The correct size file for a 3/8 chainsaw chain is a round file that has a diameter of 5/32 of an inch. It is important to use the appropriate size file to keep the chain sharp and in good condition. The number of teeth on the chain will determine how many times the file needs to be passed over each link to maintain the cutter’s profile.
When filing a 3/8 chain, the guides in the filing vise need to match the size of the chain and you should always use the depth gauge tool for ensuring the correct depth of the cutters. It is important to not over-sharpen the chain and to keep the angles of the cutter the same to ensure a proper cutting surface.
What file do I need to sharpen my chainsaw?
To sharpen your chainsaw, you’ll need a chainsaw file. This is a cylindrical or semi-cylindrical metal file designed specifically for sharpening a chainsaw chain. It usually has 3/16 inch diameter and one side is usually single-cut while the other side is double-cut.
The double-cut side is used for sharpening the teeth of the chainsaw chain while the single-cut side is used for honing and polishing the chainsaw teeth.
To sharpen your chainsaw correctly, you’ll need to start by setting the correct filing angle. The correct angle will depend on the type of chain you have, but typically it should be between 25 and 30 degrees.
Once your chain is set at the proper angle, move the file from one side to the other and back, paying careful attention to the angle as you work. As you move the file, you should only apply enough pressure to ensure the file is in contact with the chainsaw teeth.
Additionally, you should move the file in an alternating pattern in order to ensure the chainsaw teeth are sharpened evenly.
It’s important to remember that chainsaw files are designed for single-use and should be replaced after each sharpening. Additionally, you should always wear eye protection when sharpening a chainsaw and be sure to clean the area thoroughly after to ensure no debris is left behind.
What size file do I need for a Stihl .325 chain?
The correct size file to use for a Stihl. 325 chain is 5/32-inch. This is the standard size for all Stihl chainsaw chains, which are designed to use the same file size. The 5/32-inch file is also the correct size to use for other brands of chainsaw chains with a.
325 pitch, such as Oregon and Carlton. When sharpening the chain with a file, you will also need a depth gauge to ensure that the cutters are correctly set. This is an important part of chain maintenance as it helps to maintain the optimal cutting performance of the chain.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain lies in the size of the drive link – the component of the chain that connects the two components of the chain saw itself. The. 325 chain drive link is what’s known as a standard size, and is found on most modern gas-powered chainsaws.
It measures 0.058 inches in diameter and is suitable for small to medium sized trees, as well as larger logs. By contrast, the 3/8 chain drive link is a larger size, measuring 0.050 inches in diameter.
It is typically found on larger, more powerful chainsaws and is best suited for tackling large trees, as well as heavier logs. As a result, the. 325 chain is more suited for everyday tasks, while the 3/8 chain is meant for more demanding tasks that require more power and durability.
What pitch is a .325 chainsaw chain?
A. 325 chainsaw chain is a type of chainsaw chain usually sold in a standard 3/8″ pitch, but other common pitches are 1/4″ and 3/8″ low profile. A pitch is the size of the drive link, which is the part of the chain that fits into the guide bar and connects the segments, or “cutters”. The.
325 pitch is the same size as 3/8″ but the individual cutters are smaller, meaning it requires fewer drive links to move it around the bar. The result is less drag, less wear and tear on the engine, and a smoother, more efficient cutting experience.
How do you sharpen a .325 chainsaw chain?
Sharpening a. 325 chainsaw chain can be a bit challenging and requires a specific type of sharpening tool. First, the chain must be removed from the saw. Place the chain on a flat surface and check the depth gauges on all the blades for accuracy.
It is important to make sure the depth gauges are set to the manufacturer-recommended setting. With the depth gauges checked, the chain can then be sharpened.
To sharpen the chain, you will need a round file of the same size as the chain’s pitch. This is typically a 5/32″ round file for a. 325 pitch chain. The file should be handled with your dominant hand, while the free hand should be used to hold the chain.
The file should be drawn across the cutting edge of each chain tooth. During sharpening, the chain should be held such that the pitch is facing away from you. After each stroke, the chain should be rotated so the file can contact the entire cutting edge of each chain tooth.
Once all of the cutting edges have been sharpened, check the depth gauges again to make sure they have not been changed from the manufacturer-recommended setting. Finally, the chain should be reinstalled onto the saw and tested for accurate operation.
Can I use an Oregon bar on a STIHL chainsaw?
Yes, you certainly can use an Oregon bar on a STIHL chainsaw. Oregon bars come in various sizes, so make sure you get the one that fits your particular STIHL saw. Oregon bars are specially designed for professional chainsaw users.
They are made from quality materials and feature high-quality manufacturing for long-lasting performance. Oregon bars also come with a warranty, so you can be sure that your bar is built to last. Additionally, Oregon bars are designed to offer precision and stability when cutting, allowing you to achieve clean, precise cuts without wasting time or effort.
