When sharpening the 325 chain, it is important to select the correct file size to get the best results. The appropriate file size for a 325 chain is 5/32-inch (4.0 mm), which is most commonly called a 4.
0 mm (5/32-inch) file. This size is large enough to quickly take out small burrs on the teeth of the chain and also small enough to not leave marks in larger and harder components. Additionally, this size allows for even sharpening of all the teeth, resulting in an evenly sharpened chain.
When sharpening your 325 chain, be sure to match the degree angle of the chain’s original shape without any cross filing. This ensures that your 325 chain has an even cutting surface and is less likely to cause kickback.
Additionally, take caution when file filing as it is easy to overfile the side plates, leading to a weakened chain.
What pitch is a .325 chainsaw chain?
The pitch of a. 325 chainsaw chain refers to the size of its drive link. A drive link is the part of a chainsaw chain that connects each cutter to the chain itself. The number after the decimal point (the “.
325”) identifies the drive link size of a given chainsaw chain, and is typically expressed in inches. So in the case of a. 325 chainsaw chain, the drive link size is 0.325”.
Generally speaking, the more powerful the chainsaw, the larger the drive link size, as chains with larger drive links enable more efficient power transfer from the motor to the chain. Conversely, chains with smaller drive links are best suited for lighter-duty chainsaw use, as they will have less overall power but may be advantageous when precision cutting is the goal.
It is important to note that there are multiple chainsaw chain sizes available (the common sizes are. 043”,. 058”,. 063”,. 325” and. 404”). Thus, it is important to make sure of the correct drive link size of a chainsaw chain before purchasing or installing it.
How do I tell the size of a file?
The size of a file can be determined in a few different ways depending on the type of file and which operating system you are using.
For Windows users, right click on a file and select Properties. This will open a window which will display the size of the file in kilobytes, megabytes, and/or gigabytes.
On Macs, users can select a file and hit Command+I to open an information window. This will display the size of the file in kilobytes and/or megabytes.
You can also check the size of a file through your command line/terminal window. The command ‘ls -al’ can be used to list the size of the file alongside other information regarding the file.
It is important to remember that the size of a file can be different based on the file type. For example, a .zip file may be much larger on disk than the actual files contained within it.
How do you file a chainsaw chain?
Filing a chainsaw chain is a simple yet important process for the health of your saw. It is important to file chains regularly to ensure its safety and prevent injury. To properly file your chainsaw chain you will need to have a filing guide, a round file, and a flat file.
First, you will want to make sure the chain is tensioned properly and that the chain is sharp enough, or too dull to sharpen. You will also want to check the depth gauges to make sure they’re at the proper depth.
Once everything is in check, it is time to grab the round file and the filing guide. The filing guide will ensure you to file the chain at the proper angles (these angles should be printed on the guide).
Place the filing guide onto the chain and the round file inside the guide hole, which should match the file size.
Now it’s time to file the chain. Push the file in the direction of the arrow, six or seven times while keeping two-thirds of the file inside the guide hole. At the end of every few strokes, raise the file up, twist it a few times and place it back into the guide hole.
The reason for this is so you don’t file too much from one side or leave and gouge marks. After a few strokes, check the depth gauges to see if the cut is even.
If needed, use the flat file for the depth gauge. To do this, place the flat file at a 90-degree angle and file the depth gauge from one side to another. Make sure the depth gauges lay flush on the guide.
Finally, check the chain for sharpness using a piece of paper. If the chain is sharper than the paper, the chain is sharpened and ready to be used.
What is the difference between .325 and 3/8 chain?
The difference between. 325 and 3/8 chain is the size. 325 chain is referred to as standard size, and 3/8 chain is referred to as pitch size. 325 (or standard size) chain has a pitch of. 050″ and uses 72 drivers, while 3/8 (or pitch size) chain has a pitch of.
063″ and uses 60 drivers. This results in 3/8 chain having nearly 20% more drive links than a. 325 chain, making it suitable for higher torque applications. Additionally,. 325 chain is made up of two sizes of driver links, whereas 3/8 chain is strictly made with the same size driver link.
This means that. 325 chain is more flexible and can provide multiple lengths that 3/8 chain does not. Lastly,. 325 chain is better for lighter saws, whereas 3/8 chain is typically used for large, high-power saws.
How do I know what file to use on my chainsaw?
When deciding which file to use on your chainsaw, it is important to first identify the type of chain and the manufacturer. Different chains require different sizes and types of files, and it’s important to not use the wrong type or size, as this can damage the chain.
