The size of zipper you need for an 18 inch pillow will depend on the style of pillow you are making, as well as the thickness of the materials you are using. Generally, for a style of pillow like a traditional bolster, you will need an 18 inch zipper, as the style of the bolster requires enough room for adequate stuffing without the materials bunching up at the opening or preventing the zipper from closing.
If you are using thinner fabrics, you may be able to get away with using a slightly shorter zipper than the full 18 inches. However if the fabric is more thick or bulky you may need to opt for a longer zipper.
A continuous zipper, which features a trace chain of teeth, could also be used to provide more space for larger fabric materials or a fuller stuffing. Ultimately, the best zipper size for your 18 inch pillow will depend on the type of pillow, the quality of the fabrics, and how much stuffing you need.
How do you make a pillow with a zipper?
Making a pillow with a zipper is relatively easy. Here’s what you’ll need: material for the pillow, such as cotton, fleece, faux fur, or other fabric (approximately 2 yards), scissors, pins, a zipper (at least 8 inches wide), thread, sewing machine, and stuffing.
Begin by cutting two pieces of the fabric a few inches larger than the size of the pillow you’d like to make. Next, lay the pieces of fabric on top of each other and pin around the edges. Cut a hole in the middle of the pinned edges big enough to fit your zipper.
Place the zipper in the hole and pin it in place. Thread the machine and sew around all 3 edges of the cut hole to attach the zipper in place.
Once this is done, sew around the outer edges of the pillow, but leave a 5-inch hole. Next, turn the pillow fabric inside out and stuff the pillow with filling. Use the remaining 5-inch hole to close the pillow, using your sewing machine to sew it shut.
And that’s it! Depending on the material you used, consider adding a few more stitches for extra strength, and you have a pillow with a zipper.
How many yards of fabric do I need for a 18×18 pillow?
If you are looking to make an 18×18 pillow, you will need approximately 1.5 yards of fabric. To calculate the amount of fabric needed for a pillow, you will need to measure the length and width of the pillow and multiply them together.
For an 18×18 pillow, the length is 18 inches and the width is 18 inches. When multiplied together, it equates to 324 square inches. To convert this to yards, divide it by 36 because there are 36 inches in a yard.
The result is 9 yards, however, you will only need 1.5 yards because there is no need for an entire yard when measuring the edges and seams.
How do I know what size zipper I need?
If you need to purchase a zipper, it’s important to understand what size you need. Zipper sizes are often determined by the width of the zipper tape, which is the fabric portion of the zipper. When referring to the size of a zipper, the number refers to the width of the zipper tape.
For example, if a zipper is labeled as size 5, the width of the zipper tape will be 5mm. Different types of zippers may offer different sizes, so it’s important to know what type of zipper you need for the project you are completing.
To determine the best size zipper you need for your project, you should consider how the zipper will be used. If the zipper will be used for apparel, a standard size 5 or size 7 zipper is common, though sizes may vary depending on the application.
If the zipper will be used for luggage or outdoor apparel, size 10 and size 10V are commonly used. For upholstery, size 8 or up to size 25 may be the appropriate size.
Another factor to consider when selecting a zipper size is the gauge. Zippers with a standard gauge have a coil that is approximately 0.5mm in diameter and are commonly used in lighter-weight garments.
Heavy-duty gauges are made with a coil that measures approximately 0. 8mm in diameter and are used on heavier-duty products.
Overall, it’s important to know what size zipper you need for your project as well as the type of zipper and gauge that are best suited for the application. Additionally, if the zipper is for an item of apparel, the style of the zipper should also be considered, such as a center-front closure that is most commonly used.
What kind of zipper do you use for pillows?
The kind of zipper you should use for pillows depends on the type of pillow and the desired level of convenience needed to get it open and back closed. Zippers most commonly used for pillows are plastic coil zippers and nylon coil zippers.
Plastic zippers typically come with large gap teeth and a box and pin slider which makes them easy to open and close. Nylon coil zippers are slightly more durable and come in a range of colors and sizes.
They are considerably stronger than plastic coil and have a more subtle aesthetic. Overall, both plastic and nylon coil zippers are great options for pillows, although if you need a stronger zipper for a pillow made of thicker material, such as a mattress pillow, then a metal zipper may be a better option.
What size is a regular pillow?
A regular sized pillow usually measures 20″ x 26″, although the size may vary slightly depending on the manufacturer. Generally, a regular sized pillow will fit inside a standard size pillowcase. Standard size pillowcases are 20″ x 30″, meaning there is extra fabric to accommodate a slightly larger pillow or allow for less of a pillow to slightly loosen the fit.
