The size of chainsaw for cutting firewood depends on the individual’s preferences and needs. In general, a chainsaw with a medium size engine, usually a 50cc to 70cc, is most suitable for cutting firewood.
It’s important to consider the size of the wood you’ll be cutting since larger size logs may require a larger chainsaw with more power to complete the job. If you are using the chainsaw mainly for cutting firewood or logs that are around 16” in diameter, a 16” bar that runs between 50cc and 62cc should be sufficient.
If, however, you need to cut larger logs, it’s advisable to go with a bigger saw equipped with a 20” or 24” bar and engine of 70cc and above. Many chainsaws come with adjustable bars that are easily interchangeable.
This allows you to switch to larger bars when needed.
It’s also important to consider the chainsaw’s weight and ergonomics. A heavier and more powerful saw is less comfortable to use and may tire you out quicker. Aim for a chainsaw that’s easy and light to handle, but still has enough power to do the job.
Doing a little bit of research and looking at customer reviews and ratings will help you find the best chainsaw for cutting firewood that suits your needs.
Can a battery powered chainsaw cut down a tree?
Yes, a battery powered chainsaw can cut down a tree. A battery-powered chainsaw is a great tool to have when you need to do some light or medium-duty cutting, such as pruning branches or cutting smaller trees or logs.
They provide the convenience of cordless operation, and they’re usually lighter and quieter than gas-powered chainsaws. To cut down a tree with a battery powered chainsaw, you’ll need to take some safety precautions and make sure you’re using the right blade for the job.
Start by checking all the safety gear you will need and getting help if you are unsure about how to handle the chainsaw. When you are ready, choose the appropriate chain and make sure the chainsaw chain is tight and properly adjusted before cutting.
Before you begin, be sure to ensure that the tree is securely wedged and that you have a good support system in place in case the tree falls in an unexpected direction. Cut a notch in the trunk of the tree at a downward angle that is one-third of the tree’s diameter from the ground, then cut on the opposite side at the same angle toward the center.
Finally, cut the remaining section of the trunk that still hangs on the wedged side. Once the tree is cut, you can use the chainsaw to make smaller cuts to section the tree for easier removal. These steps should be taken with caution and care to ensure your safety.
Do loggers use electric chainsaws?
Yes, loggers often use electric chainsaws as one of their tools. An electric chainsaw is powered by an electric motor rather than by gasoline, which makes them quieter and more lightweight than a traditional gas-powered chainsaw.
Electric chainsaws are ideal for felling small trees, limbing, and bucking, making them an essential tool for loggers. Electric chainsaws also require less maintenance and are easier to start. Electric chainsaws have a more limited cutting capacity than gas-powered chainsaws, but they are safe, cost-efficient and more convenient for the workplace.
As a result, electric chainsaws are becoming increasingly popular with loggers who prefer the advantages mentioned above.
How do you cut down a tree without a pinching chainsaw?
Without a chainsaw, cutting down a tree can still be done, but it will require a bit of time and patience. The traditional way to take down a tree without a chainsaw is to use a combination of axes, wedges, and a leverage device.
Here are the steps needed to do this safely:
1. Start by using an axe or hatchet to create a cut at a downward angle into the tree trunk. This initial cut should be slightly to the opposite side of the tree’s natural lean.
2. Next, create a horizontal cut in the tree trunk that connects with the first cut. Make sure this cut isn’t too deep or else it could weaken the tree’s structure.
3. Insert wooden or steel wedges into the vertical cut you just made. Drive the wedges in with your axe or hatchet until a shallow gap is created. Make sure that the wedges are put in securely and can’t come out.
4. Use a powerful, long-handled lever bar to push against the wedges and create more separation. Keep pushing and working the wedges slowly until the tree begins to lean.
5. For the final touches, use your axe to make a few additional cuts into the side of the trunk that’s facing the direction you want the tree to fall. These cuts should go roughly halfway through the trunk.
6. When everything is set, use the lever bar for one final push and the tree should come down.
Cutting down a tree without a chainsaw may be time-consuming and require more effort, but with proper safety precautions and a bit of patience it can be an enjoyable and rewarding experience.
Who invented chainsaw?