Once you have identified the type of chain and manufacturer, you should refer to the chainsaw’s user manual. The manual should provide specific information about which type and size of file to use on the chain.
Additionally, it is important to note that some chainsaw files are designed for sharpening the top cutting edge of the saw teeth, while some are designed for sharpening the depth gauges on the side of the saw.
Again, the user manual should indicate which type of file to use where. Finally, it is advisable to purchase a high quality file that is made from hardened steel. Quality files will give you the best results, helping you to maintain your chainsaw’s performance and safety.
What pitch are Stihl chainsaws?
The pitch of the chainsaw chain used with Stihl Chainsaws is normally dependent on the model number of the specific saw. Generally, chainsaw chains for Stihl saws can range from 1/4” to. 404” in pitch.
The most popular pitch for Stihl Chainsaws is 3/8”. The large majority of Stihl Chainsaws come with a 3/8” pitch chain, with the exception of the Husqvarna 435 and 440, which come with. 325” pitch chains.
Additionally, the Stihl MS150C-E, MS192TC-E, MS200 & MS250 all feature 3/8” Picco chains. For a comprehensive list of Stihl chainsaw chains and their corresponding pitches, you can refer to the manufacturer’s website.
Can you use an Oregon chain on a Stihl bar?
The answer to this question depends on the specifics of the products you have. The chain size used in Stihl chainsaws is typically referred to as the “Pitch”, which is the size of the drive link on the chain.
In general, Stihl bars are compatible with the 0.325 inch Pitch chain, whereas the Oregon chains typically use the 3/8 inch Pitch chain.
However, it is worth noting that despite this general difference in Pitch, there are chains from both companies that are compatible with each other. For instance, the Oregon 90SG series chainsaw chain is compatible with the Stihl 91VGX series chainsaw chain with either a 0.
325 or 3/8 inch Pitch size. Similarly, the Stihl 65 Series chainsaw chain is compatible with the Oregon 160SDEA074 chainsaw chain in either the 0.325 or 3/8 inch Pitch sizes.
It is therefore important to check the specifications of your particular model of Stihl and Oregon chainsaw bars and chains to ensure compatibility. Additionally, you should choose chains and bars based on the size of the bar and the type of wood you are likely to be cutting.
Ultimately, if you do not clearly understand the specifications of the products you are working with, it is best to consult an expert before using a Stihl and Oregon chain together.
How do I identify my Husqvarna chain?
To identify your Husqvarna chain, it is important to understand the terminology used to describe the various components of a chainsaw chain. The size of the chain is determined by 3 components: the pitch, gauge and drive links.
The pitch is the distance between any three consecutive rivets divided by two. It’s typically written as a number, such as 3/8″ or. 404″, and determines the size of the drive links. The gauge is the width of the drive link where it meets the cutter, and is typically found by measuring the drive link body.
The drive link count is the number of drive links in your chain, which is the third way to measure the size of a chain. Your Husqvarna chainsaw manual should include the chain type and part number identification information.
If you don’t have the manual, you can look it up on the Husqvarna website. With this information, you can find the correct replacement chain by using the sizing chart provided in the Husqvarna chainsaw manual.
What is chainsaw pitch and gauge?
Chainsaw pitch and gauge refer to two different measurements used to describe chainsaws. Pitch is the size of the chain link – it’s usually measured in 1/8 inch increments, but it can also be measure in 1/4 inch increments.
The higher the pitch, the larger the chain link and the more teeth it will have per cut. Gauge refers to the thickness of the drive link (the part of the chain that attaches it to the chainsaw). Gauge is measured in thousandths of an inch (sometimes referred to as “thou”), with a lower gauge number indicating a thicker link.
You should always check the measurements of the chain you use to ensure that it is compatible with the saw you are using.
Are any STIHL products made in China?
No, STIHL does not currently manufacture any of its products in China. All STIHL products are produced in either Germany, the United States, or Switzerland. The company is highly dedicated to quality assurance and therefore has opted to retain the production of their products in these countries, in order to maintain their high quality standards.
STIHL does have a large manufacturing base in China, however, where they produce spare parts, accessories and other non-power equipment. The company’s factory in Shunde, China also produces a number of battery-powered machines and blowers, but these are only sold in China, not exported.
When did STIHL move to China?
STIHL began shifting its production operations to China in the late 2000s. It established its first production facility in Fujian province in 2008 and by 2012 had opened two additional production sites in Jiangsu and Guangdong provinces.
