A Festool track saw blade has a diameter of 72mm (2.827 inches). It consists of 48 teeth with a 5 degree hook angle and an offset of 0.2mm. The blade also has a hole diameter of 16mm (0.630 inches). Different blades may come in different sizes depending on the model of the saw; however, generally Festool track saw blades are 72mm in diameter.
The size of the blade is suitable for a wide range of cutting materials, including plastic, soft metals, aluminum, copper, and hard woods.
Can you use Festool track saw on Makita track?
No, you cannot use a Festool track saw on a Makita track. Festool and Makita both make their own proprietary track systems. Therefore, while they may have some similarities, they are not interchangeable.
Additionally, it is important to note that Festool track saws are made to work with the Festool track system which has a standardized width, which would not fit on a Makita track. Additionally, the Festool track saw blades correspond to that specific track width.
Therefore, if you used your Festool saw on a Makita track, the blade may not fit properly and could create an unsafe situation. Lastly, the saw may not properly lock onto the track due to inconsistencies in the fit, which could lead to an unstable situation.
In summary, using a Festool track saw on a Makita track is not recommended.
Will Festool parallel guide work on Makita track?
No, Festool parallel guide will not work on Makita track. The Festool parallel guide is designed to work exclusively with Festool tracks, and it will not work with any other type of track. The Festool guide is designed with specific dimensions and features that allow it to perfectly align with and fit on Festool track, and it will not fit on any other type of track.
Additionally, Makita tracks are generally constructed differently from Festool tracks, and trying to use a Festool parallel guide on a Makita track may cause damage. If you have a Makita track, you need to use a guide that is specifically designed for Makita tracks.
What size blade does a Makita track saw use?
Makita track saws use a 7-1/4″ blade. This blade size is the most commonly used size and length for track saws because it provides the best balance of size and power for precision cuts. The blade is designed to make clean and consistent cuts with minimal material waste.
Additionally, the blades are designed to cut through wood, plastic, drywall and other materials with ease, making them suitable for a variety of woodworking projects.
What is the blade for Makita plunge saw?
The blade for the Makita plunge saw is a 6-1/2-inch 40-tooth ATB laminated saw blade. This blade is designed for accurate plunge cutting of a variety of hard and soft woods, as well as cutting of composite materials like plywood and MDF.
This blade offers an ultra-smooth finish with minimal splintering, and thanks to its high regard for precision and accuracy, it will provide smooth and accurate plunge cuts time and time again. This blade is compatible with Makita model numbers SP6000K, SP6000JK and SP6000K1.
How do you change the blade on a Makita track saw?
Changing the blade on a Makita Track Saw is a relatively easy but important process that should be done correctly for safety and precise cuts. To start, float the power switch to “off,” unplug the saw from the outlet, and remove the saw from its track.
Next, remove the three screws from the side of the saw with the Phillips screwdriver and slide the blade guard open. Loosen the two screws on the saw blade collar, and use a wobble to loosen the blade.
Remove the blade from the saw, taking note of the direction of its teeth. Place the new saw blade in the same position as the old blade, making sure to secure it well with the saw blade collar screws.
Finally, reattach the blade guard, screws, and power cord, plug the saw back in, and begin tested the saw on scrap wood to ensure its working properly.
Does Makita track saw have anti Kickback?
Yes, the Makita Track Saw has anti-kickback features. This is a valuable safety feature that helps prevent kickback when cutting. The saw features a guard that acts as a disc brake and is designed to stop the blade completely within one second.
The guard is cutout to accommodate different materials and a riving knife also helps to reduce the chance of kickback. The saw also has an overload protection feature which stops power to the motor if it senses overload or a potential overload situation.
All of these features work together to help ensure that the saw remains safe and stable during operation.
How do you square a Makita miter saw?
Squaring a miter saw is an essential part of keeping your saw accurate. To square your Makita miter saw, begin by adjusting the positive miter stop to 90 degrees. Look at the table and fence relative to the blade – if they aren’t mirrored, you need to adjust the miter stop.
Adjust the miter stop with the knob on the left side of the saw until the table is squared with the fence.