Regular sized pillows are typically used to provide comfort and cushioning on a bed, but they can also be used for pillows on couches, chairs, etc.
What is the size of a standard bed pillow?
The standard size for a bed pillow is 20 inches by 26 inches, although some may be slightly larger or smaller. A standard bed pillow should be large enough to provide adequate neck, head, and shoulder support for a comfortable sleep.
It also should be large enough to provide a full-body sleeping experience. Standard bed pillows are generally made with materials such as synthetic or natural fibers, such as cotton or wool, although there are many other choices available.
They are usually filled with either down, feathers, or a combination of the two.
How do you put a zipper in a pillow cover?
Putting a zipper in a pillow cover is a fairly simple sewing project that requires basic sewing supplies and a bit of time. To begin, you’ll need a zipper, a seam ripper, scissors, a straight pin, a needle and thread, marking chalk, fabric for the pillow cover, and a sewing machine.
First, cut two pieces of fabric for the pillow cover, making sure the edges are symmetrical and the sides are the same length. Take one of the pieces and fold the top edge over twice to create a casing for the zipper.
Pin the hem in place and mark the center of the edge with the marking chalk.
Then, use your seam ripper to unzip the zipper and remove the portion of it that will fit into the casing. Place the zipper into the casing, pinning it in place. Sew around the zipper using a zigzag stitch and making sure to go over the zipper teeth slowly and carefully.
Once the side of the zipper is attached, take the other piece of fabric and lay it right-side up on top of the zipper. Line up the edges and stitch the two pieces of fabric together, leaving an opening in order to insert the other portion of the zipper.
Use the same zigzag stitch to attach the zipper.
Now, unzip the zipper and place the pillow cover right-side out. Now, pin the two short ends of the zipper together, close the zipper, and sew across the ends to keep the zipper in place.
Finally, close the opening you left for the zipper by stitching around the edges. Once the seams are reinforced and the pillow cover is finished, stuff it with the appropriate filling and enjoy.
Is piping necessary on cushions?
Piping is not always necessary on cushions, depending on the look you’re going for. However, if you want a classic, tailored look, then adding piping is a great way to achieve that. Piping provides a clean, crisp look that adds detail to your cushions.
Plus, it helps to preserve the shape of the cushion and makes it more durable. Additionally, it adds texture and can be a great way to mix and match colors. On the other hand, it can be time-consuming to install and if done improperly, can look unsightly.
Ultimately, it really depends on the look you’re going for as to whether piping is necessary on your cushions.
How do you make a cushion cover out of a pipe?
Making a cushion cover out of a pipe is a simple project that anyone with basic sewing skills can tackle. Here are the steps you’ll need to follow to make a cushion cover out of a pipe:
1. Measure and cut the pipe to the desired length. Make sure to leave at least 2 inches of fabric allowance on each side.
2. Sand down the edges of the pipe to soften them and make them easier to work with.
3. Cut two pieces of fabric that are 2 inches wider than the length of your pipe. Make sure to leave enough fabric to create an overlapping effect when you sew the pieces together.
4. Place your two fabric pieces right sides together. Using a sewing machine, stitch along the edges, making sure to leave a 2-inch seam allowance.
5. Turn the fabric so that the right side is facing out and stuff the pipe through the opening.
6. Hand-stitch the gap closed and top-stitch along the edges for a finished look.
And that’s it- your cushion cover out of a pipe is finished. Add some stuffing to the fabric, and you have a finished cushion cover ready to use.
How do you sew cording on a cushion?
Sewing cording on a cushion is relatively straightforward. To get started, The first step is to measure the length of cording needed to cover the cushion. Once the length has been determined, cut the cording to size and then begin threading it through a hand-sewing needle.
A cording foot for the sewing machine can also be used as an alternative to hand stitching. If using a sewing machine, simply adjust the thread tension as needed in order to make sure it passes through the cording properly.
Next, start by aligning the ends of the cording to the edges of the cushion, making sure the cording is taut but not stretched taut. Starting at one end of the cushion, begin hand sewing the cording to the fabric of the cushion.
Use a whip stitch and work your way around the cushion until you have reached the end. If using a sewing machine, set it to a straight stitch and stitch in the same manner.
Once all the stitching is complete, trim any excess cording and give the cushion a press with a iron with the steam feature on for a professional, finished look. And you are done!
How do you install a piping cord?
Installing a piping cord is a relatively easy task. All you need is the piping cord, a cord threaded on one end (typically with a needle on one end to ensure the cord stays in place), and a tapestry needle.
To start, measure your piping cord for the desired length. Then, take the cord and thread it through the needle. It’s important to make sure the needle is threaded through the middle of the cord; if the needle is too close to one side of the cord, it won’t fit properly in the fabric.
Once you’ve done that, take the needle and start to run it through the casing of the fabric. Depending on the fabric, it may be easier to start at one end of the casing and work your way around. As you do so, gently pull the cord to remove any slack.
It’s important to make sure the cord is not too tight or too loose within the casing.
Once the cord is in place, use the needle to pull each end of the cord until they meet in the middle. Now, tie a knot in the end of the cord to keep it secure.
Finally, use the tapestry needle to sew the ends of the cord in the casing. Start at one end of the casing and stitch across, creating a firm seam of the cord. Do this for the entire length of the casing.
Once at the end, you’re done and your piping cord should look perfect.
What is concealed zipper?
A concealed zipper, also known as an invisible zipper, is a type of zipper where the fastening mechanism is hidden and the zipper is nearly invisible when closed. It’s mostly used for clothing like skirts, dresses, and jackets, where the zipper would normally be visible.
This makes for a much more aesthetic closure. It is usually located at the back, but can also be found along the side seams.
A concealed zipper is also sometimes used for interior furniture and home décor from pillows and duvets to bags and purses. It’s not only aesthetically pleasing but also provides an added layer of strength and security.
The concealed zipper consists of two parts: the zipper slider and the pull tab. The zipper slider is the metal or plastic piece at the bottom of the zipper that moves back and forth. The pull tab is a tab at the bottom of the zipper slider that can be pulled to open the zipper.
To insert a concealed zipper into a garment, it is first necessary to mark the fabric where the zipper will be placed. Then the zipper is basted in place by hand or machine before the zipper slider and pull tab are attached, and the fabric is closed around the zipper teeth.
Finally, the top and bottom are finished and the zipper is complete.
How do you sew an invisible zipper with a regular presser foot?
To sew an invisible zipper with a regular presser foot, you will need to make a few adjustments beforehand. First, switch presser feet to one that has a zipper foot. If you don’t have one, many regular feet have an extension that can allow it to fit over a zipper.
Then, you will need to make sure that your zipper is facing the right direction. Right side should match right side of the garment and the wrong side should match the wrong side. You can adjust the zipper teeth to open or close the distance between the edges.
Once your zipper is ready, place it on the fabric with the back side of the fabric inside the zipper. Pin the two sides of the fabric making sure to keep the middle of the zipper in the center of the fabric.
Now, you can use the zipper foot to slowly sew the zipper in place, following the teeth of the zipper and staying as close as you can. Make sure to backstitch once at the start and finish.
Once the zipper is sewn into place and in the correct position, you can use your normal presser foot to sew the two sides of the fabric together, making sure to stay behind the zipper and keep the zipper open.
Once you have finished sewing, simply close the zipper and you have a successful invisible zipper!.
What is the difference between an invisible zipper and a regular zipper?
The main difference between an invisible zipper and a regular zipper is the type of teeth used. A regular zipper has exposed teeth on either side of the zipper, enabling it to be opened and closed using a slider.
An invisible zipper, on the other hand, has teeth on one side that are tucked inside fabric and a color-coordinated slider on the other side, making it invisible when the zipper is closed.
Invisible zippers are commonly used in garments such as skirts, dresses, and formal wear, as they give a neater and cleaner finish. They can also be used in other items such as bags, pillows, and cushions.
The smaller, finer teeth of an invisible zipper also makes it stronger and more durable than a regular zipper. On the other hand, regular zippers are wider and can be used for a range of applications, such as jackets, jeans, or bags with heavier fabric.
What does an invisible zip look like?
An invisible zip, also known as a concealed zip, is a type of zipper that is designed to be virtually invisible when the garment is zipped up. It consists of two rows of teeth (same as a regular zipper) with smaller, narrower teeth set in between each row of larger teeth.
The smaller teeth are designed to be almost unseen. An invisible zip is usually finished with a small hook or tab at the end to help the zipper pull stay in the desired position which further helps to make it “invisible.
” It is most commonly used in high-end fashion garments, as it is often preferred aesthetically for its streamlined and almost undetectable look.