The size of the chain on a Dewalt chainsaw can vary depending on the model, but most Dewalt chainsaws are equipped with a low-kickback 16-inch replacement chainsaw chain that features a 3/8” pitch, 0.
050” gauge, and 56 drive links. The chain’s reduced kickback design is approved for use with all saws that meet the following specifications: 25.4 mm (1″) bar, 1.3mm pitch, 8 teeth sprocket. Additionally, the series of replacement chains from Dewalt come with a pre-sharpen chisel tooth on each chain and a sequence of ramped chisel teeth.
The replacement chains are all also equipped with a full chisel cutter that provides a smooth and easy cut when used in combination with the low-kickback design.
How do I know what size file to use to sharpen my chainsaw?
It is very important to use the correct file size for sharpening your chainsaw in order to ensure the best performance and safety. To know what size file to use, you need to find the information on the chainsaw’s guide plate (often located on the bottom of the chainsaw’s bar).
The guide plate will indicate the pitch and gauge of the chain and from this information, you can determine the ideal file size for sharpening.
Most guide plates indicate two numbers, such as 1/4 or. 325. The first number is known as the pitch, which is the distance between a given link of the chain and the one next to it. The second number is the gauge, which is the width of the drive link that fits into the bar of the chainsaw.
The gauge can also be measured with a ruler.
Once you know the pitch and gauge of the chain, you can easily determine the correct file size to use. Generally, chainsaw chains with a pitch of 1/4 require a 3/16 inch file, while chains with a. 325 pitch require a 7/32 inch file.
It is also important to remember to match the file size with the size of the cutters on your chain. If the file size is too large, it will result in over-sharpening, which can cause the chain to become brittle and break prematurely.
On the other hand, if the file size is too small, the chain may not be sharpened evenly and effectively.
For best results, it is always recommended to check your chainsaw’s manual before sharpening the chain. Doing so will ensure that you use the correct file size and sharpen your chain correctly and safely.
How do you sharpen a Dewalt chainsaw chain?
Sharpening a Dewalt chainsaw chain is a relatively simple process. First, make sure you have the correct file size for your chain – this is usually 3/16 of an inch for a 14-inch chainsaw chain. It’s also a good idea to wear safety gloves and safety glasses to protect yourself from potential injury.
Begin by positioning your chainsaw on a level surface, with the chain side facing up. Place a depth gauge guide against the lower blade of the chainsaw and ensure that it is touching the body of the saw.
This will help to maintain an even depth when you file the chain.
Take your file and make sure that it is properly lubricated with an oil-based solution. Grasp the file firmly, pushing it away from you in a slightly downward angle. Follow the angle of the cutter teeth, filing away from the chain.
Make sure to continue applying oil on the teeth of the chain and the file throughout the process.
After filing each tooth, rotate the chain and file the next one. Make sure that the angles are even and consistent on each tooth. If the angles are not being maintained properly, the chain may not be able to cut as effectively.
Once you have filed each tooth, check the sharpness of the chain by use of a blunt nail. If the chain is sharp, the nail should scrape the surface of each tooth.
When you have completed sharpening the chain, rotate it until the depth gauge guide is touching the ground. This will ensure that all cutters have an even depth and that the chain can perform at maximum efficiency.
Once you have finished sharpening the chain and re-positioned the depth gauge guide, you can spray the chain with a lubricant and re-position it on your saw.
Taking the time to sharpen your Dewalt chainsaw chain properly can help ensure that your saw is running efficiently and safely, without fail.
Will DeWalt 60V Chainsaw run on 20V battery?
No, a DeWalt 60V chainsaw will not run on a 20V battery. This is because the chainsaw uses 60V of power, and a 20V battery can only provide 20V of power. The DeWalt 60V chainsaw utilizes two 6 Ah lithium-ion battery packs to power its chain, meaning two 60V batteries are required for it to run.
This is because the chainsaw needs the extra power and amperage to safely run and cut through tough materials. Also, the nature of a chainsaw puts extra strain on the battery, so a 20V battery may not even be able to manage the load.
As an additional safety measure, DeWalt has designed the chainsaw so that it won’t run without the two batteries installed, providing an extra layer of protection against overloading the battery pack.
Can you use 60V DeWalt battery on 20V tool?
No, you cannot use a 60V DeWalt battery on a 20V tool. DeWalt batteries are designed for the voltage of the tool it is used with. Using an incorrect voltage battery can potentially cause damage to your tool or harm to the user.
In some cases, a higher voltage battery can actually cause the tool to work harder than it is designed for and overheat, possibly leading to other issues or failure of the tool. Additionally, a higher voltage battery may not provide the same performance as a lower voltage battery.
For optimal performance, it is important to use the recommended battery voltage for the tool you have purchased.
How do I stop my DeWalt chainsaw from leaking oil?
If your DeWalt chainsaw is leaking oil, the best way to stop it is to first identify where the oil is leaking from and determine the root cause. The most likely causes of an oil leak include a clogged or damaged oil filter, a worn, cracked, or loose oil seal, or a loose or broken oil line.
First, check the oil filter for clogs. If the oil filter is clogged, then replace it with a new one. Next, inspect the oil seal for any cracks, wear, or looseness. If the oil seal is cracked or worn, then it should be replaced.
If the oil seal is only loose, then it should be tightened. Finally, check for any loose or broken oil lines and replace them, if necessary.
Once you have identified and addressed the source of the oil leak, you can start the chainsaw up and check that the oil is no longer leaking. If it is, then you may need to repeat the steps above.
Where are DeWalt products made?
DeWalt is an American brand of power tools, hand tools, and accessories owned by Stanley Black & Decker. While the company is based in Towson, Maryland, its products are manufactured around the world in countries such as the United States, Mexico, Brazil, Poland, Croatia, and China.
