A green spa is a type of spa that specifically focuses on eco-friendly practices and products. This means that all of their services, products, and treatments are sustainable, natural, and holistically-minded.
Generally, green spas use organic and natural ingredients and strive to minimize the use of chemicals and excess packaging. Green spas look to treat the entire person, combining elements of wellness, physical health, and spiritual wellbeing.
These spas also strive to protect the environment by using sustainable energy sources, implementing recycling and waste reduction policies, using earth-friendly ingredients and packaging, and minimizing water usage.
Additionally, many green spas go even further by integrating eco-friendly building materials, implementing green cleaning practices, and even using renewable energy sources.
Who owns Massage Green?
Massage Green is owned by MGM Services which is a privately-owned massage therapy franchise founded in 2007 by Jason Ehrlich, Bill Bensinger, and Chris Haymes. Along with their headquarters in Southfield, Michigan, they have over 65 locations across the United States.
Their goal is to provide exceptional massage services at a reasonable cost without long-term contracts or comprehensive packages. Massage Green provides therapeutic massage, facials, spa packages, organic services, and membership benefits.
They are focused on providing their clients with quality services and personal attention.
Is it safe to go in green hot tub water?
No, it is not safe to go in green hot tub water. Most hot tubs contain chlorine or bromine to help keep the water clean and clear of bacteria. When these chemicals are not used according to manufacturer’s directions, it can cause the water to turn green.
Additionally, these hot tubs are not usually monitored for bacteria variation and the green water can therefore contain dangerous organisms that can cause rashes, infections, or other more serious health issues.
To ensure safety, it is best to always check your hot tub’s chemical levels and check for any unusual colors or discolorations. Make sure to contact your hot tub service provider immediately if you see any potential signs of danger.
How often should I drain my hot tub?
Ideally, you should drain your hot tub at least every 3-4 months. This will help keep the water clean and free of any buildup of unwanted debris or chemicals. As a part of regular maintenance, you should also test the chemical balance of the water on a weekly basis and adjust as needed to ensure the pH and other levels are where they should be.
Draining and refilling the hot tub periodically will help to ensure the water remains clean and that the chemical balance remains stable. Additionally, depending on how often the hot tub is being used, it might be necessary to drain it more often.
If the water is looking murky or if the chemical balance is becoming difficult to maintain, it’s a good sign that it’s time to drain the hot tub.
What is spa shock treatment?
Spa shock treatment, also known as pool shock treatment or chlorine shock, is a process used to reduce the amount of contaminants present in the water of swimming pools and hot tubs. It involves introducing a special type of chlorine, referred to as ‘shock’, into the water to raise the chlorine levels and kill off any bacteria, algae, and other microorganisms that may be present.
Prior to adding the chlorine, the pool water must be tested to determine the levels of pH and free chlorine already present. Then, the exact quantity of shock can be added, allowing for it to completely dissolve in the water and raise chlorine levels up to 10ppm for swimming pools, and up to 5ppm for hot tubs.
The shock treatment should be performed at least once a week, or as needed. It is best to shock the pool after a heavy rain, or after a lot of useage that causes a build-up of contaminants, such as dirt and sweat, in the water.
After shocking, the pH, total alkalinity, and free chlorine levels must be tested. Finally, chlorine stabilizer must be added to prevent UV radiation from destroying the chlorine, allowing it to remain in the pool water for longer.
How do I keep my hot tub water crystal clear?
Keeping the water in a hot tub crystal clear is a multi-step process. Regular maintenance is the key element to having a clean and clear hot tub. First, it is important to keep the pH level in the water balanced, optimal level is between 7.2 and 7.
8. This can be done with regular testing and adding pH balancing chemicals to the tub as needed. Secondly, it is important to keep all surfaces of the tub clean, including the sides, the filters and any other nooks and crannies in the tub.
Using a brush or a wet cloth and non-abrasive cleaners can help ensure that dirt and debris do not build up in the tub. Additionally, it is also important to regularly clean the filters as these can become clogged and lead to cloudy water in the tub.
Finally, regular shock treatments and chlorine treatments can help to break down any oils or other substances that can cause the water to become cloudy and discolored. Following these steps can help to keep the water in the hot tub crystal clear and crystal clean.
How do I clean my green spa water?
In order to clean your green spa water, you’ll need to do the following:
1. Test the chemistry of your spa water: Test the pH, alkalinity, calcium hardness, and sanitizing levels in your spa water to ensure they are within the proper range. You should perform this test at least once a week.
2. Shock your spa water: Shock your spa water with chlorine or bromine to destroy organic matter and bacteria that is causing the cloudy water.