Next, you will need to adjust the miter arm and table. Do a test cut, then use a miter square to check for accuracy. If it’s off, use the bevel adjustment knob to adjust the table. Keep adjusting until the blade is exactly perpendicular to the fence for accuracy.
Finally, check for accuracy. Place a piece of scrap wood in the miter saw and check with the miter square again. If you still have any discrepancies, loosen the miter arm, adjust the angle and tighten it back down.
If all is square, your saw is good to go. When using your saw, be sure to make small test cuts. This will help you adjust any discrepancies and make sure your cuts are accurate.
How do you change a plunge saw blade?
Changing a plunge saw blade requires that the saw be unplugged from its electrical source before beginning any work. Before starting to change the blade itself, it is important to loosen the blade guard by unscrewing the two loops at the back of the saw.
Doing this will allow the guard to move freely, giving you space to work on the blade itself.
Once the guard is loosened, use an allen key to loosen the locking screws that are attached to the front of the saw. These screws should be loosened until they pop out of the saw. With the screws removed, the blade housing can be separated from the saw.
Locate the blade collar and pull it away from the saw, which should allow you to remove the blade itself.
To install a new blade, place the blade into the collar first, making sure it is centered properly. Place the collar back into the saw so that it covers the blade, and then reattach the locking screws to the front of the saw.
Make sure that the screws are tightened securely before replacing the blade guard. Finally, plug the saw back in and test that that the blade is securely in place.
Can Festool blades be sharpened?
Yes, Festool blades can be sharpened. The blades on Festool products are made from high-quality steel, so they can be safely and effectively sharpened. Professional sharpening services typically offer the best and most efficient sharpening results.
If you decide to try and sharpen the blades yourself, you will need to find the right tool for the job. An electric diamond sharpening stone is often recommended as it is designed specifically to sharpen blades as sharp as they were when they were new.
Additionally, it is important to clean and lubricate the blade before sharpening. Doing this ensures that the blade is ready for use after sharpening. Proper maintenance of Festool blades will extend their lifespan and ensure the best possible performance.
Do Festool blades fit Makita track saw?
No, Festool blades do not fit Makita track saws, as the two saws use blades of different sizes, with differing pitches and number of teeth. While the overall design of both track saws is similar, the Festool saw uses a T-shank blade, while the Makita saw uses a U-shank blade.
Additionally, the Festool has 40 teeth, while the Makita track saw has 32 teeth. Furthermore, the Festool T-shank blade has 3/8” pitch, and the Makita U-shank blade has 1/8” pitch, making them incompatible.
Can you use wd40 on saw blades?
No, you should not use WD40 on saw blades. WD40 is primarily used to lubricate and protect metal surfaces from corrosion, which is not the main concern when using a saw blade. In addition, WD40 may actually harm the performance of a saw blade due to its relatively thin properties, as WD40 can evaporate quite quickly, leaving behind a potentially corrosive residue.
Furthermore, saw blades are typically sharpened with a grinding wheel, and although WD40 may help protect the blade and prolong its life, it can also lead to clogging of the tiny grinding particles when it is used frequently, which can reduce the sharpness of the saw blade significantly.
In short, it is best to stick to the proper lubricants and cleaners designed specifically for saw blades.
How many times can you sharpen a table saw blade?
It depends on several factors, including the type of table saw blade you have and the material you are cutting. Generally, you can sharpen a table saw blade up to 10 times before it needs to be replaced.
However, if you are cutting softwood or plywood, this number can be much lower. You can also extend the lifespan of your blade by ensuring that it is properly maintained, sharpened, and lubricated. Additionally, blades used to cut hardwoods will require more regular sharpening than blades used to cut softwoods.
If you are not sure how many times a particular blade can be sharpened, it is best to consult a professional before attempting to sharpen it yourself.
Are saw blades worth sharpening?
Yes, saw blades are definitely worth sharpening. Having a sharp saw blade will make cuts easier and safer and will give a much higher quality cut. Sharp blades also require less effort to cut, so you will be able to complete your tasks more quickly.
Additionally, sharpening blades can save you money because you won’t need to buy a new saw blade each time yours gets dull. You will also be able to save time since sharpening blades doesn’t require a lot of effort and can be done with simple tools.
