The size of a standard turntable is typically 18” wide, 14” deep, and 4” tall. The actual platter which holds the vinyl record can vary depending on the size of the tonearm being used but is usually 12” in diameter.
It is important to make sure you have enough clearance around the turntable in order to properly operate it. Space around the turntable should also be considered as vibration can affect sound quality, so it is important to make sure that it is placed on a sturdy and stable surface such as a stand or table and away from speakers, amplifiers, and other components to ensure optimal performance.
How high should turntables be?
The optimal height for most turntables is roughly the same height as your DJ mixer or CD players. This is usually between waist and chest height, depending on your height and position at the mixer. Turntables should not be too low, as it can cause strain on your neck and back when trying to look at the record.
On the other hand, they should not be too high, as it can make it difficult to move the tonearm and needles correctly. To ensure correct ergonomics, your turntable stands should also be level and stable.
Additionally, the counterweight on the tonearm should provide balance and the headshell should sit at a level that is not too high or too low.
Are most record players 12-inch?
No, not all record players are 12-inch. The size of the record player’s turntable dictates the size of records that it can accommodate. Generally, record players are available in three sizes – 7-inch, 10-inch, and 12-inch – and are characterized by their playing speed (measured in revolutions per minute, or RPMs), which ranges from 78 RPMs to 45 RPMs.
7-inch records are typically used to play singles and EP vinyls, as they spin at 45 to 78 RPMs and can accommodate a single song (or a few if they are part of an EP). 7-inch records are popular among casual listeners and those who prefer to listen to singles.
10-inch records are generally used to play LPs and can spin between 33 and 45 RPMs, allowing for a longer playing time than 7-inch records. 10-inch records usually contain an album’s worth of music, or roughly 20 to 25 minutes of playing time.
Finally, 12-inch records are the most common record size and are used for both LPs and extended plays. These records can spin at 33 and 45 RPMs, and can accommodate up to 25 minutes of playing time on both sides.
12-inch records are popular among audiophiles, who often prefer the larger size and better sound quality they offer.
It is important to note, however, that the size of the record player is not necessarily an indication of the type of records that it can accommodate. Many record players are capable of playing multiple sizes of records, making them a great choice for collectors who are looking for flexibility when it comes to their listening options.
What are the dimensions of a record?
The dimensions of a record vary based on the type of record. The most common dimensions are 12 inches in diameter and 1/16″ thick. However, other sizes such as 10-inch, 7-inch and even 5-inch records exist.
The 12-inch record is the largest format and usually has more information than the others. The groove in the record is usually 0.006 inches wide and has a pitch of 2.5 – 2.75 mil, though some stereo records may have grooves that are narrower than this.
Records are generally made from plastic, and the material used for the grooves is typically metal such as aluminum or bronze. They can also be made from paper, or other materials such as metal coated with wax, fiber, or lacquer.
How tall is a vinyl record case?
The height of a vinyl record case varies depending on the type and style of case. Standard 12-inch record cases typically measure 13.6 inches in height, while 7-inch record cases are typically about 10.
6 inches in height. There are also taller cases that are used to hold multiple records. These cases measure around 16-17 inches in height and can hold anywhere from 3 to 5 records depending on the size.
If a record collector has enough records, they may even get a taller filing cabinet style case that can hold up to 40+ records.
How big is a 12-inch vinyl?
A 12-inch vinyl is approximately 12 inches in diameter. This size is typically used to create large-format records. Its size provides a greater surface area for audio information, allowing records to carry anywhere from one song to an entire album.
The grooves on the vinyl are very small, so the overall width of the record when the grooves are considered is around 6 to 8 inches. This allows the listener to get a better sound quality when the record spins.
A 12-inch vinyl is typically thicker than a 7-inch record, so it can hold more audio information and play for a longer period of time.
Do records fit in cube shelves?
Yes, records can definitely fit in cube shelves. Cube shelves are a great option for storing and displaying vinyl records, as they are usually quite lightweight and can be easily moved around. Cube shelves typically have compartments that are just the right size for most vinyl records and covers, allowing you to store and organize your records neatly.
These shelves can also be a visually appealing way to show off your vinyl collection as many come in different colors and finishes.
What size frame do I need for a vinyl record?
It depends on the size of the record. Most vinyl records are either 7″ or 12″ in size. That is the diameter of the vinyl itself—though the actual size of the record cover, label, and sleeve can be different.
If you’re looking for a frame for a 7″ record, you can usually find a frame that’s around 8″ x 8″, although some manufacturers also make frames that are 7.5″ x 7.5″. For a 12″ record, the frame should be around 13″ x 13″, although the sizes may vary depending on the frames that the frame manufacturer creates.
When in doubt, always measure your record cover, label, and sleeve to make sure the frame will be large enough.
What is the difference between 7 inch and 12-inch vinyl?
