up your Q-See system on your local network. Make sure to take note of the IP address assigned to your DVR/NVR.
2. Log into your router and forward ports for your Q-See system. Be sure to refer to the user manual for your router to properly configure it.
3. Create an account with DDNS. This service will enable you to access your system remotely from any internet-connected device.
4. Configure your Q-See system for remote viewing. This involves logging into your DVR/NVR and setting up network settings.
5. Test your remote setup by logging into your camera viewer interface and viewing your cameras remotely.
Once you have successfully set up your Q-See system for remote viewing, you will be able to access it from any internet-connected device. You can also set up motion alerts so you’re notified whenever motion is detected on any of your cameras.
Happy monitoring!
What NVR is compatible with Q-See cameras?
NVR (Network Video Recorder) systems are compatible with Q-See cameras, but only when the NVR device is specifically compatible with the Q-See cameras. When shopping for a compatible NVR system, you should first determine which Q-See cameras you plan to use, then look for an NVR with compatibility.
Many NVRs from brands like Hikvision and Dahua are compatible with Q-See cameras, including those from the Q-See Pro, QT-, QTH- and QS-series. It’s important to check the specifications for each NVR to make sure it will work with your Q-See cameras.
Additionally, you should also ensure that the compatible NVR has the storage and video resolution your application requires.
How do I contact q see support?
If you need assistance from Q-See support, there are a few different ways you can contact them.
The most direct way to get in touch with their customer service is by calling their toll-free support line at 1-855-99Q-SEE (1-855-997-7333). This line is available 24 hours a day, 7 days a week.
You can also reach the Q-See customer service team by emailing [email protected]. They promise to respond within a few hours or the next business day.
Additionally, if you head over to their official website you will find several different resources that you may find helpful. These include frequently asked questions, product tutorials, troubleshooting tips, software and firmware downloads, and more.
Finally, Q-See also has several social media profiles through which customers can contact them. They have pages on Facebook, Twitter, and YouTube. Just send them a message through whichever one you prefer and they will be happy to help.
How do I pay my QC health certificate?
In order to pay your QC health certificate, you will need to choose one of the payment options offered by the Quebec Ministry of Health. You can pay by credit card, Interac, Money order or bank draft.
If you choose to pay your QC health certificate by credit card, you will need to provide the cardholder’s name, address, telephone number, and credit card number. If you choose to pay by Interac, you will need to provide your routing number and account number.
If you choose to pay by Money order or bank draft, you will need to make the payment out to ‘Revenu Québec’. Additionally, you will need to write your social insurance number on the money order or bank draft.
Once you have selected a payment option and provided the required information, you can submit your payment to the Quebec Ministry of Health.
How can I download QC ID?
To download your QC ID, you need to do the following:
1. Visit the Quality Correlation (QC) website and register for an account. Once you have registered, log in to your account.
2. Once logged in, click on the “My Profile” tab.
3. Under the “Profile Information” section, click the “Download QC ID” button. Your QC ID will now be downloaded and saved to your computer.
4. You can view this information anytime from the “My Profile” page, or you can use it to log in to the QC website.
By downloading your QC ID, you can track your progress in using the system. You can use this to connect your profile with third-party software, such as a project management application. This is useful for tracking multiple projects or teams, as it helps you stay informed about changes and updates across the board.
It is important to keep your QC ID safe and secure, since it is essentially your unique identifier in the system. As such, it should not be shared with others, and you should ensure it remains private.
Does Q-See app still work?
Yes, the Q-See app still works. It is an app designed to allow users to remotely view surveillance footage from their Q-See DVR system. Available for iOS and Android devices, the app enables users to monitor their home or business security cameras from virtually any location.
It also features systems compatible with NVRs, and features tools such as alarm notifications, two-way audio, multi-camera viewing and event playback. In addition, it can also be used to monitor and record live video footage, making it a very useful security tool.
Is Q-See going out of business?
At this time, there is no indication that Q-See is going out of business. The company has been in business for more than 15 years, providing consumers with a wide variety of security products, including surveillance cameras, video recorders, and access control solutions.
They continue to provide quality products and support for their customers. Q-See’s website also shows that their products are still for sale on their online store, as well as through authorized online and offline retailers.
Additionally, their customer service team is actively responding to support requests and inquiries. Based on these factors, it is safe to assume that Q-See is not going out of business.
How do I unlock my Q-See account?
You can unlock your Q-See account by using the password reset link found on the login page. Once you click on the password reset link, enter the email address that you used to create your Q-See account.
You’ll then receive an email with a link to reset your password. Once you click on that link, you’ll be taken to a screen where you can enter a new password. Once you enter your new password, your account will be unlocked.
Do Q-See cameras have audio?
Yes, certain Q-See cameras have audio capabilities. This feature is often referred to as “two-way audio” because not only can you hear what is going on in the vicinity of the camera, but you can also make a call via the microphone on the camera and talk to anyone in the vicinity of the camera.
Certain Q-See camera systems come with microphones built directly into the cameras to allow for the two-way audio capability. Additionally, you may be able to add additional microphones or audio accessories to some systems to increase range and sound quality.
Depending on your needs, you may want to choose a system with built-in audio or one that allows you to upgrade your system with audio accessories.
How do I factory reset my Vivotek NVR?
The steps for factory resetting a Vivotek NVR depend on the specific model you have. However, the general steps can be as follows:
1. Power off the NVR.
2. Locate the “Reset” button on the NVR. For many models, this will be on the back of the unit, near the power input.
3. Using a straightened paperclip or other slim, pointed object, press and hold the reset button for 10-15 seconds. The NVR should indicate that it is being reset.
4. Once the reset is complete, power the NVR back on by connecting the power cable.
5. During the startup process, a prompt should appear asking if you want to perform a factory reset. Select “Yes” and follow the on-screen instructions to complete the reset process.
Once complete, your Vivotek NVR should be reset to all factory default settings.
What is ONVIF password?
The ONVIF password is a security password used to access devices on a network using the Open Network Video Interface Forum (ONVIF) protocol. This password is different than a login password and typically used to pair the device to the network.
The ONVIF password is assigned when the device is first installed on the network and can usually be located on the device itself or its accompanying manual. The password can be changed depending on the security needs of the system, allowing the user to maintain a high level of security over the system.
It is important to be aware that the ONVIF password needs to be securely stored and kept up to date. If the password is lost or forgotten, it can be difficult to recover due to its encrypted nature.
Where is Vivotek camera on network?
To locate a Vivotek camera on your network, you will need to use either the Vivotek Surveillance System software, or a Network Scanner tool such as Angry IP.
To locate the camera with the Vivotek Surveillance System software, open the software and enter your network settings. Then, select “Discover Devices”, and the Vivotek camera should show up under the list of discovered devices.
Once the Vivotek camera is located, you can enter the IP address to access the camera from the internet.
To use an Angry IP Scanner, select a scan range matching your network settings. Then, click “Start”, and wait for the scan to complete. In the results list, look for an IP address belonging to the Vivotek camera.
Once you have identified the Vivotek camera in the results list, you can enter the IP address to access the camera from the internet.