Cushion covers can be made from a variety of materials, depending on the style and look you’re going for. Natural materials such as cotton, linen, jute or hemp are popular options as they’re breathable and add a luxurious softness to any space.
Synthetic materials such as polyester or synthetic blends provide additional durability and may be easier to maintain. Alternatively, heavier fabrics like velvet, wool and leather offer a more durable and luxurious look.
If you’re looking for something a bit more unique, you can have cushion covers made from exotic materials like silk, bamboo or cashmere. No matter what material you choose, it is important to keep in mind how much wear and tear the cover will be subject to before making your decision.
How do you make cushion covers step by step?
Step 1: Pick the fabric for the cushion covers: Choose a durable and washable fabric for your cushion covers, such as cotton, linen, or canvas. Avoid thin and delicate fabrics.
Step 2: Measure your cushions: Take accurate measurements for the cushion pad and create a pattern for them. Measure the length and width of each cushion, and then add an extra 1/2 inch to each measurement for seam allowance.
Step 3: Cut the fabric: Lay out the fabric on a flat surface and cut it according to the measurements. Make sure to cut two pieces of fabric for each cushion cover—one for the front of the cover and one for the back.
Step 4: Sew the cushion covers: Pin the two pieces of fabric together, right side in, and sew them along all four sides, leaving a 2-3 inch gap along one side. Press the seam allowance with an iron.
Step 5: Turn the cushion cover inside out: Pull the fabric through the gap and turn it inside out through the gap, carefully pushing out the corners with a blunt-end tool.
Step 6: Tuck in the gap and topstitch: Press the edges of the gap flat and then tuck it in. Sew around the perimeter of the cushion cover with a topstitch for a finished look.
Step 7: Insert the cushion pad and close the gap: Insert the cushion pad inside the cover and then sew the gap closed. This completes the cushion cover!
Is it hard to reupholster a cushion?
Reupholstering a cushion is generally not a difficult task, though it will require some patience and dedication. First of all, you’ll need to figure out the size and shape of the cushion and buy the necessary materials, such as fabric, cushion stuffing, and tools like pins, tape measure, seam ripper, needle and thread.
Once you’ve gathered everything you need, you’ll need to remove the old fabric from the cushion. Take your time in this step and be very careful not to tear or damage the old fabric. After that, measure the cushion and cut the fabric accordingly.
Next, pin the fabric in place, turn the cushion over, and stitch the fabric onto the cushion. After that, you can add a zippered closure, if desired. Finally, stuff the cushion with cushioning material and you’ll be ready to enjoy your newly reupholstered cushion.
How much material do I need for a cushion cover?
For making a cushion cover, you will need to consider the size of the cushion you are covering, as well as the desired style. Generally, for a standard 16-inch cushion cover, you will need to buy around one yard of fabric.
If you are looking for a looser fit, adding a few extra inches will be necessary. If you want the cushion cover to be more tailored and neat, you will want to add a half-inch seam allowance, which means you will need an extra inch of fabric for every side of the cushion.
In addition, if you plan to add any decorative touches such as buttons, zippers, ties, or trim, you will need extra fabric for those as well.
How much bigger should a cushion cover be than the cushion?
The size of cushion cover will vary depending on how loose or tight a fit you would like. As a general rule of thumb, the cushion cover should be 1-2 inches bigger than the actual cushion, with most people aiming closer to two inches.
This will allow room for the cushion to be inserted into the cover and will also reduce the chances of the cover being stretched too tightly and potentially tearing. The extra give also leaves room for adapting the cover to fit the cushion size better or to fit pillow forms and inserts that are slightly bigger than the cover.
These measurements should be taken from the seam to seam measurements of the cushion to ensure you are measuring correctly. Additionally, it is also important to account for any seams, ruffles, and piping you plan to include when creating a cushion cover.
You should also be sure to add an extra inch or two to the measurements to accommodate for any mistakes or fabric shrinkage.
How many yards is an 18×18 pillow?
An 18×18 pillow would require 108 square yards of fabric. If a pillow cover is being made, seam allowances of 1/2 inch would need to be added to the pillow size (18×18 plus 1/2 inch on each side). This would bring the total amount of fabric needed to 112 square yards.
How do I calculate how much fabric I need?
Calculating the amount of fabric you need is a relatively simple process, but it will depend on the type of project you are undertaking. If you are working with a specific pattern or instructions, the measurements will usually be calculated for you; however, for a general project, there are some steps to follow.