The modern chainsaw was invented in the 1920s by the German engine-designer Andreas Stihl and the Austrian engineer Bernard Fleissner. Stihl conducted extensive research on power saws and he successfully managed to miniaturize a two-man crosscut saw and create a hand-held device.
Stihl and Fleissner began producing their first chainsaws in the late 1920s. Fleissner obtained a patent in 1926, and Stihl registered a patent for his chainsaw in 1929, after successfully proving its reliability and power.
The concept of a mechanized chainsaw for cutting wood dates back to the 1830s when a steam-powered saw was used. Later on, in the mid-1800s, cutting wood with a chainsaw driven by a powerful internal combustion engine was introduced in the United States and it spearheaded the advancement of the technology over the ensuing decades.
The first generation of electric chainsaws were produced by German manufacturer Dolmar in the 1940s.
Ever since, the technology behind chainsaws has been further developed and improved through the use of new materials, stronger power sources and innovative designs. Modern chainsaws are not only useful for carpentry purposes, but they are also widely used in forestry, construction, and agricultural professions.
What’s the angle to sharpen a chainsaw chain?
The angle to sharpen a chainsaw chain depends on the particular make and model of your saw and the type of chain being used. Generally, it’s recommended to follow the manufacturer’s instructions for the best results.
Generally, the angle should be between 30 and 35 degrees, and the depth gauges should be set at. 025″ from the cutter. In order to ensure the best performance of the chain, it is important to make sure that all angles and depths are correct.
Additionally, it is important to sharpen each side of the cutter the same amount. That way, the cutters strike each other as they come into contact, which help them stay sharp longer. It is also important to remove just enough metal when sharpening without taking too much material away.
Lastly, some chains may require a different angle than other chains, so instructs should be especially carefully followed.
How do I choose a chainsaw?
Choosing the right chainsaw for the job is an important decision that will affect the quality of your work and the safety of your project. Start by considering the amount of power you need, which will depend largely on the size and type of material you will be cutting.
Whether you will be cutting logs, firewood, limbs, or other materials, it’s important to consider the size and type of chainsaw that will be able to handle the job. It’s also important to select the right chain length, as this will determine the cut depth and the type of wood you can easily cut.
For homeowners who expect to cut only a few logs each year, an electric saw or a small petrol-powered saw with a guide bar up to 18 inches long should be plenty of saw. However, for more frequent users or for professional use, a more powerful saw with a longer bar is recommended.
Safety is also an important factor in selecting a chainsaw. Check that whatever chainsaw you choose comes with all the necessary safety components, such as an anti-kickback chain brake, a throttle lock, and an automatic chain oiler.
Also, make sure the saw has a functional chain catcher and vibration dampened handles to reduce fatigue and strain. Finally, consider any additional features that may improve safety and make your work easier, such as a carburetor preheat lever, a chain-tightening screw, and a chain tensioner.
With the right chainsaw, you can be sure you’re getting the job done quickly, safely, and effectively.
What is a tree cutter called?
A tree cutter is an arborist, logger, or other skilled tradesperson who is trained to use specialized equipment and/or techniques to safely fell, trim, lop and/or prune trees. Tree cutting is a dangerous profession and requires a high level of skill and finesse, as a wrong move could be fatal.
Therefore, it is always important to hire a professional tree cutter that has experience, proper safety training and is adequately insured. The appropriate equipment will also include safety gear and personal protective equipment, such as a hard hat, goggles, chainsaw chaps, hearing protection and waterproof boots.
There are different types of tree cutters, which include manual crosscut saws, pole climbing saws, gasoline or electric chainsaws, brush saws, and other specialized tools.
What is the name of tree cutting machine?
The name of tree cutting machine commonly referred to as a chainsaw, is a type of portable power-driven saw used for cutting tree trunks and large branches into manageable lengths. Chainsaws typically have a self-contained motor and a long, sharp rotating chain that can quickly and easily cut through wood.
Chainsaws are used in a variety of industrial uses, as well as for personal and landscaping projects. Chainsaws come in various sizes and power levels, and may be powered by electricity, gasoline, or even battery.
Chainsaws can be used to cut wood into logs for burning, to create firewood, or to cut trees into chunks or slices for easy disposal.