All in all, if you are looking for a high quality cut, it is always a good idea to have a sharp saw blade, and sharpening your existing blades can be a cost and time effective way to achieve that goal.
Does cutting PVC dull saw blade?
Yes, cutting PVC will eventually dull your saw blade, just like it would dull any other saw blade when cutting various materials. This is because the rigid nature of PVC requires a very sharp blade with hard, sharp teeth to make clean, smooth cuts.
PVC is a hard plastic material that is not only resistant to scratching and scuffing, but also resists cutting from any saw. As the PVC is cut, small bits of the material cling to the edge of the saw blade and gradually wear away at the sharpness of the edge.
As you continue to cut through the PVC, the saw blade will eventually become dulled, regardless of the type of saw blade you are using. If you experience this, it is best to use a new saw blade to maintain a clean, smooth cut.
How many teeth does a plunge saw have?
A plunge saw typically has a crosscut blade that has anywhere from 40 to 80 teeth. Some plunge saws also offer blades designed for specialized purposes with a larger number of teeth, such as blades designed for cutting laminate with 120 teeth.
Typically the higher the number of teeth on a blade the smoother and more precise the cut will be. The type of material that you are cutting as well as the desired finish of the cut can help determine what type of blade and number of teeth would be appropriate for the job.
Is it better to have more or less teeth on a saw blade?
It is hard to say whether it is better to have more or less teeth on a saw blade since this depends on the type of job that needs to be completed. Generally speaking, more teeth on a saw blade will create a smoother cut, but might slow down the saw and create a great deal of friction.
Less teeth on a saw blade might cut quickly and reduce friction, but it could also leave a rougher cut. For most general purpose sawing applications, it is best to use a saw blade with more teeth (14-20 teeth) for a smoother and more refined finish.
For jobs that require faster cutting or require thicker material to be cut, a saw with fewer teeth (7-10 teeth) can be used. Ultimately, the amount of teeth will depend on the saw blade material, the type of cutting being done, the thickness of material being cut, and the desired outcome.
What is a 40 tooth saw blade used for?
A 40 tooth saw blade is a common type of blade used for cutting materials such as wood and metal. It is typically used in table saws, radial arm saws, and miter saws, and is capable of making a variety of cuts including crosscuts, rip cuts, and miter cuts.
40 tooth saw blades provide a smooth and accurate cut, making them ideal for making straight cuts in boards, panels and other materials. They are typically available in either carbide-tipped or natural-tooth styles, and can be used to cut a variety of wood and metal materials, depending on the blade type and type of saw being used.
They are also suitable for making certain types of decorative cuts, such as grooves, rabbets, and dadoes.
What are the 3 basic types of circular saw blades?
The three basic types of circular saw blades are designed to help you with whatever project you may be tackling.
The first type is the standard blade, which is usually the most common and general-purpose option for saws. It is designed for fast, cross-cutting and ripping applications in materials like softwoods, hardwoods, and plywood.
This is the blade you see most frequently in home improvement stores.
The second type is the combination blade, which has a combination of alternating teeth that are designed for both cross-cutting and ripping. This type of blade is best used when doing both tasks in one cut.
It is suitable for cutting through a variety of materials, including plywood, hardwoods, and softwoods.
The final type is the miter blade, which has negative hook-shaped teeth to help make cleaner cuts when doing mitered cuts. This blade is designed specifically for making mitered cuts through molding, baseboards, and trim.
Because of its specialized teeth, it is not suitable for other types of cross-cutting and ripping applications.
These are the three basic types of circular saw blades, which are all designed to help you get your task done with ease. Depending on the project you are doing and type of material, you can choose your blade accordingly.
What is ATBR saw blade?
ATBR saw blades are a type of saw blade typically used on miter saws, chop saws, and radial arm saws for cutting wood or metal. They have a specialized tooth design that produces ultra-smooth, low-friction cutting that results in highly accurate cuts.
ATBR saw blades have a triple chip grind (TCG) that offers superior performance and extra durability. The teeth are precision-sharpened to reduce cutting noise and they are coated with a titanium-nitride finish to provide improved chip ejection and resistance to wear.
The small-diameter tip reduces vibration and extends blade life. ATBR saw blades are a great choice when precision and accuracy are the main objectives.