Begin by deciding the size of the project. This may be determined by a pattern, the size of the person it is for, or the use of the project (e. g. bed covering or wall hanging). Once you’ve chosen the size, measure the area that the project will need to cover.
This can be divided up into sections of length and width, such as a rectangle or a circle.
You need to then consider the fit of the fabric, whether you need more to allow for seems, or if you will want pleats, tucks or gathers. The typical ease recommended for clothing is 1-2 inches extra over the body measurements, and around 0.
5-1 inches for home décor projects. However, it is best to check the specific pattern you are using to see if different measurements are required.
When you’ve considered how much extra fabric will be needed, multiply the width of the area you’re covering by the length and then add two inches for a seam allowance. This total should be multiplied by the numbers of widths of fabric you will need to reach the same length.
The end amount should be your total fabric yardage required for the project.
It’s important to be precise when calculating your fabric needs. If the fabric is expensive or hard to source, it’s a good idea to get a little extra to ensure you have enough.
How do you knit a simple cushion cover?
Knitting a simple cushion cover is a great way to learn how to knit and add a unique and personal touch to your home decor! Here’s a few simple steps to get started:
1. Choose your yarn and needles. Choose a medium weight yarn that is soft for your cushion cover. Depending on the size of your cushion, use circular socks needles or a pair of size 8-10 straight needles.
2. Cast on. To begin, cast on the desired number of stitches on to the needle. Make sure they are not too tight or too loose.
3. Knit rows. Start knitting rows in the stockinette. For one color, keep continuing in the same pattern. For multiple colors, alternate the colors after a few rows.
4. Cast off. After the desired number of rows of the cushion cover is complete, start the process of casting off the stitches. Bind off the remaining stitches and cut the excess yarn.
5. Join ends. Join the ends of the rows by using a yarn needle for seaming. This closes the cushion cover to form a pillow shape.
6. Add decorations. To finish off the cushion cover, you can add embellishments such as tassels, fringe, pom-poms, or buttons.
Finally, stuff the cushion with a polyester filling and enjoy the final product!
What size do I cut cushion covers?
The size of the cushion covers that you need to cut for your cushions will depend on the size of the cushions themselves, as well as any other decorative details that you wish to include on the cover.
When it comes to measuring for cushion covers, the most important measurements are the height and width of the cushion. You’ll need to measure from seam to seam, with the height measurements on the longest side and the width measurements on the shortest side, to ensure that you get the most accurate measurements.
Once you have your measurements, you’ll need to factor in seam allowances, which vary depending on the style of cushion cover you are making. Some styles will require a two-inch seam allowance, while other styles may require a three-inch seam allowance.
Make sure to add the necessary seam allowances to your measurements to get the correct sizing of your cushion covers.
Once you’ve calculated the correct measurements, you’ll be ready to cut out your cushion covers! Make sure to use a fabric marker to mark the pieces before you start cutting, as exact measurements will help ensure your cushion covers fit properly.
Will an 18×18 pillow cover fit a 16×16 pillow?
No, an 18×18 pillow cover will not fit a 16×16 pillow insert. Pillow covers come in a variety of sizes, and a 16×16 pillow requires one that is sized to fit the insert. If you try to use an 18×18 pillow cover on a 16×16 pillow insert, it will be too large and will not fit the insert properly.
Therefore, it is best to use a pillow cover that is designed to fit the size of the pillow insert, such as a 16×16 pillow cover.
How big do I cut fabric for an 18 inch pillow form?
When cutting fabric for an 18 inch pillow form, you will need to cut out square pieces of fabric that measure 20-22 inches for the front and back panels. This accounts for the seam allowance of ½ inch on each side.
For the best fit, it is recommended to use a ½ inch seam allowance. If you are cutting a patterned fabric, be sure to take extra measures to keep the pattern lined up and square on both panels. Additionally, if you are adding an invisible zipper, an additional ¼ inch should be added to the seam allowance.
Therefore, a final square measurement of 20 ½ inches would be the ideal size for a pillow cover with an invisible zipper.
What size pillow do you put in a 18×18 cover?
The pillow size you would typically put in a 18×18 pillow cover will depend on the type of pillow you are looking for. If you are looking for an overstuffed decorative pillow, you might want to consider a 20×20 size pillow.
If you are looking for a pillow that is more of a lumbar or neckroll pillow, then you might want to consider a 16×18 size pillow. Additionally, if you are looking for a more slender pillow, like a bolster, you could use a 12×18 size pillow.
Ultimately, the size of the pillow you should choose for your 18×18 pillow cover will depend on the look that you are going for and the shape of the pillow that you are wanting to fit.