Drawer hardware refers to the various components used to construct a drawer and enable it to open and close smoothly. Common drawer hardware includes slides (or tracks), knobs and pulls (for opening and closing), drawer stops, and drawer runners.
Slides are the mechanism that enable a drawer to move in and out of a cabinet. They come in both side-mount and bottom-mount varieties, and can be mounted either above or below the drawer. Knobs and pulls are affixed to drawers so the user can easily open and close them.
Knob and pull styles vary widely, ranging from vintage to contemporary, and can be selected to match the overall style of the room. Drawer stops keep drawers from opening too far and damaging walls or trim.
Drawer runners are clips that are mounted on the underside of the drawer to facilitate smooth, consistent movement.
What are the knobs on cabinet doors and drawers called?
The knobs on cabinet doors and drawers are called drawer pulls, handle pulls and door pulls. They are metal items that are attached to the door or drawer to make it easier to open. And they are often made of metal such as brass, bronze, chrome, nickel, steel and ceramic.
They can be ornate and decorative or simple and utilitarian. Knobs are typically round and have a post, while pulls have a straight or curved arm that is connected to the door or drawer. Pulls come in many different sizes and designs and can be used to add a decorative touch to any space.
They can also add a certain level of sophistication to a piece of furniture or cabinet.
What is the difference between a knob and a pull?
The main difference between a knob and a pull is the way each is used for opening or closing cabinet doors and drawers. A knob is a single, cylindrical piece of metal or plastic that is screwed onto the outside of a cabinet door or drawer and is rotated to open and close the door or drawer.
A pull, on the other hand, is typically a two-piece metal or plastic component consisting of both a handle and a plate that are installed on the front of a cabinet door or drawer and which requires a grasping motion in order to open or close it.
Knobs are generally smaller than pulls, and offer a more traditional look. Pulls are typically larger and more modern.
Should I Use drawer pulls or knobs?
When it comes to deciding between drawer pulls or knobs, it really depends on the look and style you want to create. Drawer pulls are a longer handle option and often look better when used with larger drawers.
They are also easier to grip than knobs and can provide a larger surface area for larger hands to use. Knobs, on the other hand, offer a more minimalistic look and can be great for smaller drawers. They are also easier to install and replace, as they secure with a single simple screw in the majority of cases.
Ultimately, the decision should come down to the look and style you want to create with your drawers and how easy they need to be for the people using them.
What is a cabinet pull?
A cabinet pull, also known as a drawer handle or drawer pull, is a handle or knob that is used to open and close a drawer or cabinet. Cabinet pulls are easily identifiable as horizontal or vertical mounted bars, discs, or handles in an array of sizes, shapes, and materials.
Cabinet pulls can be found in any material from wood to metals, ceramics, and plastics. In addition to providing a more aesthetically pleasing look, cabinet pulls make it easier to open cabinets and drawers due to the extended handle design.
In combination with other storage modernization solutions, cabinet pulls can be an ideal choice for those wanting an accessible, functional, and attractive storage system.
Do you put knobs or pulls on kitchen cabinets?
When deciding what kind of hardware to use for kitchen cabinets, your choice generally comes down to knobs or pulls. Both knobs and pulls have their own benefits and drawbacks, so it’s important to consider how they’ll fit with the look of your kitchen before you make a decision.
Knobs are often preferred in traditional, classic kitchens. These good-looking pieces of metal or porcelain can be used to add a touch of personality and design to the cabinets and drawers. Knobs are also easy to install and relatively inexpensive.
However, knobs make drawers harder to open than a pull. Knobs also generally require two hands to open, whereas pulls can be operated with one.
On the other hand, pulls are better for modern, minimalistic, and contemporary kitchen designs. Pulls are usually more stylized than knobs, allowing them to really stand out and become a design element in their own right.
Pulls also make it easier to open drawers; all you need is one hand to grab the handle and pull. They’re also more versatile in design than knobs.
Ultimately, the choice of whether to use knobs or pulls on your kitchen cabinets comes down to what fits best with the overall style of your kitchen. So, take some time to consider the look of your kitchen cabinets, and pick whichever option will provide the desired visual appeal while still offering maximum functionality.
Can you mix pulls and knobs on cabinets?
Yes, it is perfectly acceptable to mix pulls and knobs on cabinets. This can be a great way to add visual interest to a kitchen or bathroom area, as the combination of pulls and knobs will draw attention.