The transition to China allowed STIHL to offer cost-effective products while still maintaining high quality, and led to its continued expansion in international markets. By 2013, STIHL ranked as the world’s leading chainsaw maker.
Due to its success with production yield, reliability and cost savings, STIHL continues to produce some of its products in China to this day.
What country makes STIHL products?
STIHL products are made in Germany. STIHL is one of the world’s leading manufacturers of outdoor power tools, including chainsaws, blowers, trimmers, and more. The company was established by Andreas Stihl in 1926 as a chainsaw and saw blade production company.
STIHL has grown to become a global company with over 10,000 employees, offering products in 150 countries. The majority of STIHL’s production facilities are located in Germany, and the company also has production plants in Brazil, China, and the United States.
STIHL has a reputation for producing high-quality, reliable outdoor power equipment, and the company is constantly striving to innovate and improve their products.
What does STIHL mean in German?
STIHL is a German company that produces power tools and is one of the world’s leading manufacturers in the industry. The name STIHL is an acronym derived from the name of the original founder, Andreas Stihl, who was born in Germany in 1898.
The acronym stands for “Andreas STIHL Handwerker Ideen”, which translates to “Andreas STIHL craftsmen ideas”. The company has been in business since 1926 and produces a wide variety of outdoor power equipment, including chainsaws, trimmers, blowers, hedge trimmers, and more.
They also produce engine components that can be used with various power equipment brands. STIHL is committed to producing top-quality, durable power tools that are built to last, and are designed to provide both quality and reliability to users.
Is Husqvarna made in China?
No, Husqvarna is not made in China. Husqvarna is a Swedish-originated global power equipment brand that has been in the industry of outdoor power equipment for over 325 years. Husqvarna manufactures and distributes a wide range of outdoor power equipment across the world, but its headquarters is located in Stockholm, Sweden.
They have factories and distribution centers European countries like Italy, Germany, Poland and the Czech Republic, as well as factories and distribution centers in North, South and Central America. Though Husqvarna does have a significant presence in China, their products are not made in the country.
What percentage of STIHL products are made in USA?
Approximately 20% of all STIHL products are made in the United States. This number includes chain saws and power equipment such as trimmers, blowers, edgers and hedge trimmers. The rest of STIHL’s products are imported from other countries.
STIHL has plants in both Virginia Beach, Virginia and in 2016, an additional plant opened in Missouri. The products manufactured in these locations are primarily for the US and Canada markets. The US-made product range includes battery and gasoline-powered products and components.
Are STIHL and Husqvarna the same company?
No, STIHL and Husqvarna are not the same company. STIHL is a German company founded in 1926, whereas Husqvarna is a Swedish company founded in 1689. STIHL produces a wide range of outdoor power equipment including chainsaws, trimmers, blowers, and hedge trimmers, while Husqvarna offers a wide range of home products such as lawn mowers, snow blowers, and generators.
Both companies offer a range of products targeted at the consumer and professional market segments, but they are separate entities.
Does China make STIHL chainsaws?
No, China does not make chainsaws under the STIHL brand. STIHL is a German brand of outdoor power equipment that produces a range of products including chainsaws. All STIHL chainsaws, regardless of model or size, are manufactured in Germany, Austria, Brazil, or the United States.
STIHL maintains a strict policy of quality control over its methods of production and materials used in the manufacturing process, and its products are trusted to provide reliable performance. With their commitment to quality and their reputation for dependable performance, STIHL chainsaws are a reliable choice for those looking for a new chainsaw.
Where is Husqvarna manufactured?
Husqvarna is a Swedish multinational group headquartered in Stockholm, Sweden. It is one of the world’s largest producers of outdoor power products including lawn mowers, chainsaws, robotic lawn mowers, trimmers, garden tractors, snow throwers, edgers and other outdoor power tools.
The company also produces a range of kitchen and garden appliances, and they are renowned for their high quality and stylish design.
Husqvarna products are manufactured in a range of countries around the world, including Brazil, Mexico, the United States, Canada, the United Kingdom, Austria, France, Germany, Italy, the Czech Republic, Spain, Croatia, Denmark, Poland, Russia, Sweden and China.
The majority of components and materials used to make these products are sourced locally in these countries. Assembled Husqvarna products are then distributed and sold based on regional markets and consumer needs.
Husqvarna’s robotic lawn mowers are produced in Sweden, Austria, and France.