The ECHO CS-400 chainsaw uses a. 325” pitch and a. 050” gauge. The bar sizes available for the CS-400 range from 14” – 20”. The 14” bar requires a 40 drive link chain, while the 16” and 18” bars require a 45 drive link chain.
The 20” bar requires a 50 drive link chain. Therefore, depending on the size of your bar, the ECHO CS-400 chainsaw takes either a 40, 45, or 50 drive link chain.
What chain does ECHO chainsaw use?
ECHO chainsaw models use a variety of chain types depending on the model, such as a. 325 inches,. 375 inches, and. 404 inches. The chain used on ECHO chainsaws is an Oregon brand chain with a semi-chisel cutting link, which is designed specifically for the ECHO chainsaw and comes pre-sharpened for quick and easy cutting.
Oregon chains feature low-kickback, low-vibration performance, providing increased safety while operating the chainsaw. Additionally, they come in both standard and low-profile options, allowing more clearance between the branch and the selection, as well as a choice of guard designs to prevent kickback.
The ECHO chainsaw’s low-kickback chain reduces the chance of the chainsaw suddenly reversing and contacting the operator.
How can I tell the size of my chainsaw chain?
To determine the size of your chainsaw chain, you will need to measure the drive link count of the chain. To do this, measure the distance between drive links on the saw chain–the horizontal bar links in the center of the chain that fit into the drive sprocket of the chain saw.
Once you measure the distance, count the number of drive links to get the drive link count.
The size of the chain is usually indicated by this drive link count. Most saw chain sizes are available in quarter-inch increments. This means that a chain with 16 drive links would be a. 375 inch or 3/8 inch size chain.
A lower drive link count is considered to be a smaller size chain and a higher number is a larger chain.
You may also be able to find the size printed on the chain itself. This can only be done if the chain is still available in a store with the packaging and not already installed on your chainsaw. If you have already installed it, you will need to measure the distance between drive links as described above to get the size.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain is the size of the drive links. 325 chain has 3/8” pitch and drive links that measure. 325” in width at the bottom of the cutter, whereas 3/8” chain has. 404” pitch and drive links that measure.
375” in width at the bottom of the cutter. 325 chain is most commonly used in smaller chainsaws due to its reduced size and weight, whereas 3/8” chain is the most common size used in larger chainsaws. Similarly,.
Similarly,. 325 chain has fewer components compared to 3/8” chain, allowing for easier maintenance and reduced wear and tear. Lastly,. 325 chain also has less cutting capacity than 3/8” chain.
What size file do you use on a 3/8 chain?
The size file that you should use on a 3/8 chain will typically depend on the type of chain you have. Generally speaking, a 3/8 chain usually requires a 5/32 size file. The 5/32 size file provides the perfect fit for the 3/8 chain, as it’s small enough to get into the grooves of the chain yet is still wide enough to provide enough space for filing down the chain links.
If you have a full-chisel chain, however, you may need to use a 7/32 size file. It is important to be aware of the type of chain you are dealing with, as different chains require different sizes of files for optimal performance.
Additionally, you should also check your owner’s manual for specific instructions on what size file to use.
How do you measure chain length?
Chain length can be measured by counting the number of rivets between the ends and then determining the distance between each of the rivets. For example, if you have a 15-link chain, measuring the distance between each rivet will tell you the total length of the chain.
However, when measuring a longer chain, it is usually easier and more accurate to take the total length of the chain and subtract the combined lengths of the rivets – essentially deducting the thickness of the material used to join the links.
This method offers a more accurate measurement, especially when dealing with narrow chains where the distance between the rivets may be smaller. Additionally, the measured length of chain can also be used to calculate chain pitch, a measure of the distance between the chain’s rollers (or pins).
How do I know what size chain is on my Stihl chainsaw?
To know what size chain is on your Stihl chainsaw, you need to look at the model number on the chain cover and ensure that the chain you buy is both the same size and the same pitch. The model number of the chain that’s currently on your Stihl chainsaw can be found in two places: either on the side of the chain’s bar or on the label found on the back of the chain.
Finding the pitch of the chain is easier than determining its size. The chainsaw chain pitch will be indicated by a number followed by a lowercase “p”. If the chain pitch is 3/8 for example, the number will be.
375 followed by a “p. ” For example “. 375p” or “. 404p. ”.