The vinyl record industry has two very distinct sizes, 7-inch and 12-inch vinyl. Each type of record generally comes in a different form, with the 7-inch being much more popular. The actual physical size difference between the two record sizes is easy to see, with the 12-inch vinyl being noticeably larger than the 7-inch.
But the size difference goes further than just their physical sizes. Along with having different physical sizes, the two vinyl types also have different audio qualities. Generally, the 7-inch records have a less rich sound, as they have fewer grooves per inch, allowing for less music per side.
12-inch vinyl records, on the other hand, are characterized by deeper, higher fidelity sound, as they have more grooves per inch, allowing for more music per side.
The length of each track on a record also differs between the two sizes of vinyl. A 7-inch vinyl record will typically have two tracks per side, with the tracks usually less than five minutes long. A 12-inch record, meanwhile, typically has only one track per side, with each track usually between five and eight minutes long.
In summary, the 7-inch and 12-inch vinyl records are two distinct types of vinyl, with their differences lying in the physical size, audio quality, and track length.
Can any record player play 7 inch?
Yes, any standard record player should be able to play 7 inch records, as long as it is compatible with the type of record (45 RPM or 33⅓ RPM). 45 RPM records are typically single-sized, while 33⅓ RPM records are either single or double-sized.
Most turntables have adjustable settings to accommodate different speed and size records. Usually, they will have a switch labeled 33 RPM or 45 RPM. If the record player does not have this option, you can usually adjust the speed manually.
Check the specifications of your particular turntable to ensure that it can play 7 inch records.
What is a 7 inch single?
A 7 inch single is a format of vinyl record featuring two songs, with one song on each side of the record. This format was popular in the 1940s through the 1960s. Unlike traditional albums, 7 inch singles typically feature either an A-side single, which was intended as the main appeal of the record, or a B-side single, which was typically either a remix of the A-side single or an extra song.
7 inch singles were designed to be played on small, portable record players. They are still sought after by music collectors for both their nostalgic value and for the ability to experience songs on a physical medium.
Are 45 records worth anything?
The answer to this question depends on the specific records in question. In general, 45 records can have a range of values, from a few dollars to several hundred or even thousands of dollars. Factors including the title, artist, record label, condition, and rarity can all contribute to determining the value of the record.
Collectors may be willing to pay more for historic recordings, funky rarities, or records autographed by the artist. It’s also important to consider the condition of the record — 45s that were never played or were well taken care of will usually be more valuable than those with scratches or damage.
If the record is still in its original company sleeve, that can increase its value as well. All things considered, the best way to answer this question is to do research on records like yours and see how much similar items are being sold for.
That will give you an idea of a realistic price range that people are paying for the record.
How do you play 7 on a vinyl record?
Playing a vinyl record requires the use of a turntable, which is an electronic device that rotates a vinyl record at an adjustable speed to playback audio. To play a record on a turntable, make sure it is set up properly and that the stylus is in good condition.
Clean the record with a lint-free cloth to remove any dirt or dust before playing. Place the record on the turntable and turn the start switch counterclockwise to lower the stylus onto the record. The start switch will be powered and the stylus will touch the record.
Adjust the pitch, speed, and volume before playing the record. Make sure the turntable is level and that the weight of the stylus is correct to ensure correct sound. When you’re done playing the record, press the start switch to move the stylus off the record, move the tone arm to the side, and turn off the power.
You should also remove the record from the turntable and place it back in its dust cover to protect it.
Why do 7 inch records have a large hole?
7 inch records are designed to be spun at a faster rate than larger records, such as 12 inch and 10 inch records. The larger the record, the slower the speed it needs to spin at to properly reproduce the sound.
To accommodate this, a 7 inch record has a large hole in its center, allowing a smaller spindle to be used while spinning the record. This also helps preserve the record, as the smaller spindle exerts less pressure on the record as it spins.
Additionally, because the center hole is larger, it provides extra stability and support to the record, allowing it to stay in place better and reducing the potential for it to warp.
What is the standard vinyl size?
The standard vinyl size is 12-inches in diameter. These 12-inch vinyls have been the industry standard for over 50 years, with the first vinyls released in the early 1960s. The standard 12-inch record originally had a playing time of around 4–5 minutes per side, but this has since increased to around 7–8 minutes per side thanks to technological advances.
12-inch vinyls are commonly used by DJs and nightclubs as they provide greater flexibility with regards to mixing and remixing music. Additionally, they typically offer a warmer, richer sound that is favored by many music aficionados.
Larger vinyls do exist in sizes such as 10, 12 and 16 inches but these are not so common and are typically used for a limited selection of titles. They are often best suited to classical music as they offer extended play times, allowing multiple tracks to fit onto a single side.
Similarly, the smaller 7-inch vinyls are often used for singles, and are a popular choice for jukebox enthusiasts.