Depending on the type of cabinet, where they are located, and how they’ll be used, pulls or knobs can be chosen with specific placement and function in mind. If a cabinet is too wide for two knobs, a single pull may be used instead.
On the other hand, a pull may be used in addition to a knob if it’s located near the top of the cabinet and needs to be opened with greater force. Plus, mixing the two can be an easy and affordable way to give an old kitchen or bathroom a fresh new look.
Are pulls more modern than knobs?
When it comes to the question of pulls being more modern than knobs, it is largely subjective. While knobs have been used for centuries in cabinetry, pulls have become more prevalent in modern design.
Because of their increased visibility, pulls can provide a more definitive statement in a modern setting. They can also give more texture and visual interest to cabinetry, which can be more difficult to achieve with knobs.
Additionally, pulls come in a variety of sizes and styles, so it may be easier to find ones that match the desired aesthetic of a modern setting. Many pulls also feature a profile that is slick or minimalistic, which offers a more contemporary look and feel.
Kichens and bathrooms especially have seen a shift to pulls due to their modern appeal and user-friendly function. Paired with the increased visibility, pulls also make it easier for people to open cabinets, drawers, and cupboards, which presents more of an ergonomic advantage.
Ultimately, the decision of whether pulls or knobs are more modern will depend on the unique look you’re trying to achieve. Both styles can be mixed and matched to provide the perfect blend of modern function, form, and visual character.
What size are dresser knobs?
Dresser knobs come in a variety of sizes, shapes and colors. Common sizes (in diameter) range between 1/2 inch to 2 1/2 inches. However, you can find much larger dresser knobs if needed, as a lot of retailers offer up to 4 inches in diameter.
Additionally, you can find some odd-sized knobs such as stainless steel, with sizes in between all of the common sizes. When choosing, consider the size and style of the dresser you have, your preferred aesthetic and the other hardware that you already have in the room.
Are all drawer knobs the same size?
No, all drawer knobs are not the same size. Depending on the size of the drawer, the size of the knob will vary. Generally, large drawers need larger knobs, while small drawers typically require smaller knobs, but it is not a hard and fast rule.
You will want to measure the length and width of the drawer and use a knob that fits the dimensions. It is also important to measure the thickness of the drawer face and make sure the knob will fit and can be mounted properly.
So you can easily find the right one for your drawer.
How are dresser knobs measured?
Dresser knobs are typically measured in inches, though some can also be measured in millimeters. The size of the knob is measured from the center of the knob to the outside edge. This measurement is referred to as its “diameter”.
The versatility of knob sizes enable them to be used on various dresser styles such as antique, modern or rustic. Typically, the most common size ranges from 1 1/4” diameter to 2” diameter. The smaller sized knobs are often used on larger dressers while the larger knobs are able to be used on smaller pieces.
When measuring the knob size, it’s important to remember that the measurement is taken from the outside edge to the center of the knob. You’ll likely want to measure the hole in the dresser as well to ensure that it’s the right size for the knob you’re selecting.
Also, consider the style of the dresser when selecting a knob size, as the visual impact can make a difference in the look and feel of the dresser.
Are drawer pulls a standard size?
No, drawer pulls are not a standard size. The size of a drawer pull can vary greatly depending on the type, style, and design of the pull. Generally speaking, drawer pulls come in two standard sizes: small, which measures approximately 3 inches, and large, which measures approximately 6 inches.
However, there are many creative variations of drawer pulls available in a variety of sizes such as short, medium, and extra-long. Some very small pulls may even measure as short as 1 inch, while larger pulls may be as long as 8 inches or more.
Additionally, pulls come in a range of shapes such as rectangular, oval, and round. These factors all come into play when selecting the right size for a particular project.
How do I know my drawer pull size?
To determine the size of your drawer pull, measure the distance between the two screw holes on the existing pull. Generally, an industry standard calls for 3” between the two screw holes. However, it is important to measure the pull you are replacing to make sure the size is correct.
In addition to the distance between the two screw holes, also consider the size of the backplate or knob attached to the drawer pull. It is important to make sure the size of the new pull is compatible with the current style and size of your cabinets.
How do you measure for new cabinet knobs?
Measuring for new cabinet knobs is relatively straightforward. You should measure twice from the center of the mounting holes to ensure the accuracy of your measurement. To get the width of the knob, measure from one mounting hole to the other.
To find the height of the knob, measure from the inner part of the mounting holes to the topmost edge of the knob. It is a good idea to bring the old knobs with you when shopping for new ones so you can be sure that the size you choose is correct.
