A pole chainsaw is a type of chainsaw device that uses a pole to extend the reach of the user. It typically features a small gas-powered motor and a chopping blade at the end of its long pole. This type of chainsaw is especially useful for pruning overgrown trees, cutting through thick branches that are too high to reach with a regular chainsaw, and trimming thick brush and hedges in hard-to-reach areas.
It is also useful for cutting down small trees and is ideal for outdoor tasks in hard-to-reach areas. Pole chainsaws are especially convenient for homeowners as they enable users to trim higher branches with greater ease and safety.
Can you use a pole saw as a chainsaw?
No, a pole saw cannot be used as a chainsaw. Although pole saws and chainsaws can both be used for cutting and trimming branches and limbs of trees, they are two distinct tools. A pole saw is made up of a long pole with a saw blade on the end that can typically be extended for greater reach.
The blade typically ranges from 6 to 12 inches, designed for cutting branches up to 8 inches thick. In comparison, a chainsaw is a mechanical saw containing a guide bar and a rotating chain driven by an electric or gasoline engine.
Its maximum cutting depth can range from 8 to 18 inches depending on the model and size. Therefore, a pole saw cannot be used as a chainsaw due to the difference in size and strength of the blades.
How do you cut branches with a pole chainsaw?
To cut branches with a pole chainsaw, first make sure that you have the right equipment for the job. Make sure that your pole saw is well-maintained and in good working order, with a sharp blade and the appropriate fuel.
Additionally, wear protective goggles and gloves if you are working with branches above shoulder height.
When you are ready to begin cutting, identify the branch that you are going to cut, and measure it in order to determine the length of cut. Then, apply the saw’s blade against the top and bottom of the branch, close to the trunk, at a 45 degree angle.
Push the saw forward until you start to feel resistance and pull it back using a sawing motion. This will Take several passes, depending on the thickness of the branch. When the branch is cut, it should easily separate from the trunk.
Once the branch is cut, be sure to inspect the area and look for potential hazards that may arise due to the cutting. If the branch is left hanging, it may eventually fall and injure someone, so be sure to remove it carefully.
Finally, safely dispose of the branch by either chipping it or hauling it away in a trash container. If you are leaving it with the tree, be sure to cut it into properly-sized pieces so that it does not present a hazard.
How big of a branch can a pole saw cut?
The size of a branch that a pole saw can cut depends on the design, power and sharpness of the saw’s blade. Generally, a pole saw can cut branches up to 8 to 10 inches in diameter, but this limit can vary.
If the pole saw is a corded electric model, which typically offer more cutting power than a battery-powered saw, you can increase the maximum diameter of the branch that can be cut. Regardless of type, using a sharper blade will help provide a cleaner cut and reduce the effort required to cut thicker branches.
How do you attach a chainsaw pole?
Attaching a chainsaw pole is a relatively simple process. First, make sure the chainsaw is powered off. If you have an older saw, you may need to unscrew the drive sprocket cover and then the clutch cover before inserting the pole onto the drive shaft.
Make sure to use a flat screwdriver or similar tool to plug in the oiler lines to the bar and sprocket, and plug in the spark plug wires or cable. With the pole securely in place, retighten the clutch and sprocket covers.
Make sure the assembly is tight and secure before powering on the chainsaw. When finished with the pole, remember to take it off and affix it securely to the chainsaw again with the screwdriver or other tool before powering off.
How do you use a tree pole saw?
Using a tree pole saw is an effective way of removing branches and small logs from a tree. Depending on the type of saw you have, the process will differ slightly.
For manual pole saws, you’ll need to place the blade of the saw at the base of the branch or log. Then pull the handle downward to activate the cutting blade as you hold the saw steady. Cut through the wood in a back-and-forth sawing motion, making sure the blade is always in contact with the wood.
Keep your hands and body away from the blade to avoid injury. Once the branch or log is detached, you can safely bring the saw back down and remove the limb from your working area.
Gas powered pole saws are also available and operate slightly differently. With these, you’ll want to begin by starting the engine and checking the cutting blade to make sure it’s secure. Then, as with a manual saw, place the blade of the saw at the base of the branch or log and activate the engine.
Once engaged, the blade of the saw should start moving and cut through the wood in a back-and-forth motion. Again, keep your hands and body away from the blade and detach the branch or log once the cut is complete.
Releasing the power switch on the saw will turn off the engine. From there, you can safely bring the saw down and remove the limb from your working area.
What should I look for in a pole saw?
When shopping for a pole saw, there are several features to consider that will help you select the right model for your needs.
The first is the saw’s cutting power – measured in amperage (amps) – and bar length. Generally, the more amps, the more powerful the saw, however, it may be difficult to handle a model with a longer bar length and more amps.
Another important factor to consider when choosing a pole saw is its versatility. Some models come with multiple interchangeable blades, while others allow you to adjust the pole length to reach higher limbs without the use of a ladder.
Weight should also be a consideration when shopping for a pole saw. A lightweight model might be easy to maneuver but can also be difficult to control in high winds or on slopes.
