Long curtains typically come in standard lengths that include extra long curtains. Standard lengths generally include 63, 84, 95, 108, and 120 inches. However, depending on the retailer, you may also find curtains that are available in lengths up to 192 inches or longer.
How wide should curtains be for 120 inch window?
The ideal width for curtains for a 120 inch window is twice the width of the window. This means that a 120 inch window requires curtains that are 240 inches wide. However, if you want the curtains to open and close at the center of the window, you should use curtains that are three times the width of the window, or 360 inches wide.
In this case, the width of the fabric would be 120 inches per panel. For a more dramatic look, you can try four times the width of the window, or 480 inches of fabric per panel. If you only have a 120 inch window, but want to create more of a curtain look, you can use panels that are significantly smaller than the window width.
For instance, you could use 48 inch panels, but hang them from panels that are 140 inches wide hung from the ceiling so that the curtains look full and luxurious even when opened.
What is the standard size of bedroom curtains?
The standard size of bedroom curtains typically depends on the size and height of the window they are covering. Generally, the most common size of bedroom curtains are 45″-54″ wide by 54″-84″ long. For wider windows, you may want to look for curtains that are 72″-108” wide.
When measuring the length, the curtains will usually hang a few inches above the windowsill, so it’s best to measure from the curtain rod to just below the windowsill. To achieve a floor to ceiling look, you can purchase extra long curtains that can measure 84″-108″ long, or even longer depending on your window size.
What is the rule of thumb for hanging curtains?
When hanging curtains, the rule of thumb is to follow the “foolproof formula”: measure the window width, multiply that number by 2, then add about 12 inches for your final rod length. This formula will usually ensure that the curtains hang at least a few inches on either side of the window, and that the curtains are wide enough to cover the entire window when they are hung.
The height of the rod depends largely on personal preference. When hanging the rod, make sure to hang it four to six inches above the top of the window. This will give the curtains enough height to gather and “puddle” on the floor or to reach the window sill, creating a more finished and tailored look.
When placing the rod hangers, try to avoid installing them directly in the corners of the window, as that can make the curtains look too flat or forced. It is also important to take into consideration the existing decor in the space.
If the room has other furniture pieces or artwork, the curtains should be hung a few inches higher than those elements so that they don’t look crowded or cluttered.
Should curtains touch the floor or window sill?
It depends on the preference of the homeowner or renter. Some prefer their curtains to touch the floor while others prefer them to end at the window sill.
The main advantage of curtains that touch the floor is that they can create a finished look and add a sense of elegance to the room. It is especially crucial if the curtains are an important factor in home décor, such as in a formal lounge or dining area.
For someone who likes a more modern look, curtains that end at the window sill may better suit the room.
When it comes to maintenance, curtains that touch the floor can be more difficult to clean and care for. They pick up dust more easily and can be more difficult to keep in a crisp and neat condition.
Curtains that end at the window sill are easier to dust, vacuum and keep tidy, as gathering dust will not be such a problem.
In conclusion, the decision to have curtains that touch the floor or end at the window sill depends on individual preference and/or necessity. If the function and design of the room calls for a more formal look, then curtain length might be advisable.
On the other hand, if your priority is ease of maintenance, then curtains that end at the window sill might make more sense.
Do curtains have to touch the floor?
No, curtains do not have to touch the floor. In fact, they should typically be just long enough to just brush the top of the flooring. This will ensure that they are the right length and create the right aesthetic.
There are some cases where the curtains should be longer and fully cover the floor. For instance, if you have highly patterned curtains, then you should consider having them cover the floor to ensure a more unified look.
However, typically, curtains can skim the top of the floor and still create a pleasant and even look.
How can I make my curtains look expensive?
First, look for high-quality fabrics. Natural fabrics like silk, linen, and velvet are amongst the most luxurious options and will give your curtains an elegant look. If you don’t want to or can’t spend the extra money on a natural fabric, there are great polyester and synthetic options that provide a luxurious luster.
When picking out a pattern for your curtains, try to use classic designs that won’t go out of style easily. Embroidery and lace accents can also bring a very expensive feel to curtains.
Another way to make your curtains look more expensive is to choose heavier fabrics to better filter sunlight and block noise. Heavier fabrics have a more substantial feel that lend to a luxe look. You can also add texture to your curtains by using bubble designs or pleated stitches for the edges.
Finally, accessories like decorative finials and beaded tie backs can help complete the luxurious look. Match the metals and colors of the finials and tie backs to the pattern and colors of your curtains to create a uniformed look.
Do curtains make a room look bigger or smaller?
The effect of curtains on the overall look of a room often depends on the type and size of curtains being used. Generally speaking, lighter, airier curtains with longer drapes will make a room appear larger.
This is because they enhance the height of the ceiling and bring light into the room. Conversely, thicker, heavier fabrics with short curtains will draw attention to the windows and make the overall space look smaller.
It’s also important to consider the amount of fabric being used. Too much fabric can overwhelm a small room, while not enough can make the room look even smaller. Additionally, curtains in bright, bold colors can be visually overwhelming and make a room appear smaller.
If you opt for more vibrant hues, consider using sheer fabrics that can help balance the impact of the vibrant hue by bringing in natural light.
In addition to choosing the right style and size for your curtains, the placement can also have an effect on the look of the room. Adjustable pale silk curtains are a good option for limiting excessive light when needed and allowing the light to flow into the room when opened.
Finally, curtains that hang at least 6 inches above the window, and 1.5 inches above the window frame will create an air of openness, while those that are too short will make the room look even smaller.
Is it width by length for curtains?
Yes, when buying curtains, generally you will need to know the width and length of your window so you can find curtains that will fit. It is important to measure the width of the window before making a purchase because different manufacturers may vary in size.
Additionally, if you’re measuring for blackout curtains, it is important to measure from the top of the window to the sill for the length. When measuring for the width, take three different measurements for the left, center, and right part of the window, and use the longest one for a nice full look.
What is the way to measure for curtains?
Measuring for curtains is an important part of making sure that your windows are fitted correctly for the best look and optimum insulation. Here are the steps for accurately measuring for curtains:
1. Measure the width of your window from trim to trim so you can determine the size of your curtains
2. Figure out how wide you want your curtains to be. If they’re too narrow, they won’t cover the window and too wide, they will look bulky and unappealing.
3. Measure the height of your window from the top of the trim to where you want the curtains to finish. If your curtains will go to the floor, make sure to measure the distance from the top of the trim to the floor.
4. Determine how long you want your curtains to be. Some options are to hang them just below the window frame, mid-way down the window frame, or all the way to the floor.
5. To make sure your curtains are wide enough to overlap, remember to add about 4 or 5 inches to the width measurement.
6. Double check your measurements to make sure they’re accurate before you place your order.
Following these steps will ensure that your curtains fit perfectly and you can get the look and insulation you desire.
What size curtains do I need for a 36 inch window?
When shopping for curtains for a 36 inch window, you need to make sure you purchase the correct size. Generally, curtains should be 2 to 3 times the width of the window so for a 36 inch window, you should be looking for curtains that are 72 to 108 inches wide.
To find the correct finished length for your curtains, measure from the top of the window down to the floor in the area you plan to hang the curtains. Most curtains are designed to hang 4 to 6 inches below the window frame so add 6 inches to the length measurement for a natural look.
If you are looking for a more formal look, you can hang them just above the window frame. However, if you don’t want to hang curtains all the way to the floor, you can hang them a bit higher. In this case, measure from the top of the window down to where you want the curtains to hang and subtract 1 to 2 inches to find the finished length of the curtains.
Once you have both the width and length of the curtains, you’re ready to shop!.
How much wider Do curtains need to be than the window?
Curtains should be at least twice as wide as the window they are covering. If you want more fullness and more dramatic curtains, then you can go up to three or even four times the width of the window.
When hanging curtains, try to hang them right at the top of the window frame if you have custom rods or curtains hardware; this will make the curtains hang with more depth and fullness. If you have a wide window, make sure to use wide curtains to cover it.
If you need a drape to cover the full width of the window, you should use a length of fabric that is at least three or four times the width of the window.
How do you choose curtain panel size?
When choosing curtain panel sizes, the size of your window is the most important factor to consider. Generally, the panels should reach at least an inch or two beyond the width of the windows and be long enough to just brush the floor or even drape on it.
For a more formal look, the panels should reach two to four inches beyond the window. If you plan to hang the curtains from a rod or add a valance, ensure that the measurement to the floor is at least three inches greater than the window.
Additionally, when measuring for the length, keep in mind if you will be using a rod near the ceiling or a decorative trim on the bottom. Finally, when hanging the panels in the windows, remember to leave an inch or two of extra space between the sides of the window and the panels.
How do curtain measurements work?
Curtain measurements typically involve measuring the width and length of a window or other area that requires a curtain. For window-style curtains, you’ll need to measure the entire window space and determine how much extra fabric you need to cover it.
For example, if a window is 24” wide and 60” long, the curtain should be at least 48” wide and 84” long. This allows the sides of the window to be covered and adds enough extra material for proper fullness.
Curtain length should also be taken into account when measuring. The standard length of regular curtains ranges from 63” to 144” and they should be made at least 1.5 times the width of the window. Room-darkening and blackout curtains are usually the longest and can extend up to 110”.
Accessories like tie-backs, rings and curtain rods should be taken into account as well. Tie-backs and rings generally add up to 4” to the width of the curtain, while a curtain rod can add a few extra inches as well depending on its placement.
To be safe, it’s best to take these accessories into account when measuring to ensure that the curtains fit correctly.
What curtain width is 168?
The curtain width of 168 inches would be equivalent to 14 feet. Depending on the manufacturer, curtains may have size categories such as ‘small,’ ‘medium’ or ‘large’ that may correspond to different sizes.
It is best to check with the manufacturer to verify the size of the curtains. In addition, curtains may also come in different panel widths. A single panel typically ranges from 35 to 45 inches for a single window, but for large windows, it is best to buy two panels each measuring approximately 84 to 90 inches.
How much wider than the window should blackout curtains be?
The width of blackout curtains should be at least two times wider than the width of the window. It is best to measure the actual window width, and then look for blackout curtains that are twice that size or wider.
This will ensure that the curtains will hang properly and provide total coverage when closed. For example, for a window that is 30 inches wide, you should look for blackout curtains that are at least 60 inches wide or wider.
How do I increase the width of my curtains?
The most common and easiest method is to add a header tape. Header tapes are wide pieces of fabric that come in a variety of colors, textures, and widths. They attach to the top of your curtain panel, adding extra depth and width to the top of your panel.
The header tape should match the fabric used in the curtain panel, and you can purchase the width that you need to create the desired look.
Another way to increase the width of the curtains is to add a second panel. You can buy panels from the same fabric as your existing panels, or purchase different colors, textures, or designs to mix and match.
Adding an extra panel or two to the sides of your existing curtains can make a tremendous difference in the overall look and feel of the curtains.
Finally, you can consider using drapery liners to increase the thickness of your curtains. Drapery liners come in a variety of fabrics and colors, and they attach directly to the backside of your curtains.
The thickness of the liners will create a luxurious look and feel, while adding extra insulation value to the window.
Regardless of the method used, increasing the width of your curtains is a great way to give more depth and texture to a room. With a few simple steps and the right pieces, you can create a custom look that adds character and warmth to your space.