Additionally, some knobs come with screws of different lengths, so you may need to measure the thickness of the cabinet door or drawer front to ensure the screws are the right length. Lastly, make sure that the knobs you buy are compatible with the existing mounting holes in your cabinets, as some knobs require special drilled holes.
How do you measure and install drawer pulls?
Measuring and installing drawer pulls is a relatively simple process, but accuracy is key to ensure a good fit. Before beginning, you’ll need to measure the distance between the top and bottom screws.
This will help you purchase the correct length of drawer pulls. For installation, add the screws to the drawer pull and mark their position on your drawer. Then, drill two shallow pilot holes in the designated area.
Use a drill bit the same size as your screws for the best accuracy. Next, insert the screws into the pre-drilled holes. Finally, thread the drawer pull onto the screws, and use a level to ensure it is sitting evenly.
Once the pull is secure, you can enjoy the new look you’ve created in your kitchen or bathroom.
What is the rule of thumb for cabinet hardware?
The general rule of thumb for cabinet hardware is to keep things uniform. All the knobs, pulls, and hinges should be the same finish in a kitchen or bathroom to give it a cohesive look. If you’re looking for a unique design, choose one type of hardware for each cabinet to create a focal point.
Although it may not be necessary to keep the knobs, pulls, and hinges the exact same for each cabinet, be sure that all three coordinate together in terms of material, shape, color, and style. Using the same brand can also help to keep things uniform.
Additionally, if the cabinets are symmetrical, choose the same number of knobs, pulls, and hinges. If the cabinets are not symmetrical, vary the style and number of knobs and/or pulls on each cabinet as needed.
Having a mix of these elements can be a great design feature, but be sure to keep the look coordinated to help achieve a unified aesthetic.
What is projection in knobs?
Projection in knobs is a feature where the knob projects from the surface of the material in which it is mounted. This type of knob usually has a protrusion on the back that extends out from the material, providing an easy way to grip and turn the knob.
Projection knobs are often used in both commercial and residential applications, often on cabinets and drawers. They can be round, square, flat, or textured to give a secure grip and come in a variety of finishes to match the decor of the room.
Projection knobs come in a variety of styles, sizes and materials, giving many options to choose from. They can be used to open or close doors, windows, drawers and appliance fronts. They are an attractive and practical way to update the look of any room.
What is the proper placement for cabinet knobs?
The proper placement for cabinet knobs depends on the configuration of your cabinets. Generally, the knobs should be installed in the middle of the vertical stile (the long parts of the cabinet frame that run up and down) or at the top of the door/drawer.
If you are installing multiple knobs on a door, they should be evenly spaced along the vertical stile or evenly spaced between the top and bottom of the door/drawer. It is recommended to use a tape measure or ruler to ensure even spacing.
Depending on the type of door or drawer, you may need to use different size knobs to create a symmetrical look. Additionally, you should use the right type of screws to ensure a secure fit. Installing the knobs too close to each other or too low on the door can cause strain on the door, which can lead to them breaking or loosening over time.
It is also recommended to use knobs with an extended bolt if your doors are thicker than ¾ inches. These longer bolts will enable you to install the knobs securely.
What size pulls for 36 inch drawers?
When selecting pulls for drawers, you should choose ones that are proportionate to the size of the drawers. For 36 inch drawers, it is recommended to choose pulls that are approximately 6 inches long.
Keep in mind that it is also important to consider the size of the drawer fronts as well when choosing pulls, as these may be slightly different dimensions than the drawer boxes themselves. It is generally recommended to choose pulls that are either a little bit wider or a little bit narrower than the width of the drawer fronts.
Additionally, the material of the pulls should also be taken into consideration. Pulls made of metal, wood, ceramic and even glass are widely available in various sizes and can add a unique touch to the drawers.
What is a standard size knob?
A standard size knob typically varies by application and is often sold as a generic knob, meaning it can be made to fit a variety of applications. The most common diameter size for a standard knob is 1″ and the height is typically between 0.5″ and 1.
5″. When considering different types of standard sizes, it is important to note that there are several variations in mounting style that could affect the overall size. Different mounting styles, such as push-fit, threaded, and press-fit will have slight variations in size, shape and material types, which need to be taken into account when selecting the right knob for the application.
In addition to standard knob sizes, there are also specialty sizes designed for specific tasks, such as locking knobs for security purposes, or knobs with multiple control points that can be used for fine-tuning.