Finally, don’t forget about safety. Look for a saw with an integrated anti-kickback system and wider guards to keep your hands and limbs safe from sawing debris. Be sure to select a saw with a large guard to protect from flying sawdust, and check the handle for a comfortable grip.
Overall, keep in mind the size of limbs you’ll be cutting and what type of sawing power and accuracy you need in order to choose a pole saw that will meet your needs.
How long is the pole on a pole saw?
The length of the pole on a pole saw can vary greatly depending on the make or model of the saw. Some lower-end pole saws can have poles ranging from 10 feet long up to 15 feet long, while more expensive models can range from 16 feet long to as long as 24 feet.
In addition, there are some specialty pole saws that can feature even longer poles, sometimes reaching lengths of 40 or even 60 feet. Ultimately, it is important to read the specifications of the pole saw that you are interested in purchasing in order to determine the exact length of the pole.
Do Stihl pole saws extend?
Yes, Stihl pole saws extend, allowing for a variety of heights to effectively chop branches or limbs. The Stihl PP 900 Telescoping Pole Pruner features a heavy-duty telescoping shaft, which allows for a variable reach of up to 15 feet.
It is designed for pruning, trimming and cutting small to medium-sized branches up to 8 inches thick. Another model, the Stihl HL 100 K Extended Reach Hedge Trimmer, extends from 6 to 12 feet and features a 15 inch blade ideal for trimming hedges and large bushes.
Both models are lightweight, ergonomically-designed and are powered by the Stihl 4-mix low-emission engine.
How much does a Stihl HT131 cost?
The cost of a Stihl HT131 depends on the type of accessories you purchase with it. Generally, the HT131 pole pruner package comes with a pruner, a saw blade, and 20-cm extension which can cost anywhere between $300 and $400.
However, if you buy the HT131 package that also includes additional features such as a longer extension shaft, Oregon cutting bar and chain, Stihl Ultra oil, and a carrying case, the price can be closer to $500.
All prices are subject to change depending on the supplier and any sales or promotions going on.
What size chain does a Stihl pole saw use?
The size of chain used on Stihl pole saws depends on the model. Generally, Stihl pole saws use 3/8” Picco Mini 3 (PM3) chains. These chains have small 3/8″ pitch cutters and small radius semi-chisel style links.
They are designed for multiple uses, including both low kickback saws and small pruning saws. The small pitch increases the chain saw’s ability to make fine cuts, while the small size also helps to reduce kickback.
Additionally, these chains are designed with high-speed cutting actions for faster results and efficient cutting performance.
Who makes the lightest gas powered chainsaw?
The Husqvarna 572 XP (59.2cc) Gas Powered Chainsaw is widely known as the lightest gas powered chainsaw. It weighs just 11.8 pounds and is a great balance between power and weight. It also has an excellent ergonomic design that helps minimize fatigue, even when working for long periods of time.
This model also has an X-Torq engine that helps reduce fuel consumption and emissions. The 572 XP is suitable for light duty and professional tasks, such as limb maintance and tree felling. With top of the line features and durability, the Husqvarna 572 XP is considered by many to be the best gas powered chainsaw for light duty tasks.
What chainsaw has the power to weight?
The Husqvarna 450 Rancher is one of the most powerful chainsaws on the market when it comes to power to weight. This chainsaw has an impressive 18-inch bar and a powerful 55cc two stroke engine. This combination makes it one of the lightest and most powerful chainsaws available.
The Husqvarna 450 Rancher also has an automatic chain oiler, combined choke/stop control, and an air filter that can be easily accessed so that maintenance will be easier and longer periods of use are possible, making it a great choice for both professional and personal use.
The Smart Start® technology also makes the saw easier to start than other chainsaws. Additionally, the ergonomic design minimizes the strain on arms and shoulders, making this chainsaw even more user friendly.
All in all, the Husqvarna 450 Rancher is the perfect choice for anyone needing a powerful yet lightweight chainsaw.
What does MS stand for on Stihl chainsaws?
MS on Stihl chainsaws stands for “Mini Boss”, which is a series of small, lightweight chainsaws designed for frequent, less-demanding cutting tasks. They are designed to be handy, reliable, and easy to operate with minimal effort, making them ideal for clean-up work, pruning and cutting firewood.
The Mini Boss series of chainsaws from Stihl is equipped with features like: Ergonomically designed side-mounted chain tensioner for easy adjustment; dual-trigger safety switch; and a premium fuel mixture for increased efficiency.
The MS series also includes a number of Stihl’s anti-vibration designs, which reduce fatigue and improve operator comfort.
How much do Stihl chainsaws weigh?
The weight of Stihl chainsaws varies depending on the model you choose. Generally speaking, their gas-powered chainsaws range from about 10.8 to 22.5 pounds, with the heavier models offering more cutting power.
Their electric models range from about 8.8 to 10.1 pounds. Additionally, Stihl offers a battery-powered chainsaw that weighs in at 14.8 pounds.