When it comes to the size of cabinet needed for a microwave, it depends on a few factors such as the size and capacity of the appliance, the available space in the kitchen, and the desired location of the appliance.
Generally, a standard-sized microwave (usually 24–30 inches wide) requires a cabinet space of at least 15 inches wide and 12–14 inches deep. For larger over-the-range microwaves, you’ll need a minimum space of 30 inches wide and approximately 18 inches deep.
Built-in microwaves come in a variety of sizes, so you’ll need to take accurate measurements to ensure the cabinet will accommodate your unit. When in doubt, it’s always best to follow the manufacturer’s instructions.
How deep does a cabinet need to be for a microwave?
The depth of the cabinet that is needed for a microwave will depend on the size of the microwave. Most countertop microwaves measure between 10-13 inches deep, but some of the larger models can measure as much as 16 inches deep.
Therefore, it is recommended to install a cabinet that is at least 16 inches deep if you are installing a larger microwave. Keep in mind that different models of microwaves may have different requirements, so it is important to check the specifications of the particular model before you start making any changes to the cabinet.
Additionally, it is also important to take into account any other appliances or items you may also be storing in the cabinet when deciding on the required depth.
Can a microwave fit in a 24 inch cabinet?
Yes, a microwave can fit in a 24 inch cabinet depending on the size and model of the microwave. Most microwaves range anywhere from 16 to 24 inches wide and 14-22 inches in height. Of course, it’s also possible to install a built-in microwave unit or an over-the-range microwave, which would require some remodeling to do.
Before purchasing a microwave, it’s best to measure the interior of the cabinet to ensure you get one that will fit. Additionally, if you’re looking for a larger unit that may not fit in your current cabinet, you could consider adding additional cabinets or replacing the existing ones.
What are the dimensions of a Sharp microwave drawer?
The dimensions of a Sharp microwave drawer depend on the specific model. That said, all Sharp microwave drawers have a width of 30 inches, but the drawer height and total height vary. For example, the SMD2470ASY model has a drawer height of 4 inches and a total height of 15 15/16 inches, while the SMD3070ASY model has a drawer height of 9 15/16 inches and a total height of 16 13/32 inches.
Additionally, the depth of all models is 23 3/8 inches and the cavity interior of all models measures 11 7/16 inches in width, 20 7/8 inches in depth, and 9 7/8 inches in height.
Where should a microwave drawer be placed?
The ideal location for a microwave drawer is typically placed under a kitchen countertop. This is because it is both functional and unobtrusive and helps free up countertop space. If the countertop is not deep enough, you can also try mounting the microwave under a wall cabinet.
Placement is important because to ensure the appliance is installed at a proper distance from other appliances and surfaces. It should be aware at least one inch away from a combustible surface, such as a wall, and must have enough room to open the drawer freely.
Wherever you choose to place your microwave drawer, make sure it’s at least three feet away from any combustible materials such as curtains and other fabric surfaces.
How high should an over the range microwave cabinet be?
When installing an over the range microwave, it is best to place the bottom of the microwave cabinet at least 15 inches above the stovetop. From there, it is largely dependent on preference, but it is recommended to keep the bottom of the cabinet between 54 and 57 inches from the floor for best results.
Installing the cabinet too high may create an uncomfortable reach, while installing it too low may cause the range hood to not function properly. It is also important to make sure that the space used for the cabinet allows the door to open above the stovetop, as well as clearance space above the microwave.
For most circumstances, it is recommended to keep the center of the microwave around 18 inches from the bottom of the cabinet.
How much space is needed around a microwave?
When it comes to microwaves, the general rule of thumb is that the area around the appliance needs to be at least three feet of clear space. This means that there should not be items, cabinets, shelves, or other objects within three feet of the microwave.
Ideally, the microwave will have at least six inches of clearance in the back and sides, and should be mounted to wall studs if possible. It is also important to note that doing so can help to avoid overheating, since microwaves naturally generate heat during operation.