What are used to cut down trees?
Logging is the process of cutting down trees, which is usually done by a trained professional with specific tools and machinery. Loggers typically use chainsaws, feller bunchers, harvesters, felling harvesters, and delimbers.
Chainsaws are the most commonly used tool for cutting down trees, as they allow loggers to quickly remove trunks and limbs. Feller bunchers are vehicles equipped with grapples and saws that grab and cut down several trees in one pass.
Harvesters are larger machines that cut branches from tree trunks, chip the smaller branches, and stack the logs for transport. Delimbers are specialized machines that are used to measure and cut logs into precise lengths.
All of these tools are necessary for effective logging operations.
What does MS mean in Stihl chainsaw?
MS stands for “Multi-System”, which is a term used by Stihl to describe the ability of their chainsaws to use a variety of accessories and attachments. These accessories and attachments allow the chainsaw to be used for a wider range of tasks and make it more versatile.
Stihl’s MS system includes attachments such as saw blades, different sized cutting bars, pruning blades, hedge trimmers, and more. This technology makes Stihl chainsaws some of the most powerful and versatile on the market.
How much does a Stihl MS 362 cost?
The price of a Stihl MS 362 depends on where you purchase it and any promotions running at the time. Generally speaking, the Stihl MS 362 costs between $499.95 and $600 at most retailers. The price includes the chainsaw and a starter kit (chain, file, oil).
Purchasing additional accessories, such as extra chains, chainsaw bars, and scabbards may increase the overall cost. The Stihl MS 362 is an excellent chainsaw for both professional and home use, so it is worth the price for anyone who plans on regular chainsaw usage.
Can I use chainsaw to cut wood?
Yes, you can use a chainsaw to cut wood. A chainsaw is a tool equipped with a set of sharp teeth connected to a rotating chain that runs along a guide bar. It is used for cutting through thick pieces of wood, tree limbs, logs, etc.
It is a versatile tool that can be used outdoors or indoors to process wood faster than other manual cutting tools. When using a chainsaw to cut wood, you should make sure to wear the correct safety clothing and follow the instructions supplied with the chainsaw.
You should ensure that you are working on a stable surface, do not overreach and that you keep the saw in front of you and close to your body. You should also keep your free hand away from the blade and the chain when it is on.
Finally, it is important to remember to switch off the saw when you are not using it and to store the saw in its protective cover when not in use.
What is the H and L on a Stihl blower?
The “H” and “L” on a Stihl blower refer to the two different speed settings. The “H” stands for high, which is the faster setting, and the “L” stands for low, which is the slower setting. Depending on the model, the speeds vary from low speeds of around 170 mph up to high speeds of over 200 mph.
Generally, the lower speed setting is for normal operation, such as blowing away leaves and other lightweight debris, while the higher speed setting is used for tougher jobs, such as blowing away heavy, wet debris or snow.
It is important to select the right speed setting based on the job you are doing, as using too high a setting can damage your blower, while using too low a setting will not give you optimal performance.
What do the high and low screws do on a chainsaw?
The high and low screws on a chainsaw are used to adjust the engine’s idle speed. The low screw controls the idle speed when the saw is loaded with a full chain, while the high screw controls the idle speed when no load is present.
The idle speed of your chainsaw should be set to keep the engine from stalling or running too fast. The higher the idle speed, the better the saw will run, but if it is set too high, it can burn out the clutch and cause the saw to run poorly.
It is important to adjust the screws correctly for proper engine performance and to avoid damage to the saw.
How do you adjust a high speed screw on a chainsaw?
Adjusting the high-speed screw on a chainsaw can be done by first making sure the chainsaw is off and the bar and chain are clear of any obstructions. Next, locate the high-speed screw on the side of the muffler.
It should be a black Phillips screw slightly recessed in the housing. Using a flathead screwdriver, turn the screw all the way counterclockwise and then turn it one full turn clockwise. If the engine is still running too slow, turn the screw another half turn clockwise.
Turn the screw counterclockwise if the engine is running too fast. Once the correct rpm is reached, start the chainsaw and ensure it is performing correctly. If not, repeat the previous steps until the desired results are achieved.