Once you’ve identified the pitch of the chain, the next step is to determine the size. Common chain sizes are 1/4 inch,. 325 inches, 3/8 inches,. 404 inches,. 050 inches, and. 063 inches, with. 325 inch being the most common for a residential chainsaw.
Remember, it’s important to buy the same pitch and size combination for your Stihl chainsaw, so that the replacement chain fits properly and works effectively.
Does Stihl chain fit ECHO?
No, Stihl chains are not compatible with ECHO equipment. This is due to the fact that Stihl and ECHO use different lengths of drive links, pitch, and gauge on their chains. In addition, the components of Stihl chains, such as the guide bar, the sprocket drive, and the drive link shape, are not compatible with those of ECHO chains.
For these reasons, Stihl chains will not fit on ECHO equipment, and vice versa.
Will an Oregon chain fit an Echo chainsaw?
In most cases, an Oregon chain should fit an Echo chainsaw, though this will depend on the specific make and model of both the chain and the chainsaw. It is important to double check the measurements before buying a new chain, as the pitch, gauge and number of drive links may vary between chains and chainsaws, and may not be compatible.
It is also important to pay attention to any safety instructions regarding the correct type of chain and make sure that the chain meets all safety requirements before fitting.
Will Husqvarna chain fit echo?
The short answer is yes, but it will depend on the type of chainsaw. Husqvarna chains are compatible with most Echo chainsaw models, but only certain ones. Generally, the Husqvarna chains will fit Echo chainsaws that have 3/8″ or.
325″ pitch, narrow kerf and a built-in chain tensioner. If you check the manual of your particular Husqvarna and Echo chainsaw models, you can ensure a correct fit. Additionally, you’ll need to make sure the chain length and gauge are compatible with both models.
It’s always best to double check before using a different brand of chainsaw chain on an Echo model to make sure it will fit properly.
Does Stihl own echo?
No, Stihl does not own Echo. Stihl and Echo are both prominent companies in the manufacture and distribution of outdoor power tools, though they are not affiliated with each other. Stihl is a German-based company that was established in 1926 and is the world’s largest selling brand of gasoline-powered handheld outdoor power equipment.
The Echo company was established in Northbrook, Illinois in 1972 and focuses on a variety of two-stroke engines and other power tools. Both Echo and Stihl offer products for commercial and residential users, including chainsaws, trimmers, blowers, edgers, and other parts and accessories.
While Stihl and Echo do not have any direct ownership connections, they do both compete in the same market.
Whats better Stihl or echo?
Ultimately, it depends on what you’re looking for in a chainsaw. Both Stihl and Echo are leading brands when it comes to power tools and they both offer a variety of models at different levels of quality and price.
Generally, Stihl has the advantage when it comes to ruggedness and power. Its products are heavier but they are designed to be durable and to stand up to tough use in extreme conditions. Meanwhile, Echo offers lighter weight and quieter models that may be better suited for occasional residential use.
However, Stihl chainsaws tend to be more expensive than Echo models of the same size and features.
When deciding between Stihl and Echo, it’s important to consider your specific needs and budget. If you’re looking for a high-powered machine for frequent, heavy-duty work, Stihl is a great option. If budget is more important, Echo might be a better choice.
Ultimately, both brands offer quality products that can get the job done.
Who makes ECHO products?
Echo products are designed and manufactured by Amazon, Inc. Founded in Seattle in 1994, Amazon is one of the world’s largest e-commerce companies and offers a variety of products and services, including Echo products.
Echo products are designed to make life easier and more convenient, from Amazon’s very own Alexa voice assistant to Echo-enabled speakers, and more. Amazon releases new Echo products regularly, and is constantly innovating to develop new features and capabilities.
Echo products are available online and through retailers around the world.
What’s the biggest chainsaw Echo makes?
Echo manufactures a variety of chainsaws to meet different needs and preferences. Their largest model is the Echo CS-8000, which is an 8-horsepower chainsaw with a 20” Oregon bar and chain. It’s specifically designed for the most demanding of jobs, offering maximum power and application versatility.
It has an air-injected two-stroke engine and anti-vibration handle for comfortable operation. The Echo CS-8000 also features a heavy-duty metal sprocket, automatic oiler, and full-wrap handle for improved control.
With a weight of only 17.3lbs, this chainsaw is easy to maneuver when tackling the toughest of jobs.