3. Balance the levels: Adjust the pH, alkalinity and calcium hardness to bring them back into balance.
4. Clean the filter: Clean the filter in your spa, removing any debris, algae or other organic material that can be a source of contamination.
5. Add chlorine or bromine: You should add a dosage of chlorine or bromine following the manufacturer’s instructions.
6. Test the water: Check the levels of your spa water to ensure it is safe for use.
By following these steps, you can restore clarity to your spa water and ensure it is safe for use.
Why is my hot tub water sticky?
Your hot tub water may be sticky due to excess calcium and total dissolved solids (TDS), which can cause scaling on pool and hot tub surfaces. High calcium levels can also cause cloudy or discolored water, as well as surfaces that feel sticky when touched.
In some cases, an accumulation of bacteria, body oils, and minerals deposit can also cause the water to become sticky. To resolve the issue, you can try adding a hot tub clarifier to the water, as well as using a filter to remove minerals, body oils, and debris.
Additionally, shock the water with a non-chlorine shock treatment, or use an enzymatic cleaner to breakdown oils and bacteria. Lastly, make sure to maintain proper chemical balance in the hot tub and clean spa filters regularly.
Does too much chlorine make hot tub green?
Yes, too much chlorine can make a hot tub look green. Chlorine is an important chemical that helps to keep the hot tub clean, disinfected, and safe. However, when chlorine is misused, it can cause algae and bacteria to grow in the hot tub, which can cause the water to turn green.
To ensure that your hot tub stays clean and healthy, it is important to make sure your chlorine levels are kept in the right range. Generally, a chlorine level between 2.0 and 4.0 ppm (parts per million) is recommended.
You can also shock your hot tub regularly with a chlorine shock to help keep it clean. If your hot tub is turning green, test its chlorine levels and look for an algae bloom. If levels are too high, you will need to adjust them with the help of a hot tub technician.
Does high pH cause green water?
No, high pH levels do not cause green water. Green water is usually caused by an algae bloom, which is caused by a combination of nutrient and light imbalances in the water. High pH levels can increase the rate of algae growth, however, so managing the pH level is important in keeping your body of water free of algae blooms.
Depending on the type of fish you keep, you may need to maintain slightly acidic or alkaline conditions which can be done through water testing and chemical additives. Additionally, proper water filtration and circulation to reduce excess nutrients and remove organic matter can help keep algae from taking hold in your tank.
Can low alkalinity cause green water?
Yes, low alkalinity can cause green water, also known as an algae bloom. Algae growth is stimulated when the alkalinity of a body of water is low and nutrients like phosphorus, nitrogen, and carbon dioxide are readily available.
This combination of low alkalinity and high nutrient levels create the ideal conditions for an algae bloom. Algae of any type, including the common types that cause green water, need enough alkalinity in the water to carry out photosynthesis and absorb nutrients from their environment.
When the alkalinity is too low, photosynthesis is inhibited and the algae may not be able to absorb nutrients from its environment. Over time, the algae die because of the oxygen depletion and the growth of other microorganisms that feed off the dead algae.
This leads to cloudy or green salt water conditions, depending on the type of algae present.
What is an eco hot tub?
An eco hot tub is a type of hot tub designed to be energy-efficient and eco-friendly, with features such as efficient heaters and insulated covers that minimize energy loss. Eco hot tubs are also quieter than traditional hot tubs, which makes them more suitable for use in urban environments.
They also typically feature components that reduce energy usage and help to promote a healthy environment. Many feature high-efficiency air pumps and circulation systems and high-efficiency ozone purification.
Eco hot tubs are also designed to minimize their impact on the environment by reducing their water usage, including low water flow settings, water-saving nozzles, and filters that minimize water wastage.
In addition, many eco hot tubs also feature natural materials, such as bamboo, that are more environmentally friendly than traditional materials such as synthetic plastic. All of these features help to not only reduce the environmental impact of using a hot tub, but also help to make it an enjoyable experience.
How green is a hot tub?
A hot tub’s “green” factor can depend on a variety of factors, such as the materials used in its construction, its energy efficiency, and the types of chemicals used to clean the water. Generally speaking, most hot tubs are not very green because of the large amount of energy needed to heat the water.
This energy is usually generated from non-renewable sources like natural gas or electricity which can have negative environmental impacts. Additionally, some of the chemicals used to clean the hot tub water can also cause environmental problems.
In order to make a hot tub more environmentally friendly, some newer models are designed to be more energy efficient, using heaters that use less energy. These models often have insulation to keep the heat in, as well as thicker acrylic covers.
Additionally, the use of alternative water-cleaning systems such as ozone or mineral purification instead of chlorine can reduce the amount of harmful chemicals entering the environment. Finally, some hot tub manufacturers also use recycled materials to construct their hot tubs.
All of these measures can make hot tubs more green and more energy-efficient.
Can I go in a green hot tub?
Yes, you can use a green hot tub, though it is important to keep it properly maintained and clean. Green hot tubs are made from sustainable, natural materials that are free from toxic chemicals and byproducts, such as chlorine or bromine.
As a result of this, they tend to require little maintenance and can provide a more natural, eco-friendly experience.
Before using a green hot tub, you should check to make sure it is clean and safe by testing the pH level and chlorine/bromine level, which should be between 7.4 and 8.4 and between 0 and 3 ppm, respectively.
You should also read and follow the manufacturer’s instructions on hot tub maintenance and cleaning. It is also important to drain and clean out a green hot tub every month in order to reduce the amount of buildup and bacteria that can occur over time.
Overall, green hot tubs are a great option for those looking for a more natural and eco-friendly experience. If properly maintained, a green hot tub can provide a relaxing and enjoyable experience.
Which hot tub is the most energy efficient?
The most energy efficient hot tub is an Hot Spring Vanguard Series high-efficiency hot tub. This hot tub is designed for energy-efficiency, with two-pump systems and highly insulated construction that keeps the heat in and your energy bills down.
The two-pump system allows for a more efficient circulation system, reducing electrical consumption. The insulation includes full foam insulation and a barrier that blocks out air infiltration, keeping the hot tub at an optimal temperature with minimal heating.
It’s also equipped with an energy-efficient ECO setting, which reduces pump speeds to save energy. This hot tub also features advanced controls and jets that allow you to customize your hot tub experience.
With its energy-efficient features, the Hot Spring Vanguard Series is a great option for anyone looking to save on energy costs while enjoying an amazing hot tub experience.
How do you treat hot tub water without chemicals?
Hot tub water can be treated without chemicals by using advanced oxidation technologies like ozone and UV light systems. Ozone, when dissolved in the water, creates a powerful oxidizing agent that disinfects the water by destroying bacteria, viruses and all kinds of other microorganisms.
UV light systems also work to kill most of the bacteria, viruses and other microorganisms that can linger in hot tub water. When used in combination with a filter system, this combination of advanced oxidation technologies is highly effective in keeping hot tub water clean and safe to use without the use of harsh chemicals.
It is also important to maintain proper water balance in hot tubs, including pH levels, alkalinity and calcium hardness levels, to keep the water clean and free from unpleasant odors. Regular water changes are also important in helping to prevent any build-up of contaminants and microorganisms.
Can wood fired hot tubs get too hot?
Yes, wood fired hot tubs can get too hot. If not properly monitored and maintained, the water temperature in your hot tub can reach dangerous levels, which can cause serious health risks like burns or even fainting.
To prevent this from happening, it’s important to regularly check and adjust the temperature in your hot tub. If the water gets too hot, it’s important to turn down the heat and/or add some cold water to lower the temperature.
Additionally, it is recommended that people only stay in the hot tub for 15-20 minutes at a time, with breaks in between, to ensure the highest level of safety.
Do hot tubs harm the environment?
Yes, hot tubs can harm the environment in a variety of ways. Hot tubs use large amounts of energy to heat the water, which can have a negative impact on the environment. The chemicals used to sanitize and maintain the water can cause erosion and can also leak into the environment.
Furthermore, when the water is eventually drained, the chemicals can seep into the soil, causing further issues. The water used must then be replenished, which can take a toll on local water resources.
Additionally, hot tubs can attract insects and other pests, potentially leading to the spread of disease. As such, it is important to carefully consider the environmental impact of installing and using hot tubs.
How do spas save water?
Spas often use water conservation techniques to reduce their water consumption. These techniques can include using low-flow fixtures, using efficient hot tub covers and circulating pumps, installing rainwater harvesting systems, and using automatic shut off systems for showers and spas.
Low-flow fixtures use less water but more pressure, so they can provide an effective shower without using more water. Hot tub covers and circulating pumps can reduce heat loss, limiting the need for additional water for temperature control.
Installing rainwater harvesting systems allows spas to capture, store, and use the rainwater collected. Automatic shut off systems, meanwhile, ensure that all showers and spas shut off after a certain period of time.
This helps to prevent water waste due to negligence. In addition, some spas also use water-saving strategies such as consuming food that requires less water to produce, such as plant-based dishes, and avoiding foods that require more water, such as beef.