The advanced manufacturing technology used by DeWalt enables them to produce high-grade, reliable power tools that meet the expectations of professional contractors. The main assembly plants for the DeWalt power tools are located in Charlotte and Greenwood, South Carolina; Chester, Virginia; Mexicali, Mexico; and Suzhou, China.
The premium hand tools are produced in Jacksonville, Alabama, while accessories and most cordless tools are produced in Suzhou. Other components and smaller tools, such as hammers and chisels, are produced in plants in other countries throughout Europe.
What size saw file do I need?
The size of the saw file you need will depend on the type of saw blade you are filing. If you have a hand saw, for instance, the file size you should use will likely be around 10 inches. Chainsaw blades, on the other hand, may require a larger 14-inch file.
In either case, it’s important to select a file that is the same size or slightly larger than the blade width in order to ensure an effective cut. If you’re not sure what file size to choose, simply measure the width of the saw blade and select a matching or slightly larger size file.
With a few exceptions, most saw files are available and labeled by size.
How can I tell the size of my chainsaw chain?
If you need to determine the size of your chainsaw chain, there are a few different things you can do. First, look at the number of drive links in the chain. Drive links are the metal loops that connect the cutters on the chain.
The number of drive links will give you an indication of the size of the chain.
Next, take a look at the size of the pitch. Pitch is the distance between three consecutive rivets divided by two. Most chainsaw pitches range from 0.325” to 0.404”. Most of the pitch sizes correspond to a specific chain size, with the pitch size being a major factor in the size of the chain.
Finally, you can measure the gauge of the chain. Gauge is the thickness of the drive link where it fits into the nose or guide bar groove. The gauge is usually printed on the side of the drive link. Use a set of calipers to measure the gauge.
The gauge is another factor that will help you determine the size of the chain.
By looking at the number of drive links, the pitch size, and the gauge, you should be able to easily determine the size of your chainsaw chain.
What size file do I need for a Stihl .325 chain?
The Stihl. 325 chain typically uses a 3/8″-pitch or. 404″-pitch chain. When selecting a chain for your specific saw, you will need to know whether or not your model uses a 3/8″-pitch or. 404″-pitch chain.
Once you’ve determined the type of chain your saw needs, you can then select the correct size file.
The size file you need will depend on how many drive links (teeth) your Stihl .325 chain has. The 3/8″-pitch chain will require a 5/32-inch file, while the .404″-pitch chain needs a 7/32-inch file.
Most chains will have a number printed on the side with the letters ‘P’ or ‘C’. The letter ‘P’ stands for ‘Pitch’, and the number next to it will determine whether the chain you have has a 3/8″-pitch or.404″-pitch.
The letter ‘C’ stands for ‘Cutters’, and it is the number listed next to that which will tell you the amount of drive links (teeth) the chain has. You can then use this information to determine the correct size file for your purpose.
It is important to use the correct size file in order to properly sharpen your Stihl. 325 chain. Using the incorrect size file can result in a poor cut and/or can even damage the chain. Selecting the correct size file is essential to ensure that you get the maximum life out of your chain.
How long does a chainsaw file last?
The length of time a chainsaw file will last is largely dependent on the use it receives, as well as how well it is cared for. With frequent use, a chainsaw file will likely need to be replaced after a few months.
When regularly sharpened, however, and with careful use, a chainsaw file can remain in effective and safe use for much longer. It is recommended that a chainsaw file should be inspected for signs of damage and wear at least every three months to ensure that it continues to operate in the safest and most effective manner possible.
What is the difference between .325 and 3/8 chain?
The. 325 chain and the 3/8 chain both refer to the same size – 3/8 inch. The. 325 size is the most popular and commonly used size of chain for saw chains, as it is made for a variety of chainsaw models and brands.
The difference between the two is simply the way the size is expressed. 325 is expressed in decimal notation, while 3/8 is expressed in fractional notation. Both terms refer to the same size, but some brands may prefer one over the other due to the way they are accustomed to seeing it expressed.
Can a pole saw be used as a chainsaw?
No, a pole saw cannot be used as a chainsaw. While a pole saw is similar to a chainsaw, the primary function of a pole saw is to prune and trim trees and large, dense shrubbery. It consists of a small gasoline engine with a long pole that usually has an 8 to 10 inch, curved saw blade attached to the end.
A pole saw is an easier and more comfortable way to prune and trim trees than a ladder. On the other hand, a chainsaw is designed specifically to cut through larger diameter logs, firewood and other timber.
A chainsaw typically has a bar length of 16 inches, whereas a pole saw usually has a much shorter bar (if it has one at all). Chainsaws have a more powerful engine than a pole saw and have an additional blade guard and chain brake safety features.
Therefore, while a pole saw can prune and trim branches, it cannot be used as a chainsaw.
How do you put a chain on a pole saw?
Putting a chain on a pole saw is a relatively easy task that can be completed in just a few steps.
First, make sure the chain is the right size for your pole saw. If you need to replace the chain, the size of your saw should be listed either on the manual or body of the saw. Tighten the bar nuts to secure the chain.
Next, put the saw on a flat surface and turn it upside down. Open the clutch side cover and remove the bar and chain. Align the drive links with the slot on the bar and push the chain through the bar.
The drive links should fit into the sprockets on either side of the bar. Once the chain is on the bar, make sure the drive links are properly aligned with the sprockets. If they are not, the chain may come off and cause serious damage.
Finally, close the clutch side cover and rotate the bar back and forth. This will help the bar and chain adjust properly. Test the saw to make sure it is running smoothly before using it.
With these steps, you should now know how to properly put a chain on a pole saw.