There should also be at least 18 inches of clearance above the appliance. This ensures that the operation of the microwave does not interfere with other kitchen appliances, such as range hoods or exhaust systems.
Lastly, any combustible material should be at least 36 inches away from the microwave. This is an important safety precaution, as microwaves can cause fires if combustible materials are too close.
Can I put a countertop microwave as built in?
Yes, you can put a countertop microwave as built in. However, there are a few things that you need to consider before doing so. Firstly, you’ll need to make sure the microwave fits in the space you have available, paying attention to the dimensions given for the model you select.
Additionally, the countertop microwave will likely need to be vented, either through the wall, ceiling, or cabinet. This will require access to an electrical outlet and possibly some modifications to the walls or cabinets.
You may also need to purchase special mounting brackets to secure the microwave in place. Ultimately, it is possible to create a built-in experience with a countertop microwave, but it may require extra steps and modifications.
Thus, it’s important to carefully consider these factors before installing it.
Does microwave need ventilation?
Yes, microwaves need ventilation. The vent allows heated air and steam to escape so that your kitchen stays cool and dry. It also helps to prevent smoke and unpleasant odors from building up in your kitchen.
Additionally, since the food being cooked may splatter, the vent effectively removes these particles from the area. Without proper ventilation, these particles can build up, causing difficulty when cleaning and potentially an unpleasant odor.
Some microwaves have recirculating vents, which use filters to bring air from the inside of the oven back into your kitchen rather than releasing it outside of the house. For best results, your microwave should be properly vented to the outside to ensure that smoke and odors are vented out of the home.
Are all microwaves a standard size?
No, microwaves are available in a variety of sizes. Depending on the capacity and type of model, the size may vary greatly. Countertop microwaves tend to be the most common sizes which come in small, medium, and larger options.
Over-the-range microwaves are typically smaller than countertop models, though there are some large models that can accommodate larger items. Compact microwaves are small enough to fit on a countertop but are not as powerful as their larger counterparts.
Some manufacturers also manufacture microwaves specifically designed for specific uses such as fish tank heaters or car microwaves. To ensure you choose the right size for your needs it is best to measure the space you have available and consult the product specifications for the individual models.
How do you measure for a replacement microwave?
When measuring for a replacement microwave, it is important to consider several factors. Firstly, you will need to measure the inside of the cavity. This is important to ensure the new microwave fits in the exact space of the old one.
Generally, you should measure the total width, height and depth to find the correct size. Additionally, you should note the location of the mounting bracket in relation to the cavity size, as this may require specific types of microwaves for installation.
Secondly, you will need to measure the opening for the microwave door. This is important to ensure the new microwave door opens and closes properly, as some models may be wider or longer than the previous appliance.
Lastly, you should measure the location of the power outlet and circuit breaker. This is an essential step to make sure the new microwave is safely installed as per local electrical codes. Once these measurements have been taken, you will have the necessary details to purchase the correct replacement microwave.
How do I know the size of my microwave?
To find out the size of your microwave, you’ll need to measure the outside dimensions of the appliance. For the width, measure from the left side to the right side of the microwave, making sure to go from the widest points of each side.
For the height, measure from the top of the microwave to the base, accounting for any feet that might be on the bottom. Finally, measure the depth of the microwave, starting at the front and then going to the back to get the deepest part of the appliance.
Once you have the measurements, you can find the size of your microwave by looking at the manufacturer’s manual or by doing an online search.
How big is a 2.2 cubic foot microwave?
A 2.2 cubic foot microwave is approximately 24″ wide, 19.5″ deep, and 13.25″ high, making it of a medium size. They are usually sized to fit in many standard microwave cubby holes, typically measuring 24″ wide, 15″ tall and/or 16″ deep. The 2.
2 cu ft microwave offers plenty of room to cook a variety of foods and can easily fit a 13″ pizza or a plate of 9″x13″ dishes. Most 2.2 cubic foot microwaves offer power of 900 watts or more, and they come with a variety of features, such as 11 power levels, a digital display, timer, and child lock.