With an Oregon bar on your STIHL chainsaw, you should have everything you need to make your job easier and more efficient.
What size chain do I need for a STIHL ms180c?
The size of the chain you will need for the STIHL MS180C chain saw will depend on the model you have and the bar length. Generally, you will need a 3/8 inch chain, with a depth gauge of. 050 inch, and a drive link count of 57.
If you are unsure of the size of chain you need, it is best to consult the manual that came with your saw and review the specifications listed. Additionally, you can contact a local STIHL dealer to obtain the right chain for your saw.
How many Sharpenings is a chainsaw file good for?
This depends on a variety of factors such as how often the chainsaw is used and how often it is sharpened, as well as the size of the file being used. Generally speaking, a chainsaw file should last anywhere from 10-20 sharpenings.
However, depending on the level of wear caused by regular use, the file may need to be replaced sooner. It is important to check the condition of the file often, as you do not want to cause any damage to your chainsaw’s teeth.
If the file begins to show signs of wear, such as a chipped cutting edge, it is time to replace it.
What is the most common chainsaw file?
The most common chainsaw file is a round file. These versatile, round files are designed to sharpen both the top and bottom sides of the chain tooth’s cutter, making them an invaluable tool for chainsaw sharpening.
When used with a chainsaw filing guide, they can ensure a precise and accurate grind. They are available in different diameters, lengths and shapes to fit different chainsaws and can be used on both cross-cut and ripping saws.
Because of their versatility and low cost, round files are the most commonly used type of chainsaw file.
How often should you sharpen chainsaw blade?
Sharpening the chain on a chainsaw should be done as often as necessary based on how much you have been using it. Generally, sharpening the chain after every five to ten hours of use is recommended. When the chain begins to lose its sharpness, you will know because it will not be cutting as easily and efficiently as it usually does.
Additionally, be sure to inspect the chain for any visible signs of damage or wear, such as deformed/bent cutters, broken edges, cracked teeth, etc. Once the chain is sharpened, it is recommended to oil the blade so that it remains sharp longer and to protect the saw from any rust or corrosion that may occur.
Will a Oregon chain fit a Stihl?
No, a Oregon chain will not fit a Stihl saw. Oregon and Stihl chains use different parts and components, which means that they cannot be interchanged with one another. Oregon chains use a different drive link, cutter, depth gauge and guide bar compared to Stihl, meaning that they are not compatible.
For the best and safest performance of your chainsaw, you should use the chain specifically designed and manufactured for that particular saw by the manufacturer.
What does the gauge mean on a chainsaw chain?
The gauge on a chainsaw chain refers to how thick the drive links are. The drive links are the part of the chain that fit into the sprocket, and the gauge measures the width of these links. Different chainsaws are designed for different size drive links to fit the corresponding sprocket that is used with the chainsaw.
The gauge is typically expressed in 1/100th of an inch, such as 0.05 inch (1/20th inch), 0.06 inch (1/16th inch) and so on. Generally, the thicker the drive link, the more tension is generated when it is in the sprocket.
This generates more power and torque to drive the saw chain, which allows it to cut through tougher materials. Having the incorrect gauge on the chainsaw chain can cause issues, such as poor cutting performance, premature chain wear, and even shaking or vibrating of the chainsaw.
Therefore, it is important to ensure that the gauge of the chainsaw chain is the right size for your saw.
How many times can you file a chainsaw chain?
The answer to this question depends upon several factors and can vary based upon how you use your chainsaw. Generally speaking, a chainsaw chain can be filed between 5 and 15 times before it needs to be replaced.
This range is dependent on several things, such as the type of wood being cut, the condition of the chain and the sharpness of the teeth. In addition, a chainsaw’s user manual should offer more details about the expected lifespan of the chain.
If you are constantly cutting hardwoods, such as oak or maple, it is likely that the chain will need to be replaced more frequently than if you are only occasionally cutting softwoods such as pine or cedar.
With proper care and maintenance, your chainsaw chain can have a longer lifespan than what is suggested in the user manual. However, it’s important to be sure that you are following all safety instructions and maintaining your saw, chains and blades properly in order to ensure the best performance and largest lifespan of your chainsaw equipment.
How do I know if my chainsaw chain is sharp?
To determine if your chainsaw chain is sharp, there are a few factors to look for. Firstly, you should inspect the chain when it is in motion and look for chips, dents, and other signs of wear or damage.
If the chain appears to be in good shape, then check the sharpness of the cutting teeth. To do this, run your finger along the length of the chain while it is running to feel the sharpness of the cutting teeth.
If the chain feels dull and blunt, then it likely needs to be sharpened. Additionally, another way to check sharpness is to cut through a piece of a light-colored softwood with the saw and inspect the cut.
If your chain is sharp, the cut should be relatively smooth and consistent, without any jagged edges. If the cut is rough and uneven, then it is likely time to sharpen your